5,145 research outputs found
Thermal analysis comparison between two random glass fibre reinforced thermoplastic matrix composites bonded by adhesives using microwaves: preliminary results
[Abstract]: This paper compares the thermal analysis of two types of random glass fibre reinforced thermoplastic matrix composites joined by adhesives using microwave energy. Fixed frequency, 2.45 GHz, microwave facility is used to join thirty three percent by weight random glass fibre reinforced polystyrene composite [PS/GF (33%)] and thirty three percent by weight random glass fibre reinforced low density polyethylene composite [LDPE/GF (33%)]. The facility used is shown in Figure 1. With a given power level, the composites were exposed to various exposure times to microwave irradiation. The primer or coupling agent used was 5-minute two-part adhesive. The heat distribution of the samples of the two types of composites was analysed and compared. The relationship between the heat distribution and the lap shear strength of the samples was also compared and discussed
Unusual persistence of superconductivity against high magnetic fields in the strongly-correlated iron-chalcogenide film FeTe:O
We report an unusual persistence of superconductivity against high magnetic
fields in the iron chalcogenide film FeTe:O below ~ 2.5 K. Instead of
saturating like a mean-field behavior with a single order parameter, the
measured low-temperature upper critical field increases progressively,
suggesting a large supply of superconducting states accessible via magnetic
field or low-energy thermal fluctuations. We demonstrate that superconducting
states of finite momenta can be realized within the conventional theory,
despite its questionable applicability. Our findings reveal a fundamental
characteristic of superconductivity and electronic structure in the
strongly-correlated iron-based superconductors.Comment: 10 pages, 3 figure
Tunable coupling to a mechanical oscillator circuit using a coherent feedback network
We demonstrate a fully cryogenic microwave feedback network composed of
modular superconducting devices connected by transmission lines and designed to
control a mechanical oscillator coupled to one of the devices. The network
features an electromechanical device and a tunable controller that coherently
receives, processes and feeds back continuous microwave signals that modify the
dynamics and readout of the mechanical state. While previous electromechanical
systems represent some compromise between efficient control and efficient
readout of the mechanical state, as set by the electromagnetic decay rate, the
tunable controller produces a closed-loop network that can be dynamically and
continuously tuned between both extremes much faster than the mechanical
response time. We demonstrate that the microwave decay rate may be modulated by
at least a factor of 10 at a rate greater than times the mechanical
response rate. The system is easy to build and suggests that some useful
functions may arise most naturally at the network-level of modular, quantum
electromagnetic devices.Comment: 11 pages, 6 figures, final published versio
Study of fuel cell on-site, integrated energy systems in residential/commercial applications
Three building applications were selected for a detailed study: a low rise apartment building; a retail store, and a hospital. Building design data were then specified for each application, based on the design and construction of typical, actual buildings. Finally, a computerized building loads analysis program was used to estimate hourly end use load profiles for each building. Conventional and fuel cell based energy systems were designed and simulated for each building in each location. Based on the results of a computer simulation of each energy system, levelized annual costs and annual energy consumptions were calculated for all systems
Initialization by measurement of a two-qubit superconducting circuit
We demonstrate initialization by joint measurement of two transmon qubits in
3D circuit quantum electrodynamics. Homodyne detection of cavity transmission
is enhanced by Josephson parametric amplification to discriminate the two-qubit
ground state from single-qubit excitations non-destructively and with 98.1%
fidelity. Measurement and postselection of a steady-state mixture with 4.7%
residual excitation per qubit achieve 98.8% fidelity to the ground state, thus
outperforming passive initialization.Comment: 5 pages, 4 figures, and Supplementary Information (7 figures, 1
table
Relevance of the Heisenberg-Kitaev model for the honeycomb lattice iridates A_2IrO_3
Combining thermodynamic measurements with theoretical density functional and
thermodynamic calculations we demonstrate that the honeycomb lattice iridates
A2IrO3 (A = Na, Li) are magnetically ordered Mott insulators where the
magnetism of the effective spin-orbital S = 1/2 moments can be captured by a
Heisenberg-Kitaev (HK) model with Heisenberg interactions beyond
nearest-neighbor exchange. Experimentally, we observe an increase of the
Curie-Weiss temperature from \theta = -125 K for Na2IrO3 to \theta = -33 K for
Li2IrO3, while the antiferromagnetic ordering temperature remains roughly the
same T_N = 15 K for both materials. Using finite-temperature functional
renormalization group calculations we show that this evolution of \theta, T_N,
the frustration parameter f = \theta/T_N, and the zig-zag magnetic ordering
structure suggested for both materials by density functional theory can be
captured within this extended HK model. Combining our experimental and
theoretical results, we estimate that Na2IrO3 is deep in the magnetically
ordered regime of the HK model (\alpha \approx 0.25), while Li2IrO3 appears to
be close to a spin-liquid regime (0.6 < \alpha < 0.7).Comment: Version accepted for publication in PRL. Additional DFT and
thermodynamic calculations have been included. 6 pages of supplementary
material include
Evolution of Fermion Pairing from Three to Two Dimensions
We follow the evolution of fermion pairing in the dimensional crossover from
3D to 2D as a strongly interacting Fermi gas of Li atoms becomes confined
to a stack of two-dimensional layers formed by a one-dimensional optical
lattice. Decreasing the dimensionality leads to the opening of a gap in
radio-frequency spectra, even on the BCS-side of a Feshbach resonance. The
measured binding energy of fermion pairs closely follows the theoretical
two-body binding energy and, in the 2D limit, the zero-temperature mean-field
BEC-BCS theory.Comment: 5 pages, 4 figure
- …