Comparative indoor and outdoor stability measurements of polymer based solar cells

We report comparative indoor and outdoor stability testing of organic solar cells based on a blend between a donor-acceptor polyfluorene copolymer and a fullerene derivative. The outdoor testing was conducted for a period over 12,000 hours in Sheffield, England, with a Ts80 lifetime determined in excess of 10,000 hours (420 days). Indoor lifetime testing was performed on solar cells using a solar simulator under a constant irradiance of 1000 W/m(2) for more than 650 hours. We show that under the conditions explored here, device degradation under the two sets of conditions is approximately dependent on the absorbed optical energy dose

Ambient fabrication of flexible and large-area organic light-emitting devices using slot-die coating

The grand vision of manufacturing large-area emissive devices with low-cost roll-to-roll coating methods, akin to how newspapers are produced, appeared with the emergence of the organic light-emitting diode about 20 years ago. Today, small organic light-emitting diode displays are commercially available in smartphones, but the promise of a continuous ambient fabrication has unfortunately not materialized yet, as organic light-emitting diodes invariably depend on the use of one or more time- and energy-consuming process steps under vacuum. Here we report an all-solution-based fabrication of an alternative emissive device, a light-emitting electrochemical cell, using a slot-die roll-coating apparatus. The fabricated flexible sheets exhibit bidirectional and uniform light emission, and feature a fault-tolerant >1-μm-thick active material that is doped in situ during operation. It is notable that the initial preparation of inks, the subsequent coating of the constituent layers and the final device operation all could be executed under ambient air

Comparative study: the effect of annealing conditions on the properties of P3HT:PCBM blends

This paper presents a detailed study on the role of various annealing treatments on organic poly(3-hexylthiophene) and [6]-phenyl-C61-butyric acid methyl ester blends under different experimental conditions. A combination of analytical tools is used to study the alteration of the phase separation, structure and photovoltaic properties of the P3HT:PCBM blend during the annealing process. Results showed that the thermal annealing yields PCBM ‘‘needle-like’’ crystals and that prolonged heat treatment leads to extensive phase separation, as demonstrated by the growth in the size and quantity of PCBM crystals. The substrate annealing method demonstrated an optimal morphology by eradicating and suppressing the formation of fullerene clusters across the film, resulting in longer P3HT fibrils with smaller diameter. Improved optical constants, PL quenching and a decrease in the P3HT optical bad-gap were demonstrated for the substrate annealed films due to the limited diffusion of the PCBM molecules. An effective strategy for determining an optimized morphology through substrate annealing treatment is therefore revealed for improved device efficiency.Web of Scienc

Macro-scale transport of the excitation energy along a metal nanotrack: exciton-plasmon energy transfer mechanism

Presently we report (i) excited state (exciton) propagation in a metal nanotrack over macroscopic distances, along with (ii) energy transfer from the nanotrack to adsorbed dye molecules. We measured the rates of both of these processes. We concluded that the effective speed of exciton propagation along the nanotrack is about 8 × 107 cm/s, much lower than the surface plasmon propagation speed of 1.4 × 1010 cm/s. We report that the transmitted energy yield depends on the nanotrack length, with the energy emitted from the surface much lower than the transmitted energy, i.e. the excited nanotrack mainly emits in its end zone. Our model thus assumes that the limiting step in the exciton propagation is the energy transfer between the originally prepared excitons and surface plasmons, with the rate constant of about 5.7 × 107 s-1. We also conclude that the energy transfer between the nanotrack and the adsorbed dye is limited by the excited-state lifetime in the nanotrack. Indeed, the measured characteristic buildup time of the dye emission is much longer than the characteristic energy transfer time to the dye of 81 ns, and thus must be determined by the excited state lifetime in the nanotrack. Indeed, the latter is very close to the characteristic buildup time of the dye emission. The data obtained are novel and very promising for a broad range of future applications.PR Institute of Functionalized Nanomaterials NASA EPSCoR grant (NASA Cooperative Agreement) NNX15AK43A National Centre for Research Resources NIH-NCRR-G12-RR03035 NIMHD-G12-MD007583info:eu-repo/semantics/publishedVersio

Novel Topical Microbicides Through Combinatorial Strategies

Purpose Developing microbicides for topical epithelial applications is extremely challenging, as evidenced by the scarcity of approved products even after decades of research. Chemical enhancers, including surfactants, are known to be effective antimicrobial agents but are typically toxic towards epithelial cells. Here, we report on the discovery of unique surfactant formulations with improved safety and efficacy profile for epithelial applications, via a combination of high throughput screening techniques. Methods Over three-hundred formulations derived from nine surfactants were screened for antibacterial properties against E. coli in vitro. A subset of these formulations showed high antibacterial activity and was screened for cytotoxicity in vitro. Formulations showing high antibacterial activity and reduced cytotoxicity compared to their individual components were tested for efficacy against B. thailendensis, a model for melioidosis-causing B. pseudomallei. Results Lead formulations showed lower toxicity towards epidermal keratinocytes, with LC50 values up to 3.5-fold higher than their component surfactants, while maintaining antibacterial efficacy against B. thailendensis. Conclusions Our results demonstrate that such a combinatorial screening approach can be used for designing safe and potent microbicides for epithelial applications

SAVVY® (C31G) Gel for Prevention of HIV infection in Women: A Phase 3, Double-Blind, Randomized, Placebo-Controlled Trial in Ghana

The objective of this trial was to determine the effectiveness of 1.0% C31G (SAVVY) in preventing male-to-female vaginal transmission of HIV infection among women at high risk.This was a Phase 3, double-blind, randomized, placebo-controlled trial. Participants made up to 12 monthly visits for HIV testing, adverse event reporting, and study product supply. The study was conducted between March 2004 and February 2006 in Accra and Kumasi, Ghana. We enrolled 2142 HIV-negative women at high risk of HIV infection, and randomized them to SAVVY or placebo gel. Main outcome measures were the incidence of HIV-1 and HIV-2 infection as determined by detection of HIV antibodies from oral mucosal transudate specimens and adverse events. We accrued 790 person-years of follow-up in the SAVVY group and 772 person-years in the placebo group. No clinically significant differences in the overall frequency of adverse events, abnormal pelvic examination findings, or abnormal laboratory results were seen between treatment groups. However, more participants in the SAVVY group reported reproductive tract adverse events than in the placebo group (13.0% versus 9.4%). Seventeen HIV seroconversions occurred; eight in participants randomized to SAVVY and nine in participants receiving placebo. The Kaplan-Meier estimates of the cumulative probability of HIV infection through 12 months were 0.010 in the SAVVY group and 0.011 in the placebo group (p = 0.731), with a hazard ratio (SAVVY versus placebo) of 0.88 (95% confidence interval 0.33, 2.27). Because of a lower-than-expected HIV incidence, we were unable to achieve the required number of HIV infections (66) to obtain the desired study power.SAVVY was not associated with increased adverse events overall, but was associated with higher reporting of reproductive adverse events. Our data are insufficient to conclude whether SAVVY is effective at preventing HIV infection relative to placebo.ClinicalTrials.gov NCT00129532

Efficient Organic Photovoltaics Utilizing Nanoscale Heterojunctions in Sequentially Deposited Polymer/fullerene Bilayer

A highly efficient sequentially deposited bilayer (SD-bilayer) of polymer/fullerene organic photovoltaic (OPV) device is developed via the solution process. Herein, we resolve two essential problems regarding the construction of an efficient SD-bilayer OPV. First, the solution process fabrication of the SD-bilayer is resolved by incorporating an ordering agent (OA) to the polymer solution, which improves the ordering of the polymer chain and prevents the bottom-layer from dissolving into the top-layer solution. Second, a non-planar heterojunction with a large surface area is formed by the incorporation of a heterojunction agent (HA) to the top-layer solution. Poly[[9-(1-octylnonyl)-9H-carbazole-2,7-diyl]-2,5-thiophenediyl-2,1,3-benzothiadiazole- 4,7-diyl-2,5-thiophenediyl] (PCDTBT) is used for the bottom-layer and phenyl-C71-butyric-acid-methyl ester (PC70BM) is used for the top-layer. The SD-bilayer OPV produced utilizing both an OA and HA exhibits a power conversion efficiency (PCE) of 7.12% with a high internal quantum efficiency (IQE). We believe our bilayer system affords a new way of forming OPVs distinct from bulk heterojunction (BHJ) systems and offers a chance to reconsider the polymers that have thus far shown unsatisfactory performance in BHJ systemsope

Optimization of an Electron Transport Layer to Enhance the Power Conversion Efficiency of Flexible Inverted Organic Solar Cells

The photovoltaic (PV) performance of flexible inverted organic solar cells (IOSCs) with an active layer consisting of a blend of poly(3-hexylthiophene) and [6, 6]-phenyl C61-butlyric acid methyl ester was investigated by varying the thicknesses of ZnO seed layers and introducing ZnO nanorods (NRs). A ZnO seed layer or ZnO NRs grown on the seed layer were used as an electron transport layer and pathway to optimize PV performance. ZnO seed layers were deposited using spin coating at 3,000 rpm for 30 s onto indium tin oxide (ITO)-coated polyethersulphone (PES) substrates. The ZnO NRs were grown using an aqueous solution method at a low temperature (90°C). The optimized device with ZnO NRs exhibited a threefold increase in PV performance compared with that of a device consisting of a ZnO seed layer without ZnO NRs. Flexible IOSCs fabricated using ZnO NRs with improved PV performance may pave the way for the development of PV devices with larger interface areas for effective exciton dissociation and continuous carrier transport paths

Involvement of (pro)renin receptor in the glomerular filtration barrier

(Pro)renin receptor-bound prorenin not only causes the generation of angiotensin II via the nonproteolytic activation of prorenin, it also activates the receptor’s own intracellular signaling pathways independent of the generated angiotensin II. Within the kidneys, the (pro)renin receptor is not only present in the glomerular mesangium, it is also abundant in podocytes, which play an important role in the maintenance of the glomerular filtration barrier. Recent in vivo studies have demonstrated that the overexpression of the (pro)renin receptor to a degree similar to that observed in hypertensive rat kidneys leads to slowly progressive nephropathy with proteinuria. In addition, the handle region peptide, which acts as a decoy peptide and competitively inhibits the binding of prorenin to the receptor, is more beneficial than an angiotensin-converting enzyme inhibitor with regard to alleviating proteinuria and glomerulosclerosis in experimental animal models of diabetes and essential hypertension. Thus, the (pro)renin receptor may be upregulated in podocytes under hypertensive conditions and may contribute to the breakdown of the glomerular filtration barrier

Graphene Photonics and Optoelectronics

The richness of optical and electronic properties of graphene attracts enormous interest. Graphene has high mobility and optical transparency, in addition to flexibility, robustness and environmental stability. So far, the main focus has been on fundamental physics and electronic devices. However, we believe its true potential to be in photonics and optoelectronics, where the combination of its unique optical and electronic properties can be fully exploited, even in the absence of a bandgap, and the linear dispersion of the Dirac electrons enables ultra-wide-band tunability. The rise of graphene in photonics and optoelectronics is shown by several recent results, ranging from solar cells and light emitting devices, to touch screens, photodetectors and ultrafast lasers. Here we review the state of the art in this emerging field.Comment: Review Nature Photonics, in pres