23 research outputs found
Do ceramic femoral heads reduce taper fretting corrosion in hip arthroplasty? A retrieval study.
BACKGROUND: Previous studies regarding modular head-neck taper corrosion were largely based on cobalt chrome (CoCr) alloy femoral heads. Less is known about head-neck taper corrosion with ceramic femoral heads.
QUESTIONS/PURPOSES: We asked (1) whether ceramic heads resulted in less taper corrosion than CoCr heads; (2) what device and patient factors influence taper fretting corrosion; and (3) whether the mechanism of taper fretting corrosion in ceramic heads differs from that in CoCr heads.
METHODS: One hundred femoral head-stem pairs were analyzed for evidence of fretting and corrosion using a visual scoring technique based on the severity and extent of fretting and corrosion damage observed at the taper. A matched cohort design was used in which 50 ceramic head-stem pairs were matched with 50 CoCr head-stem pairs based on implantation time, lateral offset, stem design, and flexural rigidity.
RESULTS: Fretting and corrosion scores were lower for the stems in the ceramic head cohort (p=0.03). Stem alloy (p=0.004) and lower stem flexural rigidity (Spearman\u27s rho=-0.32, p=0.02) predicted stem fretting and corrosion damage in the ceramic head cohort but not in the metal head cohort. The mechanism of mechanically assisted crevice corrosion was similar in both cohorts although in the case of ceramic femoral heads, only one of the two surfaces (the male metal taper) engaged in the oxide abrasion and repassivation process.
CONCLUSIONS: The results suggest that by using a ceramic femoral head, CoCr fretting and corrosion from the modular head-neck taper may be mitigated but not eliminated.
CLINICAL RELEVANCE: The findings of this study support further study of the role of ceramic heads in potentially reducing femoral taper corrosion
Lives saved with vaccination for 10 pathogens across 112 countries in a pre-COVID-19 world.
BackgroundVaccination is one of the most effective public health interventions. We investigate the impact of vaccination activities for Haemophilus influenzae type b, hepatitis B, human papillomavirus, Japanese encephalitis, measles, Neisseria meningitidis serogroup A, rotavirus, rubella, Streptococcus pneumoniae, and yellow fever over the years 2000-2030 across 112 countries.MethodsTwenty-one mathematical models estimated disease burden using standardised demographic and immunisation data. Impact was attributed to the year of vaccination through vaccine-activity-stratified impact ratios.ResultsWe estimate 97 (95%CrI[80, 120]) million deaths would be averted due to vaccination activities over 2000-2030, with 50 (95%CrI[41, 62]) million deaths averted by activities between 2000 and 2019. For children under-5 born between 2000 and 2030, we estimate 52 (95%CrI[41, 69]) million more deaths would occur over their lifetimes without vaccination against these diseases.ConclusionsThis study represents the largest assessment of vaccine impact before COVID-19-related disruptions and provides motivation for sustaining and improving global vaccination coverage in the future.FundingVIMC is jointly funded by Gavi, the Vaccine Alliance, and the Bill and Melinda Gates Foundation (BMGF) (BMGF grant number: OPP1157270 / INV-009125). Funding from Gavi is channelled via VIMC to the Consortium's modelling groups (VIMC-funded institutions represented in this paper: Imperial College London, London School of Hygiene and Tropical Medicine, Oxford University Clinical Research Unit, Public Health England, Johns Hopkins University, The Pennsylvania State University, Center for Disease Analysis Foundation, Kaiser Permanente Washington, University of Cambridge, University of Notre Dame, Harvard University, Conservatoire National des Arts et Métiers, Emory University, National University of Singapore). Funding from BMGF was used for salaries of the Consortium secretariat (authors represented here: TBH, MJ, XL, SE-L, JT, KW, NMF, KAMG); and channelled via VIMC for travel and subsistence costs of all Consortium members (all authors). We also acknowledge funding from the UK Medical Research Council and Department for International Development, which supported aspects of VIMC's work (MRC grant number: MR/R015600/1).JHH acknowledges funding from National Science Foundation Graduate Research Fellowship; Richard and Peggy Notebaert Premier Fellowship from the University of Notre Dame. BAL acknowledges funding from NIH/NIGMS (grant number R01 GM124280) and NIH/NIAID (grant number R01 AI112970). The Lives Saved Tool (LiST) receives funding support from the Bill and Melinda Gates Foundation.This paper was compiled by all coauthors, including two coauthors from Gavi. Other funders had no role in study design, data collection, data analysis, data interpretation, or writing of the report. All authors had full access to all the data in the study and had final responsibility for the decision to submit for publication
Incidence of Postthrombotic Syndrome in Patients Undergoing Primary Total Knee Arthroplasty for Osteoarthritis
Postthrombotic syndrome (PTS) is characterized by edema, venous ectasia, hyperpigmentation, varicose veins, venous ulceration, and pain with calf compression after deep venous thrombosis (DVT). We determined the incidence of PTS after DVT diagnosed on screening ultrasound in patients undergoing primary total knee arthroplasty (TKA) for osteoarthritis (OA). We retrospectively reviewed the records of 1406 patients who underwent primary TKA for osteoarthritis and compared the incidence of PTS in patients without and with DVT. All patients had postoperative screening ultrasound. From these 1406 patients we identified 66 (4.7%) who had DVT, 50 of whom had a minimum of 1 year followup (mean, 4.97 years; range, 1.00–7.53 years). PTS was diagnosed if any two of six signs were documented in the medical record. Three of 50 patients with DVT (6%) had signs consistent with PTS; two of these three had a DVT proximal to the soleal arch. Seven (8%) of 88 patients randomly chosen for primary TKA because of OA with similar mean age and gender, but without DVT, had signs of PTS. PTS does not seem to be a major sequela of DVT in patients undergoing primary TKA for OA
Incidence of Postthrombotic Syndrome in Patients Undergoing Primary Total Hip Arthroplasty for Osteoarthritis
Revision Total Knee Arthroplasty for Aseptic and Septic Causes in Patients with Rheumatoid Arthritis
Revision total knee arthroplasty in patients with rheumatoid arthritis can be challenging. We asked whether we could confirm previously reported high failure rates following revision total knee arthroplasty in patients with rheumatoid arthritis. We therefore determined the Knee Society knee score and function scores, radiographic evidence of failure, and overall survival of the revision procedure in these patients. We retrospectively reviewed 39 patients with rheumatoid arthritis who underwent 45 TKA revisions from 1994 to 2006. Twenty-seven of the 45 TKA revisions were for mechanical failure of the prosthetic components and 18 for infection. Five of the 27 knees (19%) revised for mechanical failure subsequently failed a second time. Five of the 18 patients who underwent revision for infection died within 6 months and three of the remaining knees failed secondary to reinfection. Excluding the knees that failed, the average Knee Society knee score and function score improved in both subgroups. Two knees had radiographic evidence of nonprogressive tibial radiolucencies. The probability of survival for all knees (revision as the end point) was 76% ± 9% at 5 years. We confirmed the previously reported high mortality and subsequent failure rates following revision total knee arthroplasty for both mechanical issues and infection in patients with rheumatoid arthritis and emphasize the potential difficulties in treating these patients
Crack Initiation in Retrieved Cross-Linked Highly Cross-Linked Ultrahigh-Molecular-Weight Polyethylene Acetabular Liners
Recommended from our members
Unexpected Wear of a Uniquely Designed Moderately Cross-Linked Polyethylene in Total Hip Arthroplasty
A uniquely designed, non–heat-treated moderately cross-linked acetabular polyethylene liner used in total hip arthroplasty (THA) demonstrated excessive wear during routine follow-up, prompting an evaluation of the linear wear rate.
All THAs were performed by the senior author. The study group included 38 THAs using the uniquely designed polyethylene in question, compared to a control group of 21 THAs using another moderately cross-linked polyethylene with good 10-year outcomes. Two-dimensional linear head penetration wear measurements were obtained using the Martell Hip Analysis Suite, and retrieval analysis was performed on two liners.
The study group had a significantly higher average penetration rate of 0.089 mm/y than the control group average rate of 0.047 mm/y (P = .04). Forty-five percent of the study group had a wear rate above the osteolysis threshold (0.1 mm/y), compared to 24% in the control group. Macroscopic analysis of two retrieved liners validated the radiographic findings.
The data suggest unexpectedly higher wear rates for a moderately cross-linked polyethylene design, with nearly half of the study group at risk for osteolysis. Further registry or database analyses of this particular moderately cross-linked polyethylene are warranted
Gamma Inert Sterilization: A Solution to Polyethylene Oxidation?
Background: In the 1990s, oxidation was found to occur in ultra-high molecular weight polyethylene total joint replacement components following gamma irradiation and prolonged shelf aging in air. Orthopaedic manufacturers developed barrier packaging to reduce oxidation during and after radiation sterilization. The present study explores the hypothesis that polyethylene components sterilized in a low-oxygen environment undergo similar in vivo oxidative mechanisms as inserts sterilized in air. In addition, the potential influence of the different sterilization processes on the wear performance of the polyethylene components was examined
Isolated All-polyethylene Patellar Revisions for Metal-backed Patellar Failure
The outcome of isolated patellar component revisions after metal-backed patellar failure is variable with satisfactory results reported from 78% to 100%. To supplement information in the literature we determined the failure rate and the functional outcome based on the Knee Society clinical and roentgenographic evaluation systems of isolated patellar component revisions after metal-backed patellar component failure. We retrospectively reviewed 27 patients with 28 isolated patellar component revisions for metal-backed patellar component failure performed between 1988 and 2005. Twenty-five knees in 24 patients were available for review with a minimum followup of 24 months (mean, 90 months; range, 24–210 months). All knees were revised with a cemented all-polyethylene patellar component and all tibial polyethylene components were routinely exchanged. One failure (4%) occurred 122.6 months after the isolated patellar component revision secondary to femoral and tibial component loosening. The average Knee Society knee score improved from 73 to 89 points, whereas the average Knee Society function score improved from 56 to 65. Our data confirm those in the literature suggesting a successful outcome can be achieved with an isolated patellar component revision for metal-backed patellar component failure