Hydrogen sensing properties of Pt/lanthanum oxide-molybdenum oxide nanoplatelet/SiC based Schottky diode

An investigation of the electrical and hydrogen sensing properties of a novel Schottky diode based on a nanostructured lanthanum oxide-molybdenum oxide compound is presented herein. Molybdenum oxide (MoO3) nanoplatelets were grown on SiC substrates via thermal evaporation which was then subsequently coated with lanthanum oxide (La2O3) by RF sputtering. The current-voltage characteristics and hydrogen sensing performance (change in barrier height and sensitivity as well as the dynamic response) were examined from 25 to 300°C. At 180°C, a voltage shift of 2.23V was measured from the sensor while exposed to 1% hydrogen gas under a 100 μA constant reverse bias current. The results indicate that the presence of a La2O3 thin layer substantially improves the hydrogen sensitivity of the MoO3 nanoplatelets

Structural and gas-sensing properties of CuO–CuxFe3−xO4 nanostructured thin films

Nanocrystalline CuO–CuxFe3−xO4 thin films were developed using a radio-frequency sputtering method followed by a thermal oxidation process. Thin films were deposited applying two very different conditions by varying the argon pressure and the target-to-substrate distance. Structural, microstructural and gas-sensing characteristics were performed using grazing incidence X-ray diffraction (GXRD), Raman spectroscopy, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), scanning electron microscopy (SEM), and electrical measurements. Their sensing properties were examined using hydrogen gas in dry synthetic air. The shortest response and recovery times were observed between 280 and 300 °C independently of the deposition conditions

a perspective on materials, synthesis methods and applications

The oxides of copper (CuxO) are fascinating materials due to their remarkable optical, electrical, thermal and magnetic properties. Nanostructuring of CuxO can further enhance the performance of this important functional material and provide it with unique properties that do not exist in its bulk form. Three distinctly different phases of CuxO, mainly CuO, Cu2O and Cu4O3, can be prepared by numerous synthesis techniques including, vapour deposition and liquid phase chemical methods. In this article, we present a review of nanostructured CuxO focusing on their material properties, methods of synthesis and an overview of various applications that have been associated with nanostructured CuxO

Size based separation of microparticles using a dielectrophoretic activated system

This work describes the separation of polystyrene microparticles suspended in deionized (DI) water according to their dimensions using a dielectrophoretic (DEP) system. The DEP system utilizes curved microelectrodes integrated into a microfluidic system. Microparticles of 1, 6, and 15 μm are applied to the system and their response to the DEP field is studied at different frequencies of 100, 200, and 20 MHz. The microelectrodes act as a DEP barrier for 15 μm particles and retain them at all frequencies whereas the response of 1 and 6 μm particles depend strongly on the applied frequency. At 100 kHz, both particles are trapped by the microelectrodes. However, at 200 kHz, the 1 μm particles are trapped by the microelectrodes while the 6 μm particles are pushed toward the sidewalls. Finally, at 20 MHz, both particles are pushed toward the sidewalls. The experiments show the tunable performance of the system to sort the microparticles of various dimensions in microfluidic systems

Polyaniline nanofiber based surface acoustic wave gas sensors – effect of nanofiber diameter on H2 response

Kourosh and Kaner, Richard B. 2007, Polyaniline nanofiber based surface acoustic wave gas sensors – effect of nanofiber diameter on H2 response, IEEE sensors journal, vol. 7, no. 2, pp. 213-218. Available from Deakin Research Online

H2 sensing performance of optical fiber coated with nano-platelet WO3 film

For the first time, we have integrated nano-platelet Pd/WO3 films, which are formed using an acid etching method, with optical fibers to develop a hydrogen gas (H2) sensors. The tungsten films were firstly RF sputtered on top of optical fiber tips, and subsequently etched in 1.5 M nitric acid to produce tungstite films. After annealing at 300 and 480 °C, these films were coated with approximately 25 Å thick Pd layers. The films were characterized using SEM, GADDS, EDX, and both Raman and UV–vis–NIR spectroscopy. H2 testing measurements were conducted when the sensors were interacting with 0.06–1% H2 in synthetic air at an optimum temperature of 100 °C. It was found that the highly crystalline nano-platelet Pd/WO3 film based optical fiber H2 sensors show large reflectance responses in the NIR wavelength of 6% and 12% in the presence of 0.06% and 1% H2, respectively

Dielectrophoresis of micro/nano particles using curved microelectrodes

Dielectrophoresis, the induced motion of polarisable particles in non-homogenous electric field, has been proven as a versatile mechanism to transport, immobilise, sort and characterise micro/nano scale particle in microfluidic platforms. The performance of dielectrophoretic (DEP) systems depend on two parameters: the configuration of microelectrodes designed to produce the DEP force and the operating strategies devised to employ this force in such processes. This work summarises the unique features of curved microelectrodes for the DEP manipulation of target particles in microfluidic systems. The curved microelectrodes demonstrate exceptional capabilities including (i) creating strong electric fields over a large portion of their structure, (ii) minimising electro-thermal vortices and undesired disturbances at their tips, (iii) covering the entire width of the microchannel influencing all passing particles, and (iv) providing a large trapping area at their entrance region, as evidenced by extensive numerical and experimental analyses. These microelectrodes have been successfully applied for a variety of engineering and biomedical applications including (i) sorting and trapping model polystyrene particles based on their dimensions, (ii) patterning carbon nanotubes to trap low-conductive particles, (iii) sorting live and dead cells based on their dielectric properties, (iv) real-time analysis of drug-induced cell death, and (v) interfacing tumour cells with environmental scanning electron microscopy to study their morphological properties. The DEP systems based on curved microelectrodes have a great potential to be integrated with the future lab-on-a-chip systems.<br /

Impact of Minor Alloy Components on the Electrocapillarity and Electrochemistry of Liquid Metal Fractals

Exploring and controlling surface tension‐driven phenomena in liquid metals may lead to unprecedented possibilities for next‐generation microfluidics, electronics, catalysis, and materials synthesis. In pursuit of these goals, the impact of minor constituents within liquid alloys is largely overlooked. Herein, it is showed that the presence of a fraction of solute metals such as tin, bismuth, and zinc in liquid gallium can significantly influence their electrocapillarity and electrochemistry. The instability‐driven fractal formation of liquid alloy droplets is investigated with different solutes and reveals the formation of distinctive non‐branched droplets, unstable fractals, and stable fractal modes under controlled voltage and alkaline solution conditions. In their individually unique fractal morphology diagrams, different liquid alloys demonstrate significantly shifted voltage thresholds in transition between the three fractal modes, depending on the choice of the solute metal. Surface tension measurements, cycle voltammetry and surface compositional characterizations provide strong evidence that the minor alloy components drastically alter the surface tension, surface electrochemical oxidation, and oxide dissolution processes that govern the droplet deformation and instability dynamics. The findings that minor components are able to regulate liquid alloys’ surface tensions, surface element distributions and electrochemical activities offer great promises for harnessing the tunability and functionality of liquid metals