Molecular Breeding of Advanced Microorganisms for Biofuel Production

Large amounts of fossil fuels are consumed every day in spite of increasing environmental problems. To preserve the environment and construct a sustainable society, the use of biofuels derived from different kinds of biomass is being practiced worldwide. Although bioethanol has been largely produced, it commonly requires food crops such as corn and sugar cane as substrates. To develop a sustainable energy supply, cellulosic biomass should be used for bioethanol production instead of grain biomass. For this purpose, cell surface engineering technology is a very promising method. In biobutanol and biodiesel production, engineered host fermentation has attracted much attention; however, this method has many limitations such as low productivity and low solvent tolerance of microorganisms. Despite these problems, biofuels such as bioethanol, biobutanol, and biodiesel are potential energy sources that can help establish a sustainable society

Rapid preparation of mutated influenza hemagglutinins for influenza virus pandemic prevention

Influenza viruses have periodically caused pandemic due to frequent mutation of viral proteins. Influenza viruses have two major membrane glycoproteins: hemagglutinin (HA) and neuraminidase (NA). Hemagglutinin plays a crucial role in viral entry, while NA is involved in the process of a viral escape. In terms of developing antiviral drugs, HA is a more important target than NA in the prevention of pandemic, since HA is likely to change the host specificity of a virus by acquiring mutations, thereby to increase the risk of pandemic. To characterize mutated HA functions, current approaches require immobilization of purified HA on plastic wells and carriers. These troublesome methods make it difficult to respond to emerging mutations. In order to address this problem, a yeast cell surface engineering approach was investigated. Using this technology, human HAs derived from various H1N1 subtypes were successfully and rapidly displayed on the yeast cell surface. The yeast-displayed HAs exhibited similar abilities to native influenza virus HAs. Using this system, human HAs with 190E and 225G mutations were shown to exhibit altered recognition specificities from human to avian erythrocytes. This system furthermore allowed direct measurement of HA binding abilities without protein purification and immobilization. Coupled with the ease of genetic manipulation, this system allows the simple and comprehensive construction of mutant protein libraries on yeast cell surface, thereby contributing to influenza virus pandemic prevention

Elucidation of the recognition mechanisms for hemicellulose and pectin in Clostridium cellulovorans using intracellular quantitative proteome analysis

Clostridium cellulovorans is an anaerobic, cellulolytic bacterium, capable of effectively degrading and metabolizing various types of substrates, including cellulose, hemicellulose (xylan and galactomannan), and pectin. Among Clostridia, this ability to degrade and metabolize a wide range of hemicellulose and pectin substrates is a unique feature; however, the mechanisms are currently unknown. To clarify the mechanisms of hemicelluloses and pectin recognition and metabolism, we carried out a quantitative proteome analysis of C. cellulovorans cultured with these substrates. C. cellulovorans was cultured in the medium of glucose (control), xylan, galactomannan (Locus bean gum, LBG), or pectin for 36 h. Xylan and galactomannan were used to search for the common recognition mechanisms of hemicellulose, and pectin was used to search for unique recognition systems in C. cellulovorans. Using an isobaric tag method and liquid chromatograph/mass spectrometer equipped with a long monolithic silica capillary column, we identified 734 intracellular proteins from all substrates. We performed KEGG analyses and cluster analyses of the resulting proteins. In the KEGG analyses, we found common degradation mechanisms for hemicellulose and pectin. In the cluster analysis corresponding to the genome analysis, we detected substrate-specific clusters that include genes involved in substrate recognition, substrate degradation, and metabolism. Combining the results of the KEGG analyses and cluster analyses, we propose the mechanisms involved in the recognition and metabolism of hemicellulose and pectin in C. cellulovorans

Reverse loading tests of steel tube under biaxial stress states

Biaxial loading and reverse loading tests were performed using seamless carbon steel tubes. Biaxial stress components in the axial and circumferential directions were applied to the tubular specimens using a servo-controlled multiaxial tube expansion testing machine developed by Kuwabara and Sugawara (2013). The tubular specimens were loaded under linear tensile stress paths. Contours of plastic work were measured in the principal stress space, and the differential hardening (DH) behavior was observed; the shapes of the contours of plastic work changed with an increase in plastic work. In addition, small uniaxial tensile specimens were fabricated from the mother tube wall in axial and hoop directions, and tension–compression reverse loading tests were performed to quantitatively evaluate the Bauschinger effect of the test material. Moreover, bilinear stress path experiments were performed to investigate the effects of axial prestraining on the change in the Bauschinger effect; compressive preloading in the axial direction (first loading) was followed by the application of linear stress paths in the first quadrant of the principal stress space (second loading). The measured Bauschinger effect in the second loading was different from those measured in the uniaxial reverse loading tests for the as-received material. The material model will be utilized to improve the accuracy in the numerical analyses of the cold working processes for fabricating steel tubes

Effect of initial thickness deviation and reduction on longitudinal and cross-sectional precision after tube drawing using plug

In this research, 2D and 3D FEM models are composed for the clarification of the effect of initial thickness distribution on its distribution after drawing and the residual stresses. In the 2D FEM, the minimum bare element numberwas determined in terms on both residual stress precision and calculation time. Based on the results of 2D FEM, the element numberin3D FEM wasdetermined. Using the obtained 3D FEM, the effect of initial thickness distribution was clarified with the combination of thicknessreduction. It was revealed that light reduction in thickness in plug drawing sometimes lead to increase of thickness deviation, against intuitiveprediction based on tube drawing without plug.On the other hand, increase of thickness reduction resulted in decrease of thickness deviation. The mechanism of thickness change was also examined

Improvement in organophosphorus hydrolase activity of cell surface-engineered yeast strain using Flo1p anchor system

Organophosphorus hydrolase (OPH) hydrolyzes organophosphorus esters. We constructed the yeast-displayed OPH using Flo1p anchor system. In this system, the N-terminal region of the protein was fused to Flo1p and the fusion protein was displayed on the cell surface. Hydrolytic reactions with paraoxon were carried out during 24 h of incubation of OPH-displaying cells at 30°C. p-Nitrophenol produced in the reaction mixture was detected by HPLC. The strain with highest activity showed 8-fold greater OPH activity compared with cells engineered using glycosylphosphatidylinositol anchor system, and showed 20-fold greater activity than Escherichia coli using the ice nucleation protein anchor system. These results indicate that Flo1p anchor system is suitable for display of OPH in the cell surface-expression systems

Results of the search for inspiraling compact star binaries from TAMA300's observation in 2000-2004

We analyze the data of TAMA300 detector to search for gravitational waves from inspiraling compact star binaries with masses of the component stars in the range 1-3Msolar. In this analysis, 2705 hours of data, taken during the years 2000-2004, are used for the event search. We combine the results of different observation runs, and obtained a single upper limit on the rate of the coalescence of compact binaries in our Galaxy of 20 per year at a 90% confidence level. In this upper limit, the effect of various systematic errors such like the uncertainty of the background estimation and the calibration of the detector's sensitivity are included.Comment: 8 pages, 4 Postscript figures, uses revtex4.sty The author list was correcte

Observation results by the TAMA300 detector on gravitational wave bursts from stellar-core collapses

We present data-analysis schemes and results of observations with the TAMA300 gravitational-wave detector, targeting burst signals from stellar-core collapse events. In analyses for burst gravitational waves, the detection and fake-reduction schemes are different from well-investigated ones for a chirp-wave analysis, because precise waveform templates are not available. We used an excess-power filter for the extraction of gravitational-wave candidates, and developed two methods for the reduction of fake events caused by non-stationary noises of the detector. These analysis schemes were applied to real data from the TAMA300 interferometric gravitational wave detector. As a result, fake events were reduced by a factor of about 1000 in the best cases. The resultant event candidates were interpreted from an astronomical viewpoint. We set an upper limit of 2.2x10^3 events/sec on the burst gravitational-wave event rate in our Galaxy with a confidence level of 90%. This work sets a milestone and prospects on the search for burst gravitational waves, by establishing an analysis scheme for the observation data from an interferometric gravitational wave detector

Candida albicans Possesses Sap7 as a Pepstatin A-Insensitive Secreted Aspartic Protease

BACKGROUND: Candida albicans, a commensal organism, is a part of the normal flora of healthy individuals. However, once the host immunity is compromised, C. albicans opportunistically causes recurrent superficial or fatal systemic candidiasis. Secreted aspartic proteases (Sap), encoded by 10 types of SAP genes, have been suggested to contribute to various virulence processes. Thus, it is important to elucidate their biochemical properties for better understanding of the molecular mechanisms that how Sap isozymes damage host tissues. METHODOLOGY/PRINCIPAL FINDINGS: The SAP7 gene was cloned from C. albicans SC5314 and heterogeneously produced by Pichia pastoris. Measurement of Sap7 proteolytic activity using the FRETS-25Ala library showed that Sap7 was a pepstatin A-insensitive protease. To understand why Sap7 was insensitive to pepstatin A, alanine substitution mutants of Sap7 were constructed. We found that M242A and T467A mutants had normal proteolytic activity and sensitivity to pepstatin A. M242 and T467 were located in close proximity to the entrance to an active site, and alanine substitution at these positions widened the entrance. Our results suggest that this alteration might allow increased accessibility of pepstatin A to the active site. This inference was supported by the observation that the T467A mutant has stronger proteolytic activity than the wild type. CONCLUSIONS/SIGNIFICANCE: We found that Sap7 was a pepstatin A-insensitive protease, and that M242 and T467 restricted the accessibility of pepstatin A to the active site. This finding will lead to the development of a novel protease inhibitor beyond pepstatin A. Such a novel inhibitor will be an important research tool as well as pharmaceutical agent for patients suffering from candidiasis