Fabrication of Sensitive Fibre-Optic Gas Sensors Based on Nano-Assembled Thin Films

Non

Interrogation of fibre Bragg gratings through a fibre optic rotary joint on a geotechnical centrifuge

The monitoring of an array of fibre Bragg gratings (FBGs) strain sensors was performed through a single channel, single mode fibre optic rotary joint (FORJ) mounted on a geotechnical centrifuge. The array of three FBGs was attached to an aluminum plate that was anchored at the ends and placed on the model platform of the centrifuge. Acceleration forces of up to 50g were applied and the reflection signal of the monitored FBGs recorded dynamically using a 2.5kHz FBG interrogator placed outside the centrifuge. The use of a FORJ allowed the monitoring of the FBGs without submitting the FBG interrogator to the high g-forces experienced in the centrifuge. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only

Long Period Grating Based Fibre Optic Chemical Sensors

The principle of operation of optical fibre long period grating (LPG) sensors is described. In particular, the chapter explores the use of LPGs as a chemical sensing platform, discussing the fabrication of LPGs and the various approaches that have been employed to modify the cladding of the LPG and thus sensitise the LPG. Examples of the practical application of LPG chemical sensors are provided

Ammonia sensing using lossy mode resonances in a tapered optical fibre coated with porphyrin-incorporated titanium dioxide

The development of an ammonia sensor, formed by the deposition of a functionalised titanium dioxide film onto a tapered optical fibre is presented. The titanium dioxide coating allows the coupling of light from the fundamental core mode to a lossy mode supported by the coating, thus creating lossy mode resonance (LMR) in the transmission spectrum. The porphyrin compound that was used to functionalise the coating was removed from the titanium dioxide coating upon exposure to ammonia, causing a change in the refractive index of the coating and a concomitant shift in the central wavelength of the lossy mode resonance. Concentrations of ammonia as small as 1ppm was detected with a response time of less than 1min. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only

A long period grating optical fiber sensor with nano-assembled porphyrin layers for detecting ammonia gas

In this study, the ability of a long period grating (LPG) optical fiber sensor coated with a multilayer film of poly(diallyldimethyammonium chloride) (PDDA) and tetrakis(4-sulfophenyl)porphine (TSPP) to detect ammonia gas was demonstrated. The nano-assembled thin film was prepared using a layer-by-layer deposition technique. This combination of an LPG and TSPP could allow highly sensitive optical sensors that specifically bind ammonia to be fabricated. An LPG with a period of 100 μm and a PDDA/TSPP coating produced by depositing fifteen layers afforded a limit of detection of 0.67 ppm for ammonia gas. TSPP molecules in the film acted as ammonia receptors because the TSPP morphologically changed from J- or H-aggregates to free base monomers when it was deprotonated by being exposed to ammonia. Interestingly, HCl vapor could be used to increase the relative amount of J-aggregation in the TSPP and to restore the sensor response. The reversibility of the morphological change in the TSPP allowed reversible changes to occur in the properties of the coating, including the refractive index, film thickness and density, and electrostatic interactions; these influenced the transmission spectrum of the LPG

An ammonia sensor based on Lossy Mode Resonances on a tapered optical fibre coated with porphyrin-incorporated titanium dioxide

The development of a highly sensitive ammonia sensor is described. The sensor is formed by deposition of a nanoscale coating of titanium dioxide, containing a porphyrin as a functional material, onto a tapered optical fibre. The titanium dioxide coating allows coupling of light from the fundamental core mode to a lossy mode supported by the coating, thus creating a Lossy Mode Resonance (LMR) in the transmission spectrum. A change in the refractive index of the coating caused by the interaction of the porphyrin with ammonia causes a change in the centre wavelength of the LMR, allowing concentrations of ammonia in water as low as 0.1 ppm to be detected, with a response time of less than 30 s

Tapered optical fibre sensors: current trends and future perspectives

The development of reliable, affordable and efficient sensors is a key step in providing tools for efficient monitoring of critical environmental parameters. This review focuses on the use of tapered optical fibres as an environmental sensing platform. Tapered fibres allow access to the evanescent wave of the propagating mode, which can be exploited to facilitate chemical sensing by spectroscopic evaluation of the medium surrounding the optical fibre, by measurement of the refractive index of the medium, or by coupling to other waveguides formed of chemically sensitive materials. In addition, the reduced diameter of the tapered section of the optical fibre can offer benefits when measuring physical parameters such as strain and temperature. A review of the basic sensing platforms implemented using tapered optical fibres and their application for development of fibre-optic physical, chemical and bio-sensors is presented

Carbon dioxide measurements using long period grating optical fibre sensor coated with metal organic framework HKUST-1

An optical fibre long period grating (LPG) based carbon dioxide (CO2) sensor coated with HKUST-1, a material from the metal organic framework family, functional coating is presented. In-situ crystallization and layer by layer (LbL) techniques of HKUST-1 thin film synthesis are compared in terms of the feasibility of the deposition procedure (time and cost efficiency) and the sensitivity of the film to carbon dioxide. The sensing mechanism is based on the measurement of the change of the refractive index (RI) of the coating that is induced by the penetration of CO2 molecules into the HKUST-1 pores. The HKUST-1 film was characterized by scanning electron microscopy (SEM). The thickness and refractive index (RI) of the 10, 20 and 40 layers thick films were determined using ellipsoetry. The crystallinity of the films was examined by X-ray diffraction pattern (XRD). While no response to CO2 was observed for the sensor coated using the in-situ crystallization technique, an LPG modified with 10, 20 and 40 layers of HKUST-1 films using LbL method upon exposure to CO2 in the range of 500 ppm to 40,000 ppm showed good sensitivity. The film containing 40 layers exhibited the highest sensitivity to CO2 with an obtained detection limit of 401 ppm