Synthesis and antibacterial effects of cobalt–cellulose magnetic nanocomposites

© The Royal Society of Chemistry. Green synthesis is employed to prepare cobalt/cellulose nanocomposites with cubic (α-cobalt) cobalt as a main component with antibacterial and magnetic properties. An in situ reduction of aqueous solutions of cobalt ions on a model cellulose substrate surface using hydrogen gas affords spherical, cellulose-stabilised cobalt nanoclusters with magnetic properties and an average diameter of 7 nm that are distributed evenly over the surface of the cellulose fibres. These cobalt/cellulose nanocomposites exhibit good antibacterial action against opportunistic pathogens both Gram-positive (S. aureus) and Gram-negative (E. coli, A. baumannii and P. aeruginosa), with zones of inhibition up to 15 mm, thereby encouraging the deployment of these advanced materials for the treatment of wastewater or within medical dressings. This method of preparation is compared with the analogous in situ reduction of cobalt ions on a cellulose surface using sodium borohydride as reducing agent

Whiter, brighter, and more stable cellulose paper coated with antibacterial carboxymethyl starch stabilized ZnO nanoparticles

Small, carboxymethyl-starch-stabilised zinc oxide nanoparticles with a defined shape, size and morphology were prepared in situ in water at relatively low reaction temperatures using soluble carboxymethyl starch (CMS) as a combined crystallising, stabilising and solubilising agent and triethanolamine as the reducing agent. Aqueous colloidal solutions of these CMS-stabilised ZnO nanoparticles were used to deposit a coating of ZnO nanoparticles on cellulose paper by a wet-chemistry, polyelectrolyte, layer-by-layer approach using water as the only solvent. Such cellulose paper samples, coated with these CMS-stabilised ZnO nanoparticles, show higher brightness and whiteness than that of blank reference paper and are more stable to UV-radiation than the paper reference as well as demonstrating good antibacterial activity against MRSA and A. baumannii

Aqueous Solvation Dynamics at Metal Oxide Surfaces

Broadband transient absorption (TA) spectroscopy, three-pulse photon echo peak shift (3PEPS), and anisotropy decay measurements were used to study the solvation dynamics in bulk water and interfacial water at ZrO2 surfaces, using Eosin Y as a probe. The 3PEPS results show a multiexponential behavior with two subpicosecond components that are similar in bulk and interfacial water, while a third component of several picoseconds is significantly lengthened at the interface. The bandwidth correlation function from TA spectra exhibits the same behavior, and the TA spectra are well reproduced using the doorway-window picture with the time constants from PEPS. Our results suggest that interfacial water is restricted to a thickness of less than 5 angstrom. Also the high-frequency collective dynamics of water does not seem to be affected by the interface. On the other hand, the increase of the third component may point to a slowing down of diffusional motion at the interface, although other effects, may play a role, which are discussed

UV-stable paper coated with APTES-modified P25 TiO2 nanoparticles

In order to inhibit the photocatalytic degradation of organic material supports induced by small titania (TiO2) nanoparticles, highly photocatalytically active, commercially available P25-TiO2 nanoparticles were first modified with a thin layer of (3-aminopropyl) triethoxysilane (APTES), which were then deposited and fixed onto the surface of paper samples via a simple, dip-coating process in water at room temperature. The resultant APTES-modified P25 TiO2 nanoparticle-coated paper samples exhibit much greater stability to UV-illumination than uncoated blank reference paper. Very little, or no, photo-degradation in terms of brightness and whiteness, respectively, of the P25-TiO2-nanoparticle-treated paper is observed. There are many other potential applications for this Green Chemistry approach to protect cellulosic fibres from UV-bleaching in sunlight and to protect their whiteness and maintain their brightness

Modelling of aqueous solvation of eosin Y at the rutile TiO2(110)/water interface

Mol. dynamics simulations at 298 K are used to study an aq. dissolved dye (eosin Y) adsorbed at the TiO2(1 1 0) surface to ext. static and dynamic information of solvation. Differences in the phys. behavior of the dye at the surface and in bulk H2O are compared with recent transient absorption and photon echo expts. within the limits of linear response. The calcd. solvent dynamics features fast contributions, which change very little at the surface as well as a slow component, which slows down by a factor of 2 at the interface, in good agreement with exptl. data. [on SciFinder (R)

Whiter, brighter, and more stable cellulose paper coated with TiO 2/SiO2 core/shell nanoparticles using a layer-by-layer approach

To inhibit the photocatalytic degradation of organic material supports induced by small titania (TiO2) nanoparticles, four kinds of TiO2 nanoparticles, that is, commercial P25-TiO2, commercial rutile phase TiO2, rutile TiO2 nanorods and rutile TiO2 spheres, prepared from TiCl4, were coated with a thin, but dense, coating of silica (SiO2) using a conventional sol-gel technique to form TiO2/SiO2 core/shell nanoparticles. These core/shell particles were deposited and fixed as a very thin coating onto the surface of cellulose paper samples by a wet-chemistry polyelectrolyte layer-by-layer approach. The TiO2/SiO2 nanocoated paper samples exhibit higher whiteness and brightness and greater stability to UV-bleaching than comparable samples of blank paper. There are many potential applications for this green chemistry approach to protect cellulosic fibres from UV-bleaching in sunlight and to improve their whiteness and brightness