Near-Wall Flow in Turbomachinery Cascades—Results of a German Collaborative Project

This article provides a summarizing account of the results obtained in the current collabora-tive work of four research institutes concerning near-wall flow in turbomachinery. Specific questions regarding the influences of boundary layer development on blades and endwalls as well as loss mech-anisms due to secondary flow are investigated. These address skewness, periodical distortion, wake interaction and heat transfer, among others. Several test rigs with modifiable configurations are used for the experimental investigations including an axial low speed compressor, an axial high-speed wind tunnel, and an axial low-speed turbine. Approved stationary and time resolving measurements techniques are applied in combination with custom hot-film sensor-arrays. The experiments are complemented by URANS simulations, and one group focusses on turbulence-resolving simulations to elucidate the specific impact of rotation. Juxtaposing and interlacing their results the four groups provide a broad picture of the underlying phenomena, ranging from compressors to turbines, from isothermal to non-adiabatic, and from incompressible to compressible flows.The investigations reported in this article were conducted within the framework of the joint research project “Near-Wall Flow in Turbomachinery Cascades” which was funded and supported by the Deutsche Forschungsgemeinschaft (DFG) under grant number PAK 948. The responsibility for the contents of this publication lies entirely by the authors.Peer ReviewedPostprint (published version

The ReCoDe addiction research consortium:Losing and regaining control over drug intake-Findings and future perspectives

Substance use disorders (SUDs) are seen as a continuum ranging from goal-directed and hedonic drug use to loss of control over drug intake with aversive consequences for mental and physical health and social functioning. The main goals of our interdisciplinary German collaborative research centre on Losing and Regaining Control over Drug Intake (ReCoDe) are (i) to study triggers (drug cues, stressors, drug priming) and modifying factors (age, gender, physical activity, cognitive functions, childhood adversity, social factors, such as loneliness and social contact/interaction) that longitudinally modulate the trajectories of losing and regaining control over drug consumption under real-life conditions. (ii) To study underlying behavioural, cognitive and neurobiological mechanisms of disease trajectories and drug-related behaviours and (iii) to provide non-invasive mechanism-based interventions. These goals are achieved by: (A) using innovative mHealth (mobile health) tools to longitudinally monitor the effects of triggers and modifying factors on drug consumption patterns in real life in a cohort of 900 patients with alcohol use disorder. This approach will be complemented by animal models of addiction with 24/7 automated behavioural monitoring across an entire disease trajectory; i.e. from a naïve state to a drug-taking state to an addiction or resilience-like state. (B) The identification and, if applicable, computational modelling of key molecular, neurobiological and psychological mechanisms (e.g., reduced cognitive flexibility) mediating the effects of such triggers and modifying factors on disease trajectories. (C) Developing and testing non-invasive interventions (e.g., Just-In-Time-Adaptive-Interventions (JITAIs), various non-invasive brain stimulations (NIBS), individualized physical activity) that specifically target the underlying mechanisms for regaining control over drug intake. Here, we will report on the most important results of the first funding period and outline our future research strategy.</p

Rotating Instabilities in a Low-Speed Single Compressor Rotor Row with Varying Blade Tip Clearance

When a compressor is throttled to the near stall point, rotating instability (RI) is often observed as significant increases of amplitude within a narrow frequency band which can be regarded as a pre-stall disturbance. In the current study, a single compressor rotor row with varying blade tip clearance (1.3%, 2.6% and 4.3% chord length) was numerically simulated using the zonal large eddy simulation model. The mesh with six blade passages was selected to capture the proper dynamic feature after being validated in comparison to the measured data, and the dynamic mode decomposition (DMD) approach was applied to the numerical temporal snapshots. In the experimental results, RIs are detected in the configurations with middle and large tip gaps (2.6% and 4.3% chord length), and the corresponding characterized frequencies are about 1/2 and 1/3 of the blade passing frequency, respectively. Simulations provide remarkable performance in capturing the measured flow features, and the DMD modes corresponding to the featured RI frequencies are successfully extracted and then visualized. The analysis of DMD results indicates that RI is essentially a presentation of the pressure wave propagating over the blade tip region. The tip leakage vortex stretches to the front part of the adjacent blade and consequently triggers the flow perturbations (waves). The wave influences the pressure distribution, which, in turn, determines the tip leakage flow and finally forms a loop

Effects of Rotation on the Flow Structure in a Compressor Cascade

In turbomachines, rotors and stators differ by the rotation of the former. Hence, half of each stage is directly influenced by rotation effects. The influence of rotation on the flow structure and its impact on the performance is studied through Wall-Resolving Large Eddy Simulations of a rotor with large relative tip gap size. The simulations are performed in a rotating frame with rotation accounted for through a Coriolis force term. In a first step experimental results are used to provide validation. The main part of the study is the comparison of the results from two simulations, one representing the rotating configuration, one with the Coriolis force removed, without any other change. This setup allows very clean assessment of the influence of rotation. The turbulenceresolving approach ensures that the turbulent flow features are well represented. The results show a significant impact of rotation on the secondary flow. In the tip region the Tip Leakage Vortex is enlarged and destabilised. Inside the tip gap the flow is altered as well, with uniformization in the rotating case. At the blade midspan, no significant effects are observed on the suction side, while an earlier transition to turbulence is found on the pressure side. Near the hub, rotation effects are shown to reduce the corner separation significantly.Funding was provided by the Deutsche Forschungsgemeinschaft (DFG), under FR1593/15-1 and MA4922/8-1 within PAK948. The authors would like to acknowledge stimulating discussions with the partners of this project. Computations were performed at the Centre for Information Services and High Performance Computing (ZIH) at TU Dresden.Postprint (published version

Effects of Rotation on the Flow Structure in a Compressor Cascade

In turbomachines, rotors and stators differ by the rotation of the former. Hence, half of each stage is directly influenced by rotation effects. The influence of rotation on the flow structure and its impact on the performance is studied through wall-resolving large Eddy simulations of a rotor with large relative tip gap size. The simulations are performed in a rotating frame with rotation accounted for through a Coriolis force term. In a first step, experimental results are used to provide validation. The main part of the study is the comparison of the results from two simulations, one representing the rotating configuration and one with the Coriolis force removed, without any other change. This setup allows a very clean assessment of the influence of rotation. The turbulence-resolving approach ensures that the turbulent flow features are well represented. The results show a significant impact of rotation on the secondary flow. In the tip region, the tip leakage vortex is enlarged and destabilized. Inside the tip gap, the flow is altered as well, with uniformization in the rotating case. At the blade midspan, no significant effects are observed on the suction side, while an earlier transition to turbulence is found on the pressure side. Near the hub, rotation effects are shown to reduce the corner separation significantly.Funding was provided by the Deutsche Forschungsgemeinschaft (DFG), under FR1593/15-1 and MA4922/8-1 within PAK948. The authors would like to acknowledge stimulating discussions with the partners of this project. Computations were performed at the Centre for Information Services and High Performance Computing (ZIH) at TU Dresden.Postprint (author's final draft

The impact of temperature on the metabolome and endocrine metabolic signals in Atlantic salmon (Salmo salar)

The aim was to elucidate the effects of elevated temperature on growth performance, growth- and appetite-regulating hormones and metabolism in Atlantic salmon, Salmo salar. Post-smolts in seawater (average mass 175 g) that had been reared at 12 °C were kept at three temperatures (8, 12 and 18 °C) and sampled after one and three months. After three months, the fish kept in 18 °C had decreased growth rate and condition factor, and elevated plasma levels of growth hormone (GH) and leptin, compared with fish kept at the lower temperatures. Food conversion efficiency was also decreased at 18 °C, while at the same time protein uptake was improved and thus was not a limiting mechanism for growth. Redistribution of energy stores in fish at the highest temperature is evident as a preference of maintaining length growth during times of limited energy availability. NMR-based metabolomics analyses of plasma revealed that several metabolites involved in energy metabolism were negatively affected by temperature in the upper temperature range of Atlantic salmon. Specifically, the high temperature induced a decline of several amino acids (glutamine, tyrosine and phenylalanine) and a shift in lipid metabolism. It appears likely that the decreased food intake at the highest temperature is linked to an anorexigenic function of leptin, but also that the decreased food intake, feed conversion efficiency and condition factor can be linked to changes in GH endocrinology

Near-wall flow in turbomachinery cascades

This article provides a summarizing account of the results obtained in the current collaborative work of four research institutes concerning near-wall flow in turbomachinery. Specific questions regarding the influences of boundary layer development on blades and endwalls as well as loss mechanisms due to secondary flow are investigated. These address skewness, periodical distortion, wake interaction and heat transfer, among others. Several test rigs with modifiable configurations are used for the experimental investigations including an axial low speed compressor, an axial high-speed wind tunnel, and an axial low-speed turbine. Approved stationary and time resolving measurements techniques are applied in combination with custom hot-film sensor-arrays. The experiments are complemented by URANS simulations, and one group focusses on turbulence-resolving simulations to elucidate the specific impact of rotation. Juxtaposing and interlacing their results the four groups provide a broad picture of the underlying phenomena, ranging from compressors to turbines, from isothermal to non-adiabatic, and from incompressible to compressible flows