421 research outputs found
Finite temperature phase diagram of a polarized Fermi gas in an optical lattice
We present phase diagrams for a polarized Fermi gas in an optical lattice as
a function of temperature, polarization, and lattice filling factor. We
consider the Fulde-Ferrel-Larkin-Ovchinnikov (FFLO), Sarma or breached pair
(BP), and BCS phases, and the normal state and phase separation. We show that
the FFLO phase appears in a considerable portion of the phase diagram. The
diagrams have two critical points of different nature. We show how various
phases leave clear signatures to momentum distributions of the atoms which can
be observed after time of flight expansion.Comment: Journal versio
Noise correlations of the ultra-cold Fermi gas in an optical lattice
In this paper we study the density noise correlations of the two component
Fermi gas in optical lattices. Three different type of phases, the BCS-state
(Bardeen, Cooper, and Schieffer), the FFLO-state (Fulde, Ferrel, Larkin, and
Ovchinnikov), and BP (breach pair) state, are considered. We show how these
states differ in their noise correlations. The noise correlations are
calculated not only at zero temperature, but also at non-zero temperatures
paying particular attention to how much the finite temperature effects might
complicate the detection of different phases. Since one-dimensional systems
have been shown to be very promising candidates to observe FFLO states, we
apply our results also to the computation of correlation signals in a
one-dimensional lattice. We find that the density noise correlations reveal
important information about the structure of the underlying order parameter as
well as about the quasiparticle dispersions.Comment: 25 pages, 11 figures. Some figures are updated and text has been
modifie
Fulde-Ferrell-Larkin-Ovchinnikov phase in the presence of pair hopping interaction
The recent experimental support for the presence of the
Fulde-Ferrell-Larkin-Ovchinnikov (FFLO) phase in the CeCoIn5 directed the
attention towards the mechanisms responsible for this type of
superconductivity. We investigate the FFLO state in a model where
on--site/inter--site pairing coexists with repulsive pair hopping interaction.
The latter interaction is interesting in that it leads to pairing with nonzero
momentum of the Cooper pairs even in the absence of the external magnetic field
(the so-called eta-pairing). It turns out that depending on the strength of the
pair hopping interaction the magnetic field can induce one of two types of the
FFLO phase with different spatial modulations of the order parameter. It is
argued that the properties of the FFLO phase may give information about the
magnitude of the pair hopping interaction. We also show that eta-pairing and
d-wave superconductivity may coexist in the FFLO state. It holds true also for
superconductors which in the absence of magnetic field are of pure d-wave type.Comment: 16 pages, 8 figure
Measurements in a highly polluted Asian mega city: observations of aerosol number size distribution, modal parameters and nucleation events
Diurnal variation of number size distribution (particle size 3-800nm) and modal parameters (geometric standard deviation, geometric mean diameter and modal aerosol particle concentration) in a highly polluted urban environment was investigated during October and November 2002 in New Delhi, India. Continuous monitoring for more than two weeks with the time resolution of 10min was conducted using a Differential Mobility Particle Sizer (twin DMPS). The results indicated clear increase in Aitken mode (25-100nm) particles during traffic peak hours, but towards the evenings there were more Aitken mode particles compared to the mornings. Also high concentrations of accumulation mode particles (>100nm) were detected in the evenings only. In the evenings, biomass/refuse burning and cooking are possible sources beside the traffic. We have also shown that nucleation events are possible in this kind of atmosphere even though as clear nucleation events as observed in rural sites could not be detected. The formation rate of 3nm particles (J3) of the observed events varied from 3.3 to 13.9cm<sup>-3</sup>s<sup>-1</sup> and the growth rate varied from 11.6 to 18.1nmh<sup>-1</sup> showing rapid growth and high formation rate, which seems to be typical in urban areas
Size-Resolved Characterization of Particles and Fibers Released during Abrasion of Fiber-Reinforced Composite in a Workplace Influenced by Ambient Background Sources
Evolution of Cu nanoclusters on Cu(100)
Abstract Using molecular dynamics simulations combined with kinetic Monte Carlo methods we have studied the evolution of copper nanoclusters on a copper (100) surface. We have developed a method for relaxing the clusters into a suitable configuration for input into the kinetic Monte Carlo method using molecular dynamics. Using kinetic Monte Carlo methods we have simulated the evolution of clusters with sizes of 22-2045 atoms at temperatures of 220-1020 K. We found that the Cu clusters on the surface will be reduced to one monolayer if given enough time to relax, and that this process shows an Arrhenius behaviour. In this paper we present the relaxation method that we developed and our observations for the evolution of the clusters
Influence of Collision Cascade Statistics on Pattern Formation of Ion-Sputtered Surfaces
Theoretical continuum models that describe the formation of patterns on
surfaces of targets undergoing ion-beam sputtering, are based on Sigmund's
formula, which describes the spatial distribution of the energy deposited by
the ion. For small angles of incidence and amorphous or polycrystalline
materials, this description seems to be suitable, and leads to the classic BH
morphological theory [R.M. Bradley and J.M.E. Harper, J. Vac. Sci. Technol. A
6, 2390 (1988)]. Here we study the sputtering of Cu crystals by means of
numerical simulations under the binary-collision approximation. We observe
significant deviations from Sigmund's energy distribution. In particular, the
distribution that best fits our simulations has a minimum near the position
where the ion penetrates the surface, and the decay of energy deposition with
distance to ion trajectory is exponential rather than Gaussian. We provide a
modified continuum theory which takes these effects into account and explores
the implications of the modified energy distribution for the surface
morphology. In marked contrast with BH's theory, the dependence of the
sputtering yield with the angle of incidence is non-monotonous, with a maximum
for non-grazing incidence angles.Comment: 12 pages, 13 figures, RevTe
Exposure Assessment of Particulate Matter from Abrasive Treatment of Carbon and Glass Fibre-Reinforced Epoxy-Composites:Two Case Studies
Chemical composition of boundary layer aerosol over the Atlantic Ocean and at an Antarctic site
International audienceAerosol chemical composition was measured over the Atlantic Ocean in November?December 1999 and at the Finnish Antarctic research station Aboa in January 2000. The concentrations of all anthropogenic aerosol compounds decreased clearly from north to south. An anthropogenic influence was still evident in the middle of the tropical South Atlantic, background values were reached south of Cape Town. Chemical mass balance was calculated for high volume filter samples (Dp80% in the Southern Ocean, and 10% in most samples, also at Aboa. The correlation of biomass-burning-related aerosol components with 210Pb was very high compared with that between nss calcium and 210Pb which suggests that 210Pb is a better tracer for biomass burning than for Saharan dust. The ratio of the two clear tracers for biomass burning, nss potassium and oxalate, was different in European and in African samples, suggesting that this ratio could be used as an indicator of biomass burning type. The concentrations of continent-related particles decreased exponentially with the distance from Africa. The shortest half-value distance, ~100 km, was for nss calcium. The half-value distance of particles that are mainly in the submicron particles was ~700±200 km. The MSA to nss sulfate ratio, R, increased faster than MSA concentration with decreasing anthropogenic influence, indicating that the R increase could largely be explained by the decrease of anthropogenic sulfate
Assessment of exposure determinants and exposure levels by using stationary concentration measurements and a probabilistic near-field/far-field exposure model
Background: The Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) regulation requires the establishment of Conditions of Use (CoU) for all exposure scenarios to ensure good communication of safe working practices. Setting CoU requires the risk assessment of all relevant Contributing Scenarios (CSs) in the exposure scenario. A new CS has to be created whenever an Operational Condition (OC) is changed, resulting in an excessive number of exposure assessments. An efficient solution is to quantify OC concentrations and to identify reasonable worst-case scenarios with probabilistic exposure modeling. Methods: Here, we appoint CoU for powder pouring during the industrial manufacturing of a paint batch by quantifying OC exposure levels and exposure determinants. The quantification was performed by using stationary measurements and a probabilistic Near-Field/Far-Field (NF/FF) exposure model. Work shift and OC concentration levels were quantified for pouring TiO 2 from big bags and small bags, pouring Micro Mica from small bags, and cleaning. The impact of exposure determinants on NF concentration level was quantified by (1) assessing exposure determinants correlation with the NF exposure level and (2) by performing simulations with different OCs. Results: Emission rate, air mixing between NF and FF and local ventilation were the most relevant exposure determinants affecting NF concentrations. Potentially risky OCs were identified by performing Reasonable Worst Case (RWC) simulations and by comparing the exposure 95 th percentile distribution with 10% of the occupational exposure limit value (OELV). The CS was shown safe except in RWC scenario (ventilation rate from 0.4 to 1.6 1/h, 100 m 3 room, no local ventilation, and NF ventilation of 1.6 m 3/min). Conclusions: The CoU assessment was considered to comply with European Chemicals Agency (ECHA) legislation and EN 689 exposure assessment strategy for testing compliance with OEL values. One RWC scenario would require measurements since the exposure level was 12.5% of the OELV
- …