Modelling and experimental study on β-phase depletion behaviour of HVOF sprayed free-standing CoNiCrA1Y coatings during oxidation

This paper investigates the β-phase depletion behaviour during oxidation of free-standing CoNiCrA1Y (Co-31.7%Ni-20.8%Cr-8.1%A1-0.5%Y, all in wt%) bond coats prepared by high velocity oxy-fuel (HVOF) thermal spraying. The microstructure of the coatings was characterised using scanning electron microscopy with energy dispersive X-ray (EDX) analysis and electron backscatter diffraction (EBSD). It comprises a two phase structure of fcc γ-Ni and bcc β-NiA1, with grain sizes varying largely from 0.5 to 2 μm for both phases. Isothermal oxidation tests of the free-standing coatings were carried out at 1100 °C for times up to 250 h. The β phase depletion behaviour at the surface was measured and was also simulated using Thermo-Calc and DICTRA software. An A1 flux function derived from an oxide growth model was employed as the boundary condition in the diffusion model. The diffusion calculations were performed using the TTNi7 thermodynamic database together with the MOB2 mobility database. Reasonable agreement was achieved between the measured and the predicted element concentration and phase fraction profiles after various time periods. Grain boundary diffusion is likely to be important to element diffusion in this HVOF sprayed CoNiCrA1Y coating due to the sub-micron grains

An analytical approach to the β-phase coarsening behaviour in a thermally sprayed CoNiCrAlY bond coat alloy

This paper investigates the β-phase coarsening behaviour during isothermal heat treatment of free-standing CoNiCrAlY (Co-31.7%Ni-20.8%Cr-8.1%Al-0.5%Y, all in wt%) coatings prepared by high velocity oxy-fuel (HVOF) thermal spraying. The microstructure of the coatings was characterised using scanning electron microscopy with energy dispersive X-ray (EDX) analysis and electron backscatter diffraction (EBSD). It comprises a two phase structure of fcc γ-Ni matrix and bcc β-NiAl precipitates. The volume fraction of the γ-Ni and the β-NiAl phases were measured to be around 70% and 30% respectively, with grain sizes varying largely from 0.5 to 2 μm for both phases. Isothermal heat treatments of the free-standing coatings were carried out at 1100 C for times up to 250 h. The β-phase coarsening behaviour during isothermal heat treatments was analysed by quantitative metallography. It is shown that the coarsening behaviour of β phase in the CoNiCrAlY alloy followed the classical Lifshitz-Slyozov-Wagner (LSW) theory of Ostwald ripening. By incorporating a dimensionless factor which correlates with volume fraction of the β phase, a modified LSW model coupled with formulaic interfacial energy and effective diffusion coefficient of the CoNiCrAlY alloy was utilised to interpret the coarsening behaviour of the β phase. The coarsening rate coefficient obtained from the modified LSW model shows good agreement with the corresponding experimental result