The Internal Friction and Elastic Modulus of Amorphous Pd-Si and Fe-P-C Alloys

The internal friction and the shear modulus of the amorphous Pd_-Si_, Fe_-P_-C_7 and Fe_-Ni_-P_-C_5 alloys have been measured at about 0.5 Hz over a temperature range from room temperature to about 550℃. The internal friction rises steeply with temperature and shows maxima around the crystallization temperature. The activation energy for the steeply rising internal friction has been estimated by the two different procedures ; from the shift of the curve by the frequency change and from the slope of the 1n Q^ versus 1/T plot. The two values are very different, which indicates the existence of a wide distribution of activation energies. Crystallization of the amorphous alloys resulted in an increase of about 30% in the shear modulus

Internal Friction Peaks of Cold-Worked Dilute Copper-Aluminium Alloys(Metallurgy)

The internal friction of cold-worked Cu-Al alloys is measured with an inverted torsion pendulum in the temperature range between -180℃ and +100℃. Among 10 specimens with different contents of aluminium ranging from 0.01 to 2 at.%, distinct peaks are observed for the two compositions, 0.13 and 0.18 at.%Al, the peak height being larger for the former ; detailed studies are made on 0.13 at.%Al specimens. The peak is introduced by plastic deformation and disappears on annealing at temperatures around +150℃. For a specimen annealed in an oxidizing atmosphere prior to the final deformation, the peak is no longer observed. The peak is considered to be a combined effect of dislocations and aluminium atom-vacancy complexes

An Experimental Study on the Ordered Alloy Ni_2Cr

The ordered alloy Ni_2Cr has been investigated by means of electron diffraction, electron microscopy, calorimetry, resistometry and tensile tests. The formation of the Pt_2Mo type superstructure is revealed by an electron diffraction study on the single crystalline specimens. The size of ordered domains is of the order of magnitude of several hundred A even in the well annealed state. The so-called \u27K-state\u27 which is characterized by the initial increase in electrical resistivity upon isothermal annealing is attributed to the existence of very fine ordered domains. Superdislocations consisting of triple dislocations are sometimes observed in various stages of ordering, and the mechanical properties are briefly discussed in the light of electron microscopic observation. The energy and entropy of transformation are evaluated as about 1.0 kcal/g・atom and 1.2 cal/g・atom-deg on the alloy of 32.1 at% Cr annealed at 500℃ for about 3000 hr

Preselection algorithm based on predictive control for direct matrix converter

This paper presents an enhanced predictive control strategy to reduce the calculation effort for direct matrix converters. The main idea is to preselect the switching states to decrease the calculation effort during each sample period. The proposed preselection algorithm enables a predefined cost function to consider only the preselected switching states to perform the expected control. On the basis of the preselection of switching states at each sample period, the proposed method can effectively reduce the calculation effort as well as show a good performance. The proposed predictive control scheme using only preselected switching states needed to generate the desired source/load current waveforms and control the input power factor. The feasibility of the proposed method is experimentally verified and results are presented in the paper

A Three-Component Gene Expression System and Its Application for Inducible Flavonoid Overproduction in Transgenic Arabidopsis thaliana

Inducible gene expression is a powerful tool to study and engineer genes whose overexpression could be detrimental for the host organisms. However, only limited systems have been adopted in plant biotechnology. We have developed an osmotically inducible system using three components of plant origin, RD29a (Responsive to Dehydration 29A) promoter, CBF3 (C-repeat Binding Factor 3) transcription factor and cpl1-2 (CTD phosphatase-like 1) mutation. The osmotic stress responsible RD29a promoter contains the CBF3 binding sites and thus RD29A-CBF3 feedforward cassette enhances induction of RD29a promoter under stress. The cpl1-2 mutation in a host repressor CPL1 promotes stress responsible RD29a promoter expression. The efficacy of this system was tested using PAP1 (Production of Anthocyanin Pigment 1) transgene, a model transcription factor that regulates the anthocyanin pathway in Arabidopsis. While transgenic plants with only one or two of three components did not reproducibly accumulate anthocyanin pigments above the control level, transgenic cpl1 plants containing homozygous RD29a-PAP1 and RD29a-CBF3 transgenes produced 30-fold higher level of total anthocyanins than control plants upon cold treatment. Growth retardation and phytochemical production of transgenic plants were minimum under normal conditions. The flavonoid profile in cold-induced transgenic plants was determined by LC/MS/MS, which resembled that of previously reported pap1-D plants but enriched for kaempferol derivatives. These results establish the functionality of the inducible three-component gene expression system in plant metabolic engineering. Furthermore, we show that PAP1 and environmental signals synergistically regulate the flavonoid pathway to produce a unique flavonoid blend that has not been produced by PAP1 overexpression or cold treatment alone

The Arabidopsis RNA Polymerase II Carboxyl Terminal Domain (CTD) Phosphatase-Like1 (CPL1) is a biotic stress susceptibility gene

© 2018, The Author(s). Crop breeding for improved disease resistance may be achieved through the manipulation of host susceptibility genes. Previously we identified multiple Arabidopsis mutants known as enhanced stress response1 (esr1) that have defects in a KH-domain RNA-binding protein and conferred increased resistance to the root fungal pathogen Fusarium oxysporum. Here, screening the same mutagenized population we discovered two further enhanced stress response mutants that also conferred enhanced resistance to F. oxysporum. These mutants also have enhanced resistance to a leaf fungal pathogen (Alternaria brassicicola) and an aphid pest (Myzus persicae), but not to the bacterial leaf pathogen Pseudomonas syringae. The causal alleles in these mutants were found to have defects in the ESR1 interacting protein partner RNA Polymerase II Carboxyl Terminal Domain (CTD) Phosphatase-Like1 (CPL1) and subsequently given the allele symbols cpl1-7 and cpl1-8. These results define a new role for CPL1 as a pathogen and pest susceptibility gene. Global transcriptome analysis and oxidative stress assays showed these cpl1 mutants have increased tolerance to oxidative stress. In particular, components of biotic stress responsive pathways were enriched in cpl1 over wild-type up-regulated gene expression datasets including genes related to defence, heat shock proteins and oxidative stress/redox state processes

The HBZ gene, a key player in HTLV-1 pathogenesis

Human T-cell leukemia virus type 1 (HTLV-1) causes adult T-cell leukemia/lymphoma (ATL) and is also associated with a variety of lymphocyte-mediated diseases. The HTLV-1 basic leucine zipper (HBZ) gene, found to be consistently expressed in ATL, has recently been the subject of intensive research efforts. In this review, we summarize recent findings about HBZ and discuss its roles and functions not only in the virus life cycle, but also in HTLV-1 disease pathogenesis

Restriction Site Extension PCR: A Novel Method for High-Throughput Characterization of Tagged DNA Fragments and Genome Walking

BACKGROUND: Insertion mutant isolation and characterization are extremely valuable for linking genes to physiological function. Once an insertion mutant phenotype is identified, the challenge is to isolate the responsible gene. Multiple strategies have been employed to isolate unknown genomic DNA that flanks mutagenic insertions, however, all these methods suffer from limitations due to inefficient ligation steps, inclusion of restriction sites within the target DNA, and non-specific product generation. These limitations become close to insurmountable when the goal is to identify insertion sites in a high throughput manner. METHODOLOGY/PRINCIPAL FINDINGS: We designed a novel strategy called Restriction Site Extension PCR (RSE-PCR) to efficiently conduct large-scale isolation of unknown genomic DNA fragments linked to DNA insertions. The strategy is a modified adaptor-mediated PCR without ligation. An adapter, with complementarity to the 3' overhang of the endonuclease (KpnI, NsiI, PstI, or SacI) restricted DNA fragments, extends the 3' end of the DNA fragments in the first cycle of the primary RSE-PCR. During subsequent PCR cycles and a second semi-nested PCR (secondary RSE-PCR), touchdown and two-step PCR are combined to increase the amplification specificity of target fragments. The efficiency and specificity was demonstrated in our characterization of 37 tex mutants of Arabidopsis. All the steps of RSE-PCR can be executed in a 96 well PCR plate. Finally, RSE-PCR serves as a successful alternative to Genome Walker as demonstrated by gene isolation from maize, a plant with a more complex genome than Arabidopsis. CONCLUSIONS/SIGNIFICANCE: RSE-PCR has high potential application in identifying tagged (T-DNA or transposon) sequence or walking from known DNA toward unknown regions in large-genome plants, with likely application in other organisms as well

Fibroblast growth factor 23 is associated with proteinuria and smoking in chronic kidney disease: An analysis of the MASTERPLAN cohort

Contains fulltext : 107913.pdf (postprint version ) (Open Access)BACKGROUND: Fibroblast growth factor 23 (FGF23) has emerged as a risk factor for cardiovascular disease and mortality throughout all stages of chronic kidney disease (CKD), independent from established risk factors and markers of mineral homeostasis. The relation of FGF23 with other renal and non-renal cardiovascular risk factors is not well established. METHODS: Using stored samples, plasma FGF23 was determined in 604 patients with moderate to severe kidney disease that participated in the MASTERPLAN study (ISRCTN73187232). The association of FGF23 with demographic and clinical parameters was evaluated using multivariable regression models. RESULTS: Mean age in the study population was 60 years and eGFR was 37 (+/- 14) ml/min/1.73 m(2). Median proteinuria was 0.3 g/24 hours [IQR 0.1-0.9]. FGF23 level was 116 RU/ml [67-203] median and IQR. Using multivariable analysis the natural logarithm of FGF23 was positively associated with history of cardiovascular disease (B = 0.224 RU/ml; p = 0.002), presence of diabetes (B = 0.159 RU/ml; p = 0.035), smoking (B = 0.313 RU/ml; p < 0.001), phosphate level (B = 0.297 per mmol/l; p = 0.0024), lnPTH (B = 0.244 per pmol/l; p < 0.001) and proteinuria (B = 0.064 per gram/24 hrs; p = 0.002) and negatively associated with eGFR (B = -0.022 per ml/min/1.73 m(2); p < 0.001). CONCLUSIONS: Our study demonstrates that in patients with CKD, FGF23 is related to proteinuria and smoking. We confirm the relation between FGF23 and other cardiovascular risk factors