Fundamental study of transpiration cooling

Isothermal and non-isothermal pressure drop data and heat transfer data generated on porous 304L stainless steel wire forms, sintered spherical stainless steel powder, and sintered spherical OFHC copper powder are reported and correlated. Pressure drop data was collected over a temperature range from 500 R to 2000 R and heat transfer data collected over a heat flux range from 5 to 15 BTU/in2/sec. It was found that flow data could be correlated independently of transpirant temperature and type (i.e., H2, N2). It was also found that no simple relation between heat transfer coefficient and specimen porosity was obtainable

Electronic states and optical properties of PbSe nanorods and nanowires

A theory of the electronic structure and excitonic absorption spectra of PbS and PbSe nanowires and nanorods in the framework of a four-band effective mass model is presented. Calculations conducted for PbSe show that dielectric contrast dramatically strengthens the exciton binding in narrow nanowires and nanorods. However, the self-interaction energies of the electron and hole nearly cancel the Coulomb binding, and as a result the optical absorption spectra are practically unaffected by the strong dielectric contrast between PbSe and the surrounding medium. Measurements of the size-dependent absorption spectra of colloidal PbSe nanorods are also presented. Using room-temperature energy-band parameters extracted from the optical spectra of spherical PbSe nanocrystals, the theory provides good quantitative agreement with the measured spectra.Comment: 35 pages, 12 figure

Electronic Structure of Electron-doped Sm1.86Ce0.14CuO4: Strong `Pseudo-Gap' Effects, Nodeless Gap and Signatures of Short Range Order

Angle resolved photoemission (ARPES) data from the electron doped cuprate superconductor Sm$_{1.86}$Ce$_{0.14}$CuO$_4$ shows a much stronger pseudo-gap or "hot-spot" effect than that observed in other optimally doped $n$-type cuprates. Importantly, these effects are strong enough to drive the zone-diagonal states below the chemical potential, implying that d-wave superconductivity in this compound would be of a novel "nodeless" gap variety. The gross features of the Fermi surface topology and low energy electronic structure are found to be well described by reconstruction of bands by a $\sqrt{2}\times\sqrt{2}$ order. Comparison of the ARPES and optical data from the $same$ sample shows that the pseudo-gap energy observed in optical data is consistent with the inter-band transition energy of the model, allowing us to have a unified picture of pseudo-gap effects. However, the high energy electronic structure is found to be inconsistent with such a scenario. We show that a number of these model inconsistencies can be resolved by considering a short range ordering or inhomogeneous state.Comment: 5 pages, 4 figure

Statistical Basis for Predicting Technological Progress

Forecasting technological progress is of great interest to engineers, policy makers, and private investors. Several models have been proposed for predicting technological improvement, but how well do these models perform? An early hypothesis made by Theodore Wright in 1936 is that cost decreases as a power law of cumulative production. An alternative hypothesis is Moore's law, which can be generalized to say that technologies improve exponentially with time. Other alternatives were proposed by Goddard, Sinclair et al., and Nordhaus. These hypotheses have not previously been rigorously tested. Using a new database on the cost and production of 62 different technologies, which is the most expansive of its kind, we test the ability of six different postulated laws to predict future costs. Our approach involves hindcasting and developing a statistical model to rank the performance of the postulated laws. Wright's law produces the best forecasts, but Moore's law is not far behind. We discover a previously unobserved regularity that production tends to increase exponentially. A combination of an exponential decrease in cost and an exponential increase in production would make Moore's law and Wright's law indistinguishable, as originally pointed out by Sahal. We show for the first time that these regularities are observed in data to such a degree that the performance of these two laws is nearly tied. Our results show that technological progress is forecastable, with the square root of the logarithmic error growing linearly with the forecasting horizon at a typical rate of 2.5% per year. These results have implications for theories of technological change, and assessments of candidate technologies and policies for climate change mitigation

Tunable spin-selective loading of a silicon spin qubit

The remarkable properties of silicon have made it the central material for the fabrication of current microelectronic devices. Silicon's fundamental properties also make it an attractive option for the development of devices for spintronics and quantum information processing. The ability to manipulate and measure spins of single electrons is crucial for these applications. Here we report the manipulation and measurement of a single spin in a quantum dot fabricated in a silicon/silicon-germanium heterostructure. We demonstrate that the rate of loading of electrons into the device can be tuned over an order of magnitude using a gate voltage, that the spin state of the loaded electron depends systematically on the loading voltage level, and that this tunability arises because electron spins can be loaded through excited orbital states of the quantum dot. The longitudinal spin relaxation time T1 is measured using single-shot pulsed techniques and found to be ~3 seconds at a field of 1.85 Tesla. The demonstration of single spin measurement as well as a long spin relaxation time and tunability of the loading are all favorable properties for spintronics and quantum information processing applications.Comment: 4 pages, 3 figures, Supplemental Informatio

ADC normalization: A promising research track for diffusion-weighted MR imaging of the abdomen

n/

Quantum control and process tomography of a semiconductor quantum dot hybrid qubit

The similarities between gated quantum dots and the transistors in modern microelectronics - in fabrication methods, physical structure, and voltage scales for manipulation - have led to great interest in the development of quantum bits (qubits) in semiconductor quantum dots. While quantum dot spin qubits have demonstrated long coherence times, their manipulation is often slower than desired for important future applications, such as factoring. Further, scalability and manufacturability are enhanced when qubits are as simple as possible. Previous work has increased the speed of spin qubit rotations by making use of integrated micromagnets, dynamic pumping of nuclear spins, or the addition of a third quantum dot. Here we demonstrate a new qubit that offers both simplicity - it requires no special preparation and lives in a double quantum dot with no added complexity - and is very fast: we demonstrate full control on the Bloch sphere with $\pi$-rotation times less than 100 ps in two orthogonal directions. We report full process tomography, extracting high fidelities equal to or greater than 85% for X-rotations and 94% for Z-rotations. We discuss a path forward to fidelities better than the threshold for quantum error correction.Comment: 6 pages, excluding Appendi

Cosmological perturbations in a healthy extension of Horava gravity

In Horava's theory of gravity, Lorentz symmetry is broken in exchange for renormalizability, but the original theory has been argued to be plagued with problems associated with a new scalar mode stemming from the very breaking of Lorentz symmetry. Recently, Blas, Pujolas, and Sibiryakov have proposed a healthy extension of Horava gravity, in which the behavior of the scalar mode is improved. In this paper, we study scalar modes of cosmological perturbations in extended Horava gravity. The evolution of metric and density perturbations is addressed analytically and numerically. It is shown that for vanishing non-adiabatic pressure of matter the large scale evolution of cosmological perturbations converges to that described by a single constant, $\zeta$, which is an analog of a curvature perturbation on the uniform-density slicing commonly used in usual gravitational theories. The subsequent evolution is thus determined completely by the value of $\zeta$.Comment: 10 pages, 4 figures; v2: published versio

Essential requirements for setting up a stem cell processing laboratory

The Graft Processing subcommittee of the Worldwide Network for Blood and Marrow Transplantation wrote this guideline to assist physicians and laboratory technologists with the setting up of a cell processing laboratory (CPL) to support a hematopoietic stem cell transplant program, thereby facilitating the start-up of a transplant program in a new location and improving patient access to transplantation worldwide. This guideline describes the minimal essential features of designing such a laboratory and provides a list of equipment and supply needs and staffing recommendations. It describes the typical scope of services that a CPL is expected to perform, including product testing services, and discusses the basic principles behind the most frequent procedures. Quality management (QM) principles specific to a CPL are also discussed. References to additional guidance documents that are available worldwide to assist with QM and regulatory compliance are also provided. © 2014 Macmillan Publishers Limited All rights reserved