60 research outputs found
3D printable electroconductive gelatinâhyaluronic acid materials containing polypyrrole nanoparticles for electroactive tissue engineering
Electrically conductive bio-scaffolds are explored in the field of tissue engineering (TE) as a solution to address the clinical need of electroactive tissues, finding applications in nervous, cardiac, and spinal cord injury repair. In this work, we synthesise polypyrrole nanoparticles (PPy NP) via the mini-emulsion method with further combination with a gelatin/hyaluronic acid (HA) hydrogel to create electroconductive Gel:HA:PPy-NP TE scaffolds. Electroconductive Gel:HA:PPy-NP scaffolds possess excellent mechanical properties at 1.08 ñ 0.26 MPa, closely matching the reported mechanical performance of the spinal cord. Scaffolds were designed with controlled porosity of 526.2 ñ 74.6Ăą 403.9 ñ 57.4 ĂÂŒm, and conductivities of 4.3 Ă 10 Ăą 6 ñ 1.1 Ă 10 Ăą 6 S.cm Ăą 1 were reached. Rheological studies show that prior to lyophilisation, the Gel:HA:PPy-NP hydrogels
display a shear-thinning behaviour. These gels were subsequently 3D printed into predefined 2 layer lattice geometries and displayed excellent post-printing shape fidelity. In vitro studies show that the Gel:HA:PPy-NP scaffolds are cytocompatible with mesenchymal stem cells and neuronal stem cells and display encouraging cell attachment and proliferation profiles. Based on these results, the incorporation of PPy NPs into Gel:HA biomaterial scaffolds enhances the conductive capabilities of the material, while showcasing biocompatible behaviour with cell cultures. Hence, Gel:HA:PPy-NP scaffolds are a promising TE option for stimulating regeneration following nervous tissue injury.The authors would like to thank the funding provided by the Irish Research Council through the Irish Research Council Enterprise Partnership Scheme with Johnson and Johnson (EPSPG/2020/78), as well as the Irish Fulbright Commission
Characterizing the degradation of alginate hydrogel for use in multilumen scaffolds for spinal cord repair
Alginate was studied as a degradable nerve guidance scaffold material in vitro and in vivo. In vitro degradation rates were determined using rheology to measure the change in shear modulus vs time. The shear modulus decreased from 155 kPa to 5 kPa within 2 days; however, alginate samples maintained their superficial geometry for over 28 days. The degradation behavior was supported by materials characterization data showing alginate consisted of high internal surface area (400 m2/g), which likely facilitated the release of crossâlinking cations resulting in the rapid decrease in shear modulus. To assess the degradation rate in vivo, multilumen scaffolds were fabricated using a fiber templating technique. The scaffolds were implanted in a 2âmmâlong T3 full transection rodent spinal cord lesion model for 14 days. Although there was some evidence of axon guidance, in general, alginate scaffolds degraded before axons could grow over the 2âmmâlong lesion. Enabling alginateâbased scaffolds for nerve repair will likely require approaches to slow its degradation. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 611â619, 2016.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/137597/1/jbma35600.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/137597/2/jbma35600_am.pd
Peripheral nerve growth within a hydrogel microchannel scaffold supported by a kinkâresistant conduit
Nerve repair in several mmâlong nerve gaps often requires an interventional technology. Microchannel scaffolds have proven effective for bridging nerve gaps and guiding axons in the peripheral nervous system (PNS). Nonetheless, fabricating microchannel scaffolds at this length scale remains a challenge and/or is time consuming and cumbersome. In this work, a simple computerâaided microdrilling technique was used to fabricate 10 mmâlong agarose scaffolds consisting of 300 ”mâmicrochannels and 85 ”mâthick walls in less than an hour. The agarose scaffolds alone, however, did not exhibit adequate stiffness and integrity to withstand the mechanical stresses during implantation and suturing. To provide mechanical support and enable suturing, poly caprolactone (PCL) conduits were fabricated and agarose scaffolds were placed inside. A modified saltâleaching technique was developed to introduce interconnected porosity in PCL conduits to allow for tuning of the mechanical properties such as elastic modulus and strain to failure. It was shown that the PCL conduits were effective in stabilizing the agarose scaffolds in 10 mmâlong sciatic nerve gaps of rats for at least 8 weeks. Robust axon ingress and Schwann cell penetration were observed within the microchannel scaffolds without using growth factors. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 3392â3399, 2017.Peer Reviewedhttps://deepblue.lib.umich.edu/bitstream/2027.42/139110/1/jbma36186_am.pdfhttps://deepblue.lib.umich.edu/bitstream/2027.42/139110/2/jbma36186.pd
Different mechanisms by which anti-DNA MoAbs bind to human endothelial cells and glomerular mesangial cells
Binding of anti-DNA antibodies and inhibition of glomerulonephritis in MRL-lpr/lpr mice by heparin
Recommended from our members
Hierarchically Ordered Porous and High-Volume Polycaprolactone Microchannel Scaffolds Enhanced Axon Growth in Transected Spinal Cords.
The goal of this work was to design nerve guidance scaffolds with a unique architecture to maximize the open volume available for nerve growth. Polycaprolactone (PCL) was selected as the scaffold material based on its biocompatibility and month-long degradation. Yet, dense PCL does not exhibit suitable properties such as porosity, stiffness, strength, and cell adhesion to function as an effective nerve guidance scaffold. To address these shortcomings, PCL was processed using a modified salt-leaching technique to create uniquely controlled interconnected porosity. By controlling porosity, we demonstrated that the elastic modulus could be controlled between 2.09 and 182.1âMPa. In addition, introducing porosity and/or coating with fibronectin enhanced the PCL cell attachment properties. To produce PCL scaffolds with maximized open volume, porous PCL microtubes were fabricated and translated into scaffolds with 60 volume percent open volume. The scaffolds were tested in transected rat spinal cords. Linear axon growth within both the microtubes as well as the interstitial space between the tubes was observed, demonstrating that the entire open volume of the scaffold was available for nerve growth. Overall, a novel scaffold architecture and fabrication technique are presented. The scaffolds exhibit significantly higher volume than state-of-the-art scaffolds for promising spinal cord nerve repair
3D printable electroconductive gelatinâhyaluronic acid materials containing polypyrrole nanoparticles for electroactive tissue engineering
Electrically conductive bio-scaffolds are explored in the field of tissue engineering (TE) as a solution to address the clinical need of electroactive tissues, finding applications in nervous, cardiac, and spinal cord injury repair. In this work, we synthe[1]sise polypyrrole nanoparticles (PPy NP) via the mini-emulsion method with further combination with a gelatin/hyaluronic acid (HA) hydrogel to create electroconductive Gel:HA:PPy-NP TE scaffolds. Electroconductive Gel:HA:PPy-NP scaffolds possess excellent mechanical properties at 1.08±0.26 MPa, closely matching the reported mechanical performance of the spinal cord. Scaffolds were designed with controlled porosity of 526.2±74.6â403.9±57.4 ”m, and conductivities of 4.3Ă10â 6±1.1 Ă 10â6 S.cmâ1 were reached. Rheological studies show that prior to lyophilisation, the Gel:HA:PPy-NP hydrogels display a shear-thinning behaviour. These gels were subsequently 3D printed into predefined 2 layer lattice geometries and displayed excellent post-printing shape fidelity. In vitro studies show that the Gel:HA:PPy-NP scaffolds are cytocompatible with mesenchymal stem cells and neuronal stem cells and display encouraging cell attachment and proliferation profiles. Based on these results, the incorporation of PPy NPs into Gel:HA biomaterial scaffolds enhances the conductive capabili[1]ties of the material, while showcasing biocompatible behaviour with cell cultures. Hence, Gel:HA:PPy-NP scaffolds are a promising TE option for stimulating regeneration following nervous tissue injury.</p
Engineered Vascular Beds Provide Key Signals to Pancreatic Hormone-Producing Cells
<div><p>The mechanisms underlying early islet graft failure are not entirely clear, but are thought to involve ischemic injury due to delayed vascularization. We hypothesize that blood vessels play an active role in cell-cell communications supporting islet survival and engraftment. To test this hypothesis and to uncouple endothelial cell (EC)-generated signaling stimuli from their nutritional and gas exchange functions, we developed three dimensional (3D) endothelial vessel networks in engineered pancreatic tissues prepared from islets, fibroblasts and ECs. The tri-culture setup, seeded on highly porous biocompatible polymeric scaffolds closely mimics the natural anatomical context of pancreatic vasculature. Enhanced islet survival correlating with formation of functional tube-like endothelial vessels was demonstrated. Addition of foreskin fibroblasts to islet-endothelial cultures promoted tube-like structure formation, which further supported islet survival as well as insulin secretion. Gene expression profiles of EC growth factors, extracellular matrix (ECM), morphogenes and differentiation markers were significantly different in 2D versus 3D culture systems and were further modified upon addition of fibroblasts. Implantation of prevascularized islets into diabetic mice promoted survival, integration and function of the engrafted engineered tissue, supporting the suggested role of ECs in islet survival. These findings present potential strategies for preparation of transplantable islets with increased survival prospects.</p> </div
Expression profiles of EC morphogenesis-related genes.
<p>Quantitative real-time PCR analyses, using human specific primers were performed on islet-EC settings following their culture (<b>a</b>) with HFF in a 3D co-culture system or (<b>b</b>) with HFF in a 2D co-culture system. (<b>c</b>) Relative gene expression between 3D/2D multicellular culture systems. (<b>d</b>) Relative gene expression between 3D/2D co-culture systems. Values were normalized to human GAPDH.</p
- âŠ