Petiolate wings: effects on the leading-edge vortex in flapping flight

The wings of many insect species including crane flies and damselflies are petiolate (on stalks), with the wing planform beginning some distance away from the wing hinge, rather than at the hinge. The aerodynamic impact of flapping petiolate wings is relatively unknown, particularly on the formation of the lift-augmenting leading-edge vortex (LEV): a key flow structure exploited by many insects, birds and bats to enhance their lift coefficient. We investigated the aerodynamic implications of petiolation P using particle image velocimetry flow field measurements on an array of rectangular wings of aspect ratio 3 and petiolation values of P = 1–3. The wings were driven using a mechanical device, the ‘Flapperatus’, to produce highly repeatable insect-like kinematics. The wings maintained a constant Reynolds number of 1400 and dimensionless stroke amplitude Λ* (number of chords traversed by the wingtip) of 6.5 across all test cases. Our results showed that for more petiolate wings the LEV is generally larger, stronger in circulation, and covers a greater area of the wing surface, particularly at the mid-span and inboard locations early in the wing stroke cycle. In each case, the LEV was initially arch-like in form with its outboard end terminating in a focus-sink on the wing surface, before transitioning to become continuous with the tip vortex thereafter. In the second half of the wing stroke, more petiolate wings exhibit a more detached LEV, with detachment initiating at approximately 70% and 50% span for P = 1 and 3, respectively. As a consequence, lift coefficients based on the LEV are higher in the first half of the wing stroke for petiolate wings, but more comparable in the second half. Time-averaged LEV lift coefficients show a general rise with petiolation over the range tested.This work was supported by an EPSRC Career Acceleration Fellowship to R.J.B. (EP/H004025/1)

The effect of aspect ratio on the leading-edge vortex over an insect-like flapping wing

Insect wing shapes are diverse and a renowned source of inspiration for the new generation of autonomous flapping vehicles, yet the aerodynamic consequences of varying geometry is not well understood. One of the most defining and aerodynamically significant measures of wing shape is the aspect ratio, defined as the ratio of wing length (R) to mean wing chord ($\bar{c}$). We investigated the impact of aspect ratio, AR, on the induced flow field around a flapping wing using a robotic device. Rigid rectangular wings ranging from AR = 1.5 to 7.5 were flapped with insect-like kinematics in air with a constant Reynolds number (Re) of 1400, and a dimensionless stroke amplitude of $6.5\bar{c}$ (number of chords traversed by the wingtip). Pseudo-volumetric, ensemble-averaged, flow fields around the wings were captured using particle image velocimetry at 11 instances throughout simulated downstrokes. Results confirmed the presence of a high-lift, separated flow field with a leading-edge vortex (LEV), and revealed that the conical, primary LEV grows in size and strength with increasing AR. In each case, the LEV had an arch-shaped axis with its outboard end originating from a focus-sink singularity on the wing surface near the tip. LEV detachment was observed for $\mathrm{AR}\gt 1.5$ around mid-stroke at $\sim 70\%$ span, and initiated sooner over higher aspect ratio wings. At $\mathrm{AR}\gt 3$ the larger, stronger vortex persisted under the wing surface well into the next half-stroke leading to a reduction in lift. Circulatory lift attributable to the LEV increased with AR up to AR = 6. Higher aspect ratios generated proportionally less lift distally because of LEV breakdown, and also less lift closer to the wing root due to the previous LEV's continuing presence under the wing. In nature, insect wings go no higher than $\mathrm{AR}\sim 5,$ likely in part due to architectural and physiological constraints but also because of the reducing aerodynamic benefits of high AR wings

Benchmark full configuration-interaction calculations on HF and NH2

Full configuration-interaction (FCI) calculations are performed at selected geometries for the 1-sigma(+) state of HF and the 2-B(1) and 2-A(1) states of NH2 using both DZ and DZP gaussian basis sets. Higher excitations become more important when the bonds are stretched and the self-consistent field (SCF) reference becomes a poorer zeroth-order description of the wave function. The complete active space SCF - multireference configuration-interaction (CASSCF-MRCI) procedure gives excellent agreement with the FCI potentials, especially when corrected with a multi-reference analog of the Davidson correction

A room temperature 19-channel magnetic field mapping device for cardiac signals

We present a multichannel cardiac magnetic field imaging system built in Fribourg from optical double-resonance Cs vapor magnetometers. It consists of 25 individual sensors designed to record magnetic field maps of the beating human heart by simultaneous measurements on a grid of 19 points over the chest. The system is operated as an array of second order gradiometers using sophisticated digitally controlled feedback loops.Comment: 3 pages, 3 figures, submitted to Applied Physics Letter

Biomimetic surface functionalization of clinically relevant metals used as orthopaedic and dental implants

Titanium and its alloys or tantalum (Ta) are materials used in orthopaedic and dental implants due to their excellent mechanical properties and biocompatibility. However, their bioactivity and osteoconductivity is low. With a view to improving the bioactivity of these materials we hypothesised that the surface of Ta and TiAl6V4 can be functionalised with biomimetic, amorphous nano-sized calcium phosphate (CaP) apatite-like deposits, instead of creating uniform coatings, which can lead to flaking, delamination and poor adherence. We used Ta and TiAl6V4 metal discs with smooth and rough surfaces. Amorphous CaP apatite-like particles were deposited on the different surfaces by a biomimetic rapid two-step soaking method using concentrated simulated body fluid (SBF) solutions without a pre-treatment of the metal surfaces to induce CaP deposition. Immersion times in the second SBF solution of 48 and 18 h for Ta and TiAl6V4 respectively produced CaP deposits composed of amorphous globular nano-sized particles that also contained Mg, C and O. Longer immersion times produced more uniform coatings as well as an undesired calcite mineral phase. Prediction of in vivo behaviour by immersion in regular SBF showed that the obtained CaP deposits would act as a catalyst to rapidly form a Ca deficient CaP layer that also incorporates Mg. The amorphous CaP apatite-like deposits promoted initial attachment, proliferation and osteogenic differentiation of bone marrow derived mesenchymal stem cells. Finally, we used our method to functionalise 3D porous structures of titanium alloy made by selective laser sintering. Our study uses a novel and cost-effective approach to functionalise clinically relevant metal surfaces in order to increase the bioactivity of these materials, which could improve their clinical performance

Narratives that nudge: Raising theoretical questions about reflective practice

The narratives of pre-service teachers in this paper tell a story which interrupts the notion that reflective practice necessarily produces a transformative self. Although this argument is not new, the extent to which the utility of reflective practice is taken for granted in the current context of teacher education (beginning and continuing) remains greater than ever. We show how this normative construction of reflective practice and the understandings of self that it produces in the narratives of pre-service teachers are undermined in the context of schooling. We suggest that further research is needed in this area. Through this effort we raise questions about the spaces in which reflective practice is assumed to operate and the ways in which the reflective self it assumes has been disconnected from society and relations of power. We situate ourselves as teachers, teacher educators and researchers who desire theoretically informed positions from which we can begin to critically address, extend or displace our current understandings of these issues. This paper raises questions about reflective practice and its relationship to pedagogy within the current context of schooling

A tyrosine-rich amelogenin peptide promotes neovasculogenesis in vitro and ex vivo

The formation of new blood vessels has been shown to be fundamental in the repair of many damaged tissues, and we have recently shown that the adult human periodontal ligament contains multipotent stem/progenitor cells that are capable of undergoing vasculogenic and angiogenic differentiation in vitro and ex vivo. Enamel matrix protein (EMP) is a heterogeneous mixture of mainly amelogenin-derived proteins produced during tooth development and has been reported to be sometimes effective in stimulating these processes, including in clinical regeneration of the periodontal ligament. However, the identity of the specific bioactive component of EMP remains unclear. In the present study we show that, while the high-molecular-weight Fraction A of enamel matrix derivative (a heat-treated form of EMP) is unable to stimulate the vasculogenic differentiation of human periodontal ligament cells (HPC) in vitro, the low-molecular-weight Fraction C significantly up-regulates the expression of the endothelial markers VEGFR2, Tie-1, Tie-2, VE-cadherin and vWF and markedly increases the internalization of low-density lipoprotein. Furthermore, we also demonstrate, for the first time, that the synthetic homolog of the 45-amino acid tyrosine-rich amelogenin peptide (TRAP) present in Fraction C is likely to be responsible for its vasculogenesis-inducing activity. Moreover, the chemically synthesized TRAP peptide is also shown here to be capable of up-regulating the angiogenic differentiation of the HPC, based on its marked stimulation of in vitro cell migration and tubule formation and of blood vessel formation assay in a chick embryo chorioallantoic membrane model ex vivo. This novel peptide, and modified derivatives, might thereby represent a new class of regenerative drug that has the ability to elicit new blood vessel formation and promote wound healing in vivo. © 2013 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved

Performance of QCT-Derived scapula finite element models in predicting local displacements using digital volume correlation

Subject-specific finite element models (FEMs) of the shoulder complex are commonly used to predict differences in internal load distribution due to injury, treatment or disease. However, these models rely on various underlying assumptions, and although experimental validation is warranted, it is difficult to obtain and often not performed. The goal of the current study was to quantify the accuracy of local displacements predicted by subject-specific QCT-based FEMs of the scapula, compared to experimental measurements obtained by combining digital volume correlation (DVC) and mechanical loading of cadaveric specimens within a microCT scanner. Four cadaveric specimens were loaded within a microCT scanner using a custom-designed six degree-of-freedom hexapod robot augmented with carbon fiber struts for radiolucency. BoneDVC software was used to quantify full-field experimental displacements between pre- and post-loaded scans. Corresponding scapula QCT-FEMs were generated and three types of boundary conditions (BC) (idealized-displacement, idealized-force, and DVC-derived) were simulated for each specimen. DVC-derived BCs resulted in the closest match to the experimental results for all specimens (best agreement: slope ranging from 0.87 to 1.09; highest correlation: r2 ranging from 0.79 to 1.00). In addition, a two orders of magnitude decrease was observed in root-mean-square error when using QCT-FEMs with simulated DVC-derived BCs compared to idealized-displacement and idealized-force BCs. The results of this study demonstrate that scapula QCT-FEMs can accurately predict local experimental full-field displacements if the BCs are derived from DVC measurements

Controlling unsteady cavity flows using internal structures

We report experimental measurements and preliminary analysis on a series of geometric modifications to a rectangular cavity, aimed at alleviating the severity of the aeroacoustic environment. The cavity had a length-to-depth ratio of 5 and a width-to-depth ratio of 1, and featured a simplified representation of a generic missile on the centre line. The modifications consisted of full width and depth ribs or “collars” with a cutout for the missile. Collars could be fitted at various combinations of locations in the cavity and were either straight (i.e. perpendicular to the cavity centre line), leaned or yawed. The cavity flowfield was characterised by surface pressure measurements along the ceiling. Judging from the available measurements the presence of collars modified the mean pressure distribution, and appeared to reduce the acoustic tones and generally lower the broadband noise