1,880 research outputs found
Acoustic tests of duct-burning turbofan jet noise simulation
The results of a static acoustic and aerodynamic performance, model-scale test program on coannular unsuppressed and multielement fan suppressed nozzle configurations are summarized. The results of the static acoustic tests show a very beneficial interaction effect. When the measured noise levels were compared with the predicted noise levels of two independent but equivalent conical nozzle flow streams, noise reductions for the unsuppressed coannular nozzles were of the order of 10 PNdB; high levels of suppression (8 PNdB) were still maintained even when only a small amount of core stream flow was used. The multielement fan suppressed coannular nozzle tests showed 15 PNdB noise reductions and up to 18 PNdB noise reductions when a treated ejector was added. The static aerodynamic performance tests showed that the unsuppressed coannular plug nozzles obtained gross thrust coefficients of 0.972, with 1.2 to 1.7 percent lower levels for the multielement fan-suppressed coannular flow nozzles. For the first time anywhere, laser velocimeter velocity profile measurements were made on these types of nozzle configurations and with supersonic heated flow conditions. Measurements showed that a very rapid decay in the mean velocity occurs for the nozzle tested
Acoustic tests of duct-burning turbofan jet noise simulation: Comprehensive data report. Volume 2: Model design and aerodynamic test results
The selection procedure is described which was used to arrive at the configurations tested, and the performance characteristics of the test nozzles are given
A temporal and spatial study of invertebrate communities associated with hard-bottom habitats in the South Atlantic Bight
Species composition, biomass, density, and diversity of benthic invertebrates from six bard-bottom areas were evaluated. Seasonal collections using a dredge, trawl, and suction and grab samplers yielded 432, 525, and 845 taxa, respectively. Based on collections wltb the different gear types, species composition of invertebrates was found to change bathymetrically. Inner- and mlddle-shelf sites were more similar to each other in terms of invertebrate species composition than they were to outer-shelf sites, regardless of season. Sites on the inner and outer shelf were grouped according to latitude; however, results suggest that depth is apparently a more important determinant of invertebrate species composition than either season or latitude. Sponges generally dominated dredge and trawl collections in terms of biomass. Generally, cnidarians, bryozoans, and sponges
dominated at sites In terms of number of taxa collected.
The most abundant smaller macrofauna collected in suction and grab samples were polychaetes, amphipods, and mollusks. Densities of the numerically dominant species changed botb seasonally and bathymetrically, with very few of these species restricted to a specific bathymetrlc zone.
The high diversity of invertebrates from hard-bottom sites is attributed to the large number of rare species. No consistent seasonal changes in diversity or number of species were noted for individual stations or depth zones. In addition, H and its components showed no definite patterns related to depth or latitude. However, more species were collected at middle-shelf sites than at inner- or outer-shelf sites, which may be related to more
stable bottom temperature or greater habitat complexity in that area. (PDF file contains 110 pages.
Acoustic tests of duct-burning turbofan jet noise simulation: Comprehensive data report. Volume 1, section 3: Data plots
Acoustic data plots are presented which were obtained in the tests on scale nozzles for use on duct-burning turbofan engines
Acoustic tests of duct-burning turbofan jet noise simulation: Comprehensive data report. Volume 1, section 2: Full size data
Acoustic data are presented scaled to a full size engine by a factor of 8 on a 96.9 m (320 ft) arc and a 731.5 m (2400 ft) sideline
Acoustic tests of duct-burning turbofan jet noise simulation: Comprehensive data report. Volume 1, section 1: Model scale data
Model scale data on a 12.2 m (40 ft) arc are presented which were obtained in the hot, static acoustic tests on eleven nozzle designs suitable for use on duct-burning turbofan engines
Switchable nonlinear metasurfaces for absorbing high power surface waves
We demonstrate a concept of a nonlinear metamaterial that provides power dependent absorption of incident surface waves. The metasurface includes nonlinear circuits which transform it from a low loss to high loss state when illuminated with high power waves. The proposed surface allows low power signals to propagate but strongly absorbs high power signals. It can potentially be used on enclosures for electric devices to protest against damage. We experimentally verify that the nonlinear metasurface has two distinct states controlled by the incoming signal power. We also demonstrate that it inhibits the propagation of large signals and dramatically decreases the field that is leaked through an opening in a conductive enclosure
Cosmogenic ^(10)Be and ^(36)Cl geochronology of offset alluvial fans along the northern Death Valley fault zone: Implications for transient strain in the eastern California shear zone
The northern Death Valley fault zone (NDVFZ) has long been recognized as a major right-lateral strike-slip fault in the eastern California shear zone (ECSZ). However, its geologic slip rate has been difficult to determine. Using high-resolution digital topographic imagery and terrestrial cosmogenic nuclide dating, we present the first geochronologically determined slip rate for the NDVFZ. Our study focuses on the Red Wall Canyon alluvial fan, which exposes clean dextral offsets of seven channels. Analysis of airborne laser swath mapping data indicates ∼297 ± 9 m of right-lateral displacement on the fault system since the late Pleistocene. In situ terrestrial cosmogenic ^(10)Be and ^(36)Cl geochronology was used to date the Red Wall Canyon fan and a second, correlative fan also cut by the fault. Beryllium 10 dates from large cobbles and boulders provide a maximum age of 70 +22/−20 ka for the offset landforms. The minimum age of the alluvial fan deposits based on ^(36)Cl depth profiles is 63 ± 8 ka. Combining the offset measurement with the cosmogenic ^(10)Be date yields a geologic fault slip rate of 4.2 +1.9/−1.1 mm yr^(−1), whereas the ^(36)Cl data indicate 4.7 +0.9/−0.6 mm yr^(−1) of slip. Summing these slip rates with known rates on the Owens Valley, Hunter Mountain, and Stateline faults at similar latitudes suggests a total geologic slip rate across the northern ECSZ of ∼8.5 to 10 mm yr^(−1). This rate is commensurate with the overall geodetic rate and implies that the apparent discrepancy between geologic and geodetic data observed in the Mojave section of the ECSZ does not extend north of the Garlock fault. Although the overall geodetic rates are similar, the best estimates based on geology predict higher strain rates in the eastern part of the ECSZ than to the west, whereas the observed geodetic strain is relatively constant
- …