41 research outputs found
Detecting Eccentricity and Demagnetization Fault of Permanent Magnet Synchronous Generators in Transient State
Author's accepted manuscript© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.acceptedVersio
Four-Level Three-Phase Inverter With Reduced Component Count for Low and Medium Voltage Applications
publishedVersio
Improved Quadratic Time-frequency Distributions for Detecting Inter-turn Short Circuits of PMSMs in Transient States
Author's accepted manuscript.© 2020 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.acceptedVersio
Modelling Demagnetized Permanent Magnet Synchronous Generators using Permeance Network Model with Variable Flux Sources
Author's accepted manuscript© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.acceptedVersio
RMS Based Health Indicators for Remaining Useful Lifetime Estimation of Bearings
Estimating the remaining useful life (RUL) of bearings from healthy to faulty is important for predictive maintenance. The bearing fault severity can be estimated based on the energy or root mean square (RMS) of vibration signals, and a stopping criterion can be set based on a threshold given by an ISO standard. However, the vibration RMS is often not monotonically increasing with damage, which renders a challenge for predicting the RUL. This study proposes a novel method for splitting the vibration signal into multiple frequency bands before RMS calculations to generate multiple health indicators. Monotonic health indicators are identified using the Spearman coefficient, and the RUL is afterward estimated for each indicator using a suitable model and parameter update scheme. Historical failure data is not required to set any parameters. The proposed method is tested with the Paris' law, where parameters are updated by particle filters. Experimental results from two test rigs validate the performance of the proposed method.publishedVersio
Vehicle crashworthiness performance in frontal impact: Mathematical model using elastic pendulum
Vehicle occupant injuries due to collisions cause many fatalities every year. Safe vehicle design plays a critical role in averting serious injuries to occupants and vulnerable road users in the event of a crash. In this paper we study a full frontal vehicle crash against a rigid barrier introducing a Lumped Parameter Model (LPM) inspired by the elastic pendulum motion. The model uses polar coordinates to simplify the problem and the governing equations have been defined using Lagrangian formulation. The Simulink model has been validated against Finite Element (FE) data demonstrating good correlation with pitching angle and maximum crush of the vehicle. These parameters are crucial for designing vehicles which efficiently protect occupants.publishedVersionPaid Open Acces
Crash Response of a Repaired Vehicle-Influence of Welding UHSS Members
Author's accepted manuscriptAutomakers generally recommend not to weld structural parts after a vehicle crash, and these should be replaced as a whole part in case of a crash event. Sectioning of these members is also not recommended and use of the repair manual is mandatory in case of fracture of such parts. However, repair shops may not adhere to these instructions and use incorrect repair procedures on these members which would modify their strength properties. This study analyses the impact of welding structural members in a vehicle like the A-pillar which use Ultra-High Strength Steels (UHSS) for reducing the weight of the vehicle and improving the crashworthiness of the structure. The research conducted in this paper highlights the differences in the crash performance of a repaired vehicle as opposed to baseline injury values for the vehicle. The performance of the modified vehicle when tested for different loadcases shows reduced crash performance as compared to the baseline performance and it can be concluded that welding or sectioning the UHSS parts would influence the crashworthiness of a vehicle. This paper only focuses on structural integrity of the repaired vehicle in a crash event. The performance of the vehicle in occupant injury is kept out of scope for this study.acceptedVersio
Modeling of Modified Vehicle Crashworthiness using a Double Compound Pendulum
Vehicle crash modeling has been a challenge for researchers for several decades. Occupant injury prevention and prediction is a critical area within vehicle safety design. The modeling of material failure in structural members during a full frontal crash has been presented in this paper. This study presents a Lumped Parameter Model (LPM) with an elastic double compound pendulum replicating the impact kinematics. The model defined using Lagrangian formulation; presents a novel methodology to represent material fracture caused due to heat affected zones or welding in Ultra High Strength Steels (UHSS) in a non-linear crash event. The material fracture leads to rotation of the vehicle; presented in the form of torsional springs in the LPM developed in this study. The Simulink model has been validated with a finite element simulation and shows good correlation to predict parameters crucial to design for occupant protection in a vehicle crash.publishedVersio
Vehicle Accident Databases: Correctness Checks for Accident Kinematic Data
(1) Background: Data collection procedures allow to obtain harmonization of in-depth road accident databases. Plausibility of calculable accident-related kinematic parameters depends on the constraints imposed on calculation, making their uncertainty degree higher than the one for measurable parameters (i.e., traces, airbag activation, etc.). Uncertainty translates in information loss, making the statistics based on databases analysis less consistent. Since kinematic parameters describe the global accident dynamics, their correctness assessment has a fundamental importance; (2) Methods: the paper takes as reference data collected in the Initiative for the GLobal harmonisation of Accident Data (IGLAD) database for vehicle-to-vehicle crashes. The procedure, however, has general nature and applies identically for other databases and multiple impacts between vehicles. To highlight issues which can arise in accident-related data collection, 3 different checks are proposed for parameters correctness assessment; (3) Results: by 4 examples, 1 with correct and 3 with incorrect parameters reported, the paper demonstrates that errors can go beyond simple calculation uncertainty, implying that a deeper analysis is desirable in data collection; (4) Conclusions: the step-by-step guidelines described in this paper will help in increasing goodness of collected data, providing for a methodology which can be used by each individual involved in accident data collection, both for collection itself and subsequent verification analysis