47 research outputs found
An All-Optical General-Purpose CPU and Optical Computer Architecture
Energy efficiency of electronic digital processors is primarily limited by
the energy consumption of electronic communication and interconnects. The
industry is almost unanimously pushing towards replacing both long-haul, as
well as local chip interconnects, using optics to drastically increase
efficiency. In this paper, we explore what comes after the successful migration
to optical interconnects, as with this inefficiency solved, the main source of
energy consumption will be electronic digital computing, memory and
electro-optical conversion. Our approach attempts to address all these issues
by introducing efficient all-optical digital computing and memory, which in
turn eliminates the need for electro-optical conversions. Here, we demonstrate
for the first time a scheme to enable general purpose digital data processing
in an integrated form and present our photonic integrated circuit (PIC)
implementation. For this demonstration we implemented a URISC architecture
capable of running any classical piece of software all-optically and present a
comprehensive architectural framework for all-optical computing to go beyond.Comment: 14 pages, 10 figure
Insight into the template effect of vesicles on the laccase-catalyzed oligomerization of N-phenyl-1,4-phenylenediamine from Raman spectroscopy and cyclic voltammetry measurements
We report about the first Raman spectroscopy study of a vesicle-assisted enzyme-catalyzed oligomerization reaction. The aniline dimer N-phenyl-1,4-phenylenediamine (=p-aminodiphenylamine, PADPA) was oxidized and oligomerized with Trametes versicolor laccase and dissolved O-2 in the presence of sodium bis(2-ethylhexyl) sulfosuccinate (AOT) vesicles (80-100 nm diameter) as templates. The conversion of PADPA into oligomeric products, poly(PADPA), was monitored during the reaction by in situ Raman spectroscopy. The results obtained are compared with UV/vis/NIR and EPR measurements. All three complementary methods indicate that at least some of the poly(PADPA) products, formed in the presence of AOT vesicles, resemble the conductive emeraldine salt form of polyaniline (PANI-ES). The Raman measurements also show that structural units different from those of "ordinary" PANI-ES are present too. Without vesicles PANI-ES-like products are not obtained. For the first time, the as-prepared stable poly(PADPA)-AOT vesicle suspension was used directly to coat electrodes (without product isolation) for investigating redox activities of poly(PADPA) by cyclic voltammetry (CV). CV showed that poly(PADPA) produced with vesicles is redox active not only at pH 1.1-as expected for PANI-ES-but also at pH 6.0, unlike PANI-ES and poly(PADPA) synthesized without vesicles. This extended pH range of the redox activity of poly(PADPA) is important for applications
Effect of Template Type on the Trametes versicolor Laccase-Catalyzed Oligomerization of the Aniline Dimer p-Aminodiphenylamine (PADPA)
Many previous studies have shown that (i) the oxidation of aniline or the aniline dimer p-aminodiphenyl-amine (PADPA) in a slightly acidic aqueous solution can be catalyzed with heme peroxidases or multicopper laccases and that (ii) subsequent reactions lead to oligomeric or polymeric products, which resemble chemically synthesized polyaniline in its conductive emeraldine salt form (PANI-ES), provided that (iii) an anionic "template" is present in the reaction medium. Good templates are anionic polyelectrolytes, micelles, or vesicles. Under optimal conditions, their presence directs the reactions in a positive way toward the desired formation of PANI-ES-type products. The effect of four different types of anionic templates on the formation of PANI-ES-like products from PADPA was investigated and compared by using Trametes versicolor laccase (TvL) as a catalyst in an aqueous pH 3.5 solution at room temperature. All four templates contain sulfonate groups: the sodium salt of the polyelectrolyte sulfonated polystyrene (SPS), micelles from sodium dodecylbenzenesulfonate (SDBS), vesicles from a 1:1 molar mixture of SDBS and decanoic acid, and vesicles from sodium bis(2-ethylhexyl) sulfosuccinate (AOT). Although with all four templates, stable, inkjet-printable solutions or suspensions consisting of PANI-ES-type products were obtained under optimized conditions, considerably higher amounts of TvL were required with SDBS micelles to achieve comparable monomer conversion to PANI-ES-like products during the same time period when compared to those with SPS or the two types of vesicles. This makes SDBS micelles less attractive as templates for the investigated reaction. In situ UV/vis/near-infrared, electron paramagnetic resonance (EPR), and Raman spectroscopy measurements in combination with an high-performance liquid chromatography analysis of extracted reaction products, which were deprotonated and chemically reduced, showed seemingly small but significant differences in the composition of the mixtures obtained when reaching reaction equilibrium after 24 h. With the two vesicle systems, the content of unwanted substituted phenazine units was lower than in the case of SPS polyelectrolyte and SDBS micelles. The EPR spectra indicate a more localized, narrower distribution of electronic states of the paramagnetic centers of the PANI-ES-type products synthesized in the presence of the two vesicle systems when compared to that of the similar products obtained with the SPS polyelectrolyte and SDBS micelles as templates. Overall, the data obtained from the different complementary methods indicate that with the two vesicle systems structurally more uniform (regular) PANI-ES-type products formed. Among the two investigated vesicle systems, for the investigated reaction (oxidation of PADPA with TvL and O-2), AOT appears a somewhat better choice as it leads to a higher content of the PANI-ES polaron form
How experimental details matter. The case of a laccase-catalysed oligomerisation reaction
The Trametes versicolor laccase (TvL)-catalysed oligomerisation of the aniline dimer p-aminodiphenylamine (PADPA) was investigated in an aqueous medium of pH = 3.5, containing 80-100 nm-sized anionic vesicles formed from AOT, the sodium salt of bis(2-ethylhexyl)sulfosuccinic acid. If run under optimal conditions, the reaction yields oligomeric products which resemble the emeraldine salt form of polyaniline (PANI-ES) in its polaron state, known to be the only oxidation state of linear PANI which is electrically conductive. The vesicles serve as "templates" for obtaining products with the desired PANI-ES-like features. For this complex, heterogeneous, vesicle-assisted, and enzyme-mediated reaction, in which dissolved dioxygen also takes part as a re-oxidant for TvL, small changes in the composition of the reaction mixture can have significant effects. Initial conditions may not only affect the kinetics of the reaction, but also the outcome, i.e., the product distribution once the reaction reaches its equilibrium state. While a change in the reaction temperature from T approximate to 25 to 5 degrees C mainly influenced the rate of reaction, increase in enzyme concentration and the presence of millimolar concentrations of chloride ions were found to have significant undesired effects on the outcome of the reaction. Chloride ions, which may originate from the preparation of the pH = 3.5 solution, inhibit TvL, such that higher TvL concentrations are required than without chloride to yield the same product distribution for the same reaction runtime as in the absence of chloride. With TvL concentrations much higher than the elaborated value, the products obtained clearly were different and over-oxidised. Thus, a change in the activity of the enzyme was found to have influence not only on kinetics but also led to a change in the final product distribution, molecular structure and electrical properties, which was a surprising find. The complementary analytical methods which we used in this work were in situ UV/vis/NIR, EPR, and Raman spectroscopy measurements, in combination with a detailed ex situ HPLC analysis and molecular dynamics simulations. With the results obtained, we would like to recall the often neglected or ignored fact that it is important to describe and pay attention to the experimental details, since this matters for being able to perform experiments in a reproducible way
Application of an enzymatic cascade reaction for the synthesis of the emeraldine salt form of polyaniline
The synthesis of the emeraldine salt form of polyaniline (PANI-ES) from aniline with Aspergillus sp. glucose oxidase (GOD), d-glucose, dissolved O2, and horseradish peroxidase isoenzyme C (HRPC) in the presence of large unilamellar vesicles of AOT (sodium bis-(2-ethylhexyl)sulfosuccinate) as templates at pH = 4.3 and T ~ 25 °C was investigated in a systematic way. In this cascade reaction mixture, the oxidation of aniline is catalyzed by HRPC with H2O2 that is formed in situ as byproduct of the GOD-catalyzed oxidation of d-glucose with O2. Under the elaborated experimental conditions which we considered ideal, the formation of PANI-ES products is evident, as judged by UV/Vis/NIR and EPR measurements. Comparison was made with a reference reaction, which was run under similar conditions with added H2O2 instead of GOD and d-glucose. Although the reference reaction was found to be superior, with the cascade reaction, PANI-ES products can still be obtained with high aniline conversion (> 90%) within 24 h as stable dark green PANI-ES/AOT vesicle dispersion. Our results show that the in situ formation of H2O2 does not prevent the inactivation of HRPC known to occur in the reference reaction. Moreover, the GOD used in the cascade reaction is inactivated as well by polymerization intermediates.ISSN:0366-6352ISSN:1336-9075ISSN:2585-729
Application of an enzymatic cascade reaction for the synthesis of the emeraldine salt form of polyaniline
AbstractThe synthesis of the emeraldine salt form of polyaniline (PANI-ES) from aniline with Aspergillus sp. glucose oxidase (GOD), d-glucose, dissolved O2, and horseradish peroxidase isoenzyme C (HRPC) in the presence of large unilamellar vesicles of AOT (sodium bis-(2-ethylhexyl)sulfosuccinate) as templates at pH = 4.3 and T ~ 25 °C was investigated in a systematic way. In this cascade reaction mixture, the oxidation of aniline is catalyzed by HRPC with H2O2 that is formed in situ as byproduct of the GOD-catalyzed oxidation of d-glucose with O2. Under the elaborated experimental conditions which we considered ideal, the formation of PANI-ES products is evident, as judged by UV/Vis/NIR and EPR measurements. Comparison was made with a reference reaction, which was run under similar conditions with added H2O2 instead of GOD and d-glucose. Although the reference reaction was found to be superior, with the cascade reaction, PANI-ES products can still be obtained with high aniline conversion (> 90%) within 24 h as stable dark green PANI-ES/AOT vesicle dispersion. Our results show that the in situ formation of H2O2 does not prevent the inactivation of HRPC known to occur in the reference reaction. Moreover, the GOD used in the cascade reaction is inactivated as well by polymerization intermediates.</jats:p
Hemin-catalyzed oxidative oligomerization of <i>p</i>-aminodiphenylamine (PADPA) in the presence of aqueous sodium dodecylbenzenesulfonate (SDBS) micelles
Polyaniline emeraldine salt-type products were synthesized under mild, environmentally friendly conditions using hemin as a cost-effective catalyst, p-aminodiphenylamine (PADPA) as a monomer, and micelles formed from SDBS as templates.</jats:p
