3D Magnetic Analysis of the CMS Magnet

The CMS magnetic system consists of a super-conducting solenoid coil, 12.5 m long and 6 m free bore diameter, and of an iron flux-return yoke, which includes the central barrel, two end-caps and the ferromagnetic parts of the hadronic forward calorimeter. The magnetic flux density in the center of the solenoid is 4 T. To carry out the magnetic analysis of the CMS magnetic system, several 3D models were developed to perform magnetic field and force calculations using the Vector Fields code TOSCA. The analysis includes a study of the general field behavior, the calculation of the forces on the coil generated by small axial, radial displacements and angular tilts, the calculation of the forces on the ferromagnetic parts, the calculation of the fringe field outside the magnetic system, and a study of the field level in the chimneys for the current leads and the cryogenic lines. A procedure to reconstruct the field inside a cylindrical volume starting from the values of the magnetic flux density on the cylinder surface is considered. Special TOSCA-GEANT interface tools have being developed to input the calculated magnetic field into the detector simulation package.Comment: 4 pages, 6 figures, 1 equation, 14 reference

On the Difference Between Social and Private Good

AbstractStandard economic models have long been applied to choices over private consumption goods, but have recently been extended to incorporate social situations as well. We challenge the applicability of standard decision-theoretic models to social settings. In an experiment where choices affect the payoffs of someone else, we find that a large fraction of subjects prefer randomization over any of the deterministic outcomes. This tendency prevails whether the other party knows about the choice situation or not. Such randomization violates standard decision theory axioms that require that lotteries are never better than their best deterministic component. For conceptually similar choices in classical non-social situations, we do not find much evidence for such violations, suggesting the need for theories of uncertainty that are targeted to social settings.</jats:p

Mechanical characteristics of the hypereutectic silumin processed by ionelectron-plasma modification

In this paper, the possibility of modifying the surface of a hypereutectic silumin (Al-(18-24) wt.%Si) is shown. Modification of the samples was carried out in two stages. At the first stage, a "film (Zr-5% Ti-5% Cu) / (Al- (18-24) wt.% Si) film system was formed by an ion-plasma method with an arc-sputtering of a Zr-5% Ti-5 cathode % Cu in the "TRIO" installation (IHCE SB RAS). In the second stage, the surface layer of the silumin of the hypereutectic composition was doped by melting the "film-substrate" system with an intense pulsed electron beam at the "SOLO" installation

Chiral photoelectron angular distributions from ionization of achiral atomic and molecular species

We show that the combination of two achiral components - atomic or molecular target plus a circularly polarized photon - can yield chirally structured photoelectron angular distributions. For photoionization of CO, the angular distribution of carbon K-shell photoelectrons is chiral when the molecular axis is neither perpendicular nor (anti-)parallel to the light propagation axis. In photo-double-ionization of He, the distribution of one electron is chiral, if the other electron is oriented like the molecular axis in the former case and if the electrons are distinguishable by their energy. In both scenarios, the circularly polarized photon defines a plane with a sense of rotation and an additional axis is defined by the CO molecule or one electron. This is sufficient to establish an unambiguous coordinate frame of well-defined handedness. To produce a chirally structured electron angular distribution, such a coordinate frame is necessary, but not sufficient. We show that additional electron-electron interaction or scattering processes are needed to create the chiral angular distribution

Evaluation of motor transport drivers professional suitability using road traffic simulator

The article considers a method that allows to determine the degree of development of professionally important qualities of motor vehicle drivers on the basis of the developed hardware-software complex of traffic simulation. The technique of convolution of the test results on the auto-simulator and on the complex of psychological tests "Effecton" is developed. The proposed approach allows to determine the degree of correlation between the results of the developed simulation tests and existing universal psychological tests

Cytotoxic diterpenoids from Salvia glutinosa and comparison with the tanshinone profile of danshen (Salvia miltiorrhiza)

The roots of Salvia miltiorrhiza are the source of the traditional Chinese medicine danshen and the class of tanshinones, particular quinoid nor-diterpenoids of the abietane type. Of these compounds, cryptotanshinone, dihydrotanshinone I, tanshinone I, and tanshinone IIA, have been extensively studied for their anticancer potential, not only but as well because of their high abundance in S. miltiorrhiza and their thus easy availability. However, also additional Salvia species are known to contain tanshinones, mainly such of the subgenus Glutinaria, of which S. glutinosa is the only species widely occurring in Europe. Using UHPLC-DAD-MS, the tanshinone profile of S. glutinosa roots collected from two different locations was compared to the profile in S. miltiorrhiza roots. In addition, tanshinone IIA and another six diterpenoids from S. glutinosa were investigated for their antiproliferative and cytotoxic potential against MDA-MB-231 and HL-60 cells. Apart from dihydrotanshinone I, which has been previously characterized due to its anticancer properties, we determined danshenol A as a highly antiproliferative and cytotoxic agent, significantly surpassing the effects of dihydrotanshinone I. With regard to the diterpenoid profile, S. miltiorrhiza showed a higher concentration for most of the tanshinones, except for (+)-danshexinkun A, which was present in comparable amounts in both species. Danshenol A, in contrast, was only present in S. glutinosa as were dehydroabietic acid and (+)-pisiferic acid. The results of our study underlines the long traditional use of danshen due to its high amount on tanshinones, but also demonstrates the potential value of investigating closely related species for the discovery of new biologically active lead compounds

Anisotropic optical properties of single-crystal GdBa2Cu3O7-delta

The optical spectrum of reduced-T(c) GdBa2Cu3O7-delta has been measured for polarizations parallel and perpendicular to the ab plane. The sample was an oxygen-deficient single crystal with a large face containing the c axis. The polarized reflectance from this face was measured from 20-300 K in the spectral region from 30-3000 cm-1, with 300 K data to 30 000 cm-1. Kramers-Kronig analysis was used to determine the spectral dependence of the ab and the c components of the dielectric tensor. The optical properties are strongly anisotropic. The ab-plane response resembles that of other reduced-T(c) materials whereas the c axis, in contrast, shows only the presence of several phonons. There is a complete absence of charge carrier response along c above and below T(c). This observation allows us to set an upper limit to the free-carrier spectral weight for transport perpendicular to the CuO2 planes