993 research outputs found
Development of ultra-pure NaI(Tl) detectors for the COSINE-200 experiment
The annual modulation signal observed by the DAMA experiment is a
long-standing question in the community of dark matter direct detection. This
necessitates an independent verification of its existence using the same
detection technique. The COSINE-100 experiment has been operating with 106~kg
of low-background NaI(Tl) detectors providing interesting checks on the DAMA
signal. However, due to higher backgrounds in the NaI(Tl) crystals used in
COSINE-100 relative to those used for DAMA, it was difficult to reach final
conclusions. Since the start of COSINE-100 data taking in 2016, we also have
initiated a program to develop ultra-pure NaI(Tl) crystals for COSINE-200, the
next phase of the experiment. The program includes efforts of raw powder
purification, ultra-pure NaI(Tl) crystal growth, and detector assembly
techniques. After extensive research and development of NaI(Tl) crystal growth,
we have successfully grown a few small-size (0.610.78 kg) thallium-doped
crystals with high radio-purity. A high light yield has been achieved by
improvements of our detector assembly technique. Here we report the ultra-pure
NaI(Tl) detector developments at the Institute for Basic Science, Korea. The
technique developed here will be applied to the production of NaI(Tl) detectors
for the COSINE-200 experiment.Comment: 12 pages, 12 figure
Development of an Integrated DBH Estimation Model Based on Stand and Climatic Conditions
Using Korean National Forest Inventory (NFI) data, our study developed a model to estimate stand mean diameter at breast height (DBH) reflecting the influence of site and climate factors on forest growth for the major tree species in South Korea. A DBH estimation model was developed using stand-level variables (stand age, site index and number of trees per hectare) as independent factors. The spatial autocorrelation of residuals of the model was identified using semi-variogram analysis for each tree species. Further, a residual model, in which residuals were estimated by climatic factors (mean temperature, sum temperature in the growing season and precipitation), was developed assuming that the spatial autocorrelation of residuals reflects the differences in regional climatic conditions. Linear regression analysis showed that residuals of all tree species were significantly correlated with temperature and precipitation. The DBH and residual models were integrated to estimate the current DBH under different climatic factors (temperature and precipitation) and stand-level variables. This model had high reliability (R2 = 0.74–0.79), and no obvious dependencies or patterns in residuals were noted. Our results indicated that temperature increases caused by climate change would negatively affect the DBH estimate of coniferous trees, but not of oak species
First Results from the AMoRE-Pilot neutrinoless double beta decay experiment
The Advanced Molybdenum-based Rare process Experiment (AMoRE) aims to search
for neutrinoless double beta decay (0) of Mo with
100 kg of Mo-enriched molybdenum embedded in cryogenic detectors
with a dual heat and light readout. At the current, pilot stage of the AMoRE
project we employ six calcium molybdate crystals with a total mass of 1.9 kg,
produced from Ca-depleted calcium and Mo-enriched molybdenum
(CaMoO). The simultaneous detection of
heat(phonon) and scintillation (photon) signals is realized with high
resolution metallic magnetic calorimeter sensors that operate at milli-Kelvin
temperatures. This stage of the project is carried out in the Yangyang
underground laboratory at a depth of 700 m. We report first results from the
AMoRE-Pilot search with a 111 kgd live exposure of
CaMoO crystals. No evidence for
decay of Mo is found, and a upper limit is set for the
half-life of 0 of Mo of y at 90% C.L.. This limit corresponds to an effective
Majorana neutrino mass limit in the range eV
Alpha backgrounds in NaI(Tl) crystals of COSINE-100
COSINE-100 is a dark matter direct detection experiment with 106 kg NaI(Tl)
as the target material. 210Pb and daughter isotopes are a dominant background
in the WIMP region of interest and are detected via beta decay and alpha decay.
Analysis of the alpha channel complements the background model as observed in
the beta/gamma channel. We present the measurement of the quenching factors and
Monte Carlo simulation results and activity quantification of the alpha decay
components of the COSINE-100 NaI(Tl) crystals. The data strongly indicate that
the alpha decays probabilistically undergo two possible quenching factors but
require further investigation. The fitted results are consistent with
independent measurements and improve the overall understanding of the
COSINE-100 backgrounds. Furthermore, the half-life of 216Po has been measured
to be 143.4 +/- 1.2 ms, which is consistent with and more precise than recent
measurements
Background study of the AMoRE-pilot experiment
We report a study on the background of the Advanced Molybdenum-Based Rare
process Experiment (AMoRE), a search for neutrinoless double beta decay (\znbb)
of Mo. The pilot stage of the experiment was conducted using 1.9
kg of \CAMOO~ crystals at the Yangyang Underground Laboratory, South Korea,
from 2015 to 2018. We compared the measured energy spectra in
three experimental configurations with the results of Monte Carlo simulations
and identified the background sources in each configuration. We replaced
several detector components and enhanced the neutron shielding to lower the
background level between configurations. A limit on the half-life of
decay of Mo was found at years at 90\% confidence level, based on the measured background and
its modeling. Further reduction of the background rate in the AMoRE-I and
AMoRE-II are discussed
Nonproportionality of NaI(Tl) scintillation detector for dark matter search experiments
We present a comprehensive study of the nonproportionality of NaI(Tl) scintillation detectors within the context of dark matter search experiments. Our investigation, which integrates COSINE-100 data with supplementary γ spectroscopy, measures light yields across diverse energy levels from full-energy γ peaks produced by the decays of various isotopes. These γ peaks of interest were produced by decays supported by both long and short-lived isotopes. Analyzing peaks from decays supported only by short-lived isotopes presented a unique challenge due to their limited statistics and overlapping energies, which was overcome by a e-mail: [email protected] b e-mail: [email protected] (corresponding author) long-term data collection and a time-dependent analysis. A key achievement is the direct measurement of the 0.87 keV light yield, resulting from the cascade following electron capture decay of 22Na from internal contamination. This measurement, previously accessible only indirectly, deepens our understanding of NaI(Tl) scintillator behavior in the region of interest for dark matter searches. This study holds substantial implications for background modeling and the interpretation of dark matter signals in NaI(Tl) experiments
Radioassay of the materials for AMoRE-II experiment
The AMoRE-II experiment will search for the 0νββ decay of 100Mo nuclei using molybdate crystal scintillators, operating at milli-Kelvin (mK) temperatures, with a total of 80 kg of 100Mo. The background goal for the experiment is 10–4 counts/keV/kg/year in the region of interest around the 0νββ decay Q-value of 3,034 keV. To achieve this level, the rate of background signals arising from emissions produced by decays of radioactive impurities in the detector and shielding materials must be strictly controlled. To do this, concentrations of such impurities are measured and are controlled through materials selection and purification. In this paper, we describe the design and the construction materials used to build the AMoRE-II detector and shielding system, including active and passive shielding, the cryostat, and the detector holders and instrumentation, and we report on measurements of radioactive impurities within candidate and selected materials
A Phenome-Based Functional Analysis of Transcription Factors in the Cereal Head Blight Fungus, Fusarium graminearum
Fusarium graminearum is an important plant pathogen that causes head blight of major cereal crops. The fungus produces mycotoxins that are harmful to animal and human. In this study, a systematic analysis of 17 phenotypes of the mutants in 657 Fusarium graminearum genes encoding putative transcription factors (TFs) resulted in a database of over 11,000 phenotypes (phenome). This database provides comprehensive insights into how this cereal pathogen of global significance regulates traits important for growth, development, stress response, pathogenesis, and toxin production and how transcriptional regulations of these traits are interconnected. In-depth analysis of TFs involved in sexual development revealed that mutations causing defects in perithecia development frequently affect multiple other phenotypes, and the TFs associated with sexual development tend to be highly conserved in the fungal kingdom. Besides providing many new insights into understanding the function of F. graminearum TFs, this mutant library and phenome will be a valuable resource for characterizing the gene expression network in this fungus and serve as a reference for studying how different fungi have evolved to control various cellular processes at the transcriptional level
- …