448 research outputs found
Recommended from our members
Cost-Effectiveness of Vaccination versus Treatment of Influenza in Healthy Adolescents and Adults
At present time, there is uncertainty regarding whether influenza-like illness in healthy adults is best managed by preventive efforts that use the trivalent influenza vaccine, administration of neuraminidase inhibitors at the onset of illness, or recommendation of supportive care alone at the onset of illness. We conducted a cost-effectiveness analysis that examined these 3 strategies for managing influenza-like illness. Vaccination with inactivated trivalent vaccine would save approximately 27,619 per quality-adjusted life-year gained relative to providing supportive care. Vaccination is cost-saving relative to providing either treatment with oseltamivir or providing supportive care alone
Analytical and numerical assessment of the effect of highly conductive inclusions distribution on the thermal conductivity of particulate composites
Highly conductive composites have found applications in thermal management, and the effective thermal conductivity plays a vital role in understanding the thermo-mechanical behavior of advanced composites. Experimental studies show that when highly conductive inclusions embedded in a polymeric matrix the particle forms conductive chain that drastically increase the effective thermal conductivity of two-phase particulate composites. In this study, we introduce a random network three dimensional (3D) percolation model which closely represent the experimentally observed scenario of the formation of the conductive chain by spherical particles. The prediction of the effective thermal conductivity obtained from percolation models is compared with the conventional micromechanical models of particulate composites having the cubical arrangement, the hexagonal arrangement and the random distribution of the spheres. In addition to that, the capabilities of predicting the effective thermal conductivity of a composite by different analytical models, micromechanical models, and, numerical models are also discussed and compared with the experimental data available in the literature. The results showed that random network percolation models give reasonable estimates of the effective thermal conductivity of the highly conductive particulate composites only in some cases. It is found that the developed percolation models perfectly represent the case of conduction through a composite containing randomly suspended interacting spheres and yield effective thermal conductivity results close to Jeffery's model. It is concluded that a more refined random network percolation model with the directional conductive chain of spheres should be developed to predict the effective thermal conductivity of advanced composites containing highly conductive inclusions
The role of dynamic response parameters in damage prediction
This article presents a literature review of published methods for damage identification and prediction in mechanical structures. It discusses ways which can identify and predict structural damage from dynamic response parameters such as natural frequencies, mode shapes, and vibration amplitudes. There are many structural applications in which dynamic loads are coupled with thermal loads. Hence, a review on those methods, which have discussed structural damage under coupled loads, is also presented. Structural health monitoring with other techniques such as elastic wave propagation, wavelet transform, modal parameter, and artificial intelligence are also discussed. The published research is critically analyzed and the role of dynamic response parameters in structural health monitoring is discussed. The conclusion highlights the research gaps and future research direction
Instant dynamic response measurements for crack monitoring in metallic beams
This paper investigates the interdependencies of the modal behaviour of a cantilever beam, its dynamic response and crack growth. A methodology is proposed that can predict crack growth in a metallic beam using only its dynamic response. Analytical and numerical relationships are formulated between the fundamental mode and crack growth using the existing literature and finite element analysis (FEA) software, respectively. A relationship between the dynamic response and the modal behaviour is formulated empirically. All three relationships are used to predict crack growth and propagation. The load conditions are considered the same in all of the experiments for both model development and model validation. The predicted crack growth is compared with the visual observations. The overall error is within acceptable limits in all comparisons. The results obtained demonstrate the possibility of diagnosing crack growth in metallic beams at any instant within the operational conditions and environment
Response of Gaussian-modulated guided wave in aluminum: An analytical, numerical, and experimental study
The application of guided-wave ultrasonic testing in structural health monitoring has been widely accepted. Comprehensive experimental works have been performed in the past but their validation with possible analytical and numerical solutions still requires serious efforts. In this paper, behavior and detection of the Gaussian-modulated sinusoidal guided-wave pulse traveling in an aluminum plate are presented. An analytical solution is derived for sensing guided wave at a given distance from the actuator. This solution can predict the primary wave modes separately. Numerical analysis is also carried out in COMSOL® Multiphysics software. An experimental setup comprising piezoelectric transducers is used for the validation. Comparison of experimental results with those obtained from analytical and numerical solutions shows close agreement
Characterizing modal behavior of a cantilever beam at different heating rates for isothermal conditions
The effect of temperature on structural response is a concern in engineering applications. The literature has highlighted that applied temperature loads change the system vibration behaviour. However, there is limited information available about temperature impacting the dynamic response. This paper investigated the heating rates effects on modal parameters for both with crack and without crack conditions in a cantilever beam. A beam subjected to three heating rates was considered: 2, 5, and 8 °C/min. The first one was assumed as a slow heating rate while the others were assumed as moderate and high, respectively. This controlled rate of heating was achieved by using a proportional-integral-derivative (PID) temperature controller. The results showed that heating at different rates has little impact on modal parameters. While this effect is minimal at lower temperatures and more evident at higher temperatures. The results of temperature ramped at 2, 5, and 8 °C/min were compared with the numerical and analytical results only for all the isothermal conditions. It was observed that the beam natural frequency and its modal amplitude decrease with the increase in temperatures and crack depths. Therefore, it is concluded that the rate of heating can make a slight impact on the dynamics response of any mechanical system
A methodology for flexibility analysis of pipeline systems
Pipeline systems serve a crucial role in an effective transport of fluids to the designated location for medium to long span of distances. Owing to its paramount economic significance, pipeline design field have undergone extensive development over the past few years for enhancing the optimization and transport efficiency. This research paper attempts to propose a methodology for flexibility analysis of pipeline systems through employing contemporary computational tools and practices. A methodical procedure is developed, which involves modeling of the selected pipeline system in CAESAR II followed by the insertion of pipe supports and restraints. The specific location and selection of the inserted supports is based on the results derived from the displacement, stress, reaction, and nozzle analysis of the concerned pipeline system. Emphasis is laid on the compliance of the design features to the leading code of pipeline transportation systems for liquid and slurries, ASME B31.4. The discussed procedure and approach can be successfully adjusted for the analysis of various other types of pipeline system configuration. In addition to the provision of systematic flow in analysis, the method also improves efficient time-saving practices in the pipeline stress analysis
A methodological framework for assessing agreement between cost-effectiveness outcomes estimated using alternative sources of data on treatment costs and effects for trial-based economic evaluations
A new methodological framework for assessing agreement between cost-effectiveness endpoints generated using alternative sources of data on treatment costs and effects for trial-based economic evaluations is proposed. The framework can be used to validate cost-effectiveness endpoints generated from routine data sources when comparable data is available directly from trial case report forms or from another source. We illustrate application of the framework using data from a recent trial-based economic evaluation of the probiotic Bifidobacterium breve strain BBG administered to babies less than 31 weeks of gestation. Cost-effectiveness endpoints are compared using two sources of information; trial case report forms and data extracted from the National Neonatal Research Database (NNRD), a clinical database created through collaborative efforts of UK neonatal services. Focusing on mean incremental net benefits at £30,000 per episode of sepsis averted, the study revealed no evidence of discrepancy between the data sources (two-sided p values >0.4), low probability estimates of miscoverage (ranging from 0.039 to 0.060) and concordance correlation coefficients greater than 0.86. We conclude that the NNRD could potentially serve as a reliable source of data for future trial-based economic evaluations of neonatal interventions. We also discuss the potential implications of increasing opportunity to utilize routinely available data for the conduct of trial-based economic evaluations
In-situ dynamic response measurement for damage quantification of 3D printed ABS cantilever beam under thermomechanical load
Acrylonitrile butadiene styrene (ABS) offers good mechanical properties and is effective in use to make polymeric structures for industrial applications. It is one of the most common raw material used for printing structures with fused deposition modeling (FDM). However, most of its properties and behavior are known under quasi-static loading conditions. These are suitable to design ABS structures for applications that are operated under static or dead loads. Still, comprehensive research is required to determine the properties and behavior of ABS structures under dynamic loads, especially in the presence of temperature more than the ambient. The presented research was an effort mainly to provide any evidence about the structural behavior and damage resistance of ABS material if operated under dynamic load conditions coupled with relatively high-temperature values. A non-prismatic fixed-free cantilever ABS beam was used in this study. The beam specimens were manufactured with a 3D printer based on FDM. A total of 190 specimens were tested with a combination of different temperatures, initial seeded damage or crack, and crack location values. The structural dynamic response, crack propagation, crack depth quantification, and their changes due to applied temperature were investigated by using analytical, numerical, and experimental approaches. In experiments, a combination of the modal exciter and heat mats was used to apply the dynamic loads on the beam structure with different temperature values. The response measurement and crack propagation behavior were monitored with the instrumentation, including a 200× microscope, accelerometer, and a laser vibrometer. The obtained findings could be used as an in-situ damage assessment tool to predict crack depth in an ABS beam as a function of dynamic response and applied temperature
- …