Characteristics of Errors in Open and Closed Trilateration Nets

Distance measurements have been more and more easy and accurate to carry out, and it is expected that distance mesurements may provide rather accurate results than angle measurements. Under these circumstances, caracteritics of errors in typical trilateration nets are investigated. The nets investigated are as follows: From single row of chains to pranimetrically extended nets in figure, open and closed networks with respect to external constraint, and with and without as to internal constraint. Computations are performed by use of the method of condition equations, and behaviours of error propagation and errors of coordinates of stations in the nets are shown in case of typical nets. For example, effects for decrease in error by composing a double row of chains and by enforcing external constraints are explained

Decoherence and dephasing in a quantum measurement process

We numerically simulate the quantum measurement process by modeling the measuring apparatus as a one-dimensional Dirac comb that interacts with an incoming object particle. The global effect of the apparatus can be well schematized in terms of the total transmission probability and the decoherence parameter, which quantitatively characterizes the loss of quantum-mechanical coherence and the wave-function collapse by measurement. These two quantities alone enable one to judge whether the apparatus works well or not as a detection system. We derive simple theoretical formulas that are in excellent agreement with the numerical results, and can be very useful in order to make a ``design theory'' of a measuring system (detector). We also discuss some important characteristics of the wave-function collapse. \textcopyright{} 1996 The American Physical Society

Electrochemical Performance of Nanorod-like (La, Zr) Co-Doped Li-rich Li₁.₂Ni₀.₂Mn₀.₆O₂ OF ACCESS Cathodes for Use in Lithium-Ion Batteries

A lithium-rich layered structure in lithium-ion batteries (LIBs) has attracted much attention due to its high capacity of over 250 mAhg⁻¹ after activation. This could satisfy the requirements of next-generation energy-storage devices. However, a spinel-like impurity phase that forms from the pristine layered structure during cycling is considered to be harmful to the structure stability and Li⁺ mobility, resulting in undesired electrochemical performance. In this study, nanorod-like Li₁.₂Ni₀.₂Mn₀.₆O₂ with a three-dimensional architecture was synthesized by evaporative-crystallization with as-prepared nano-MnO₂ as a hard template. The structure stability and Li⁺ mobility of the nanorod-like Li₁.₂Ni₀.₂Mn₀.₆O₂ was improved by the addition of an appropriate molar ratios of (La, Zr) co-dopants. This combination exhibited outstanding capacity retention of 80.9% with a stable discharge capacity of 102 mAh g⁻¹ after 300 cycles under a high current density of 1000 mAg⁻¹ (corresponding to S C). This study suggests that the use of a multi-prong strategy that combines morphology control and co-doping should be an effective method for improving the high-rate performance of Li-rich materials

LiNi₀.₅Mn₁.₅O₄ Cathode Materials Co-Doped with La³⁺ and S²⁻ for Use in Lithium-Ion Batteries

Spherical LiNi₀.₅Mn₁.₅O₄ particles co-doped with lanthanum (La) and sulfur (S) were synthesized by a facile co-precipitation assisted solid-state annealing method with stable oxysulfide La₂O₂S (x = 0, 0.3, 0.5, 0.7, 1.0, and 1.2 at%) as a dopant. The prepared composite materials exhibited a slight shrinkage of lattice parameters without any impurity phase under x <= 0.7 at%, and the Ni/Mn disordered arrangement in the spinel lattice increased with an increase in the ratio of dopants, as confirmed by X-ray diffraction and Raman spectroscopy. X-ray photoelectron spectroscopy and electrochemical measurements also clearly indicated that the residual Mn³⁺ in the cubic lattice could be effectively eliminated with the use of La₂O₂S dopants. The composite materials showed outstanding rate and cycling performance compared with those of the pristine material. Specifically, the material doped with 0.5 at% La₂O₂S showed a high reversible capacity of 115.9 mAh g⁻¹ at 10 C, and a remarkable cycling performance of 109.2 mAh g⁻¹ even after 200 cycles. All of these extraordinary performances were attributed to the synergistic effects of La and S in the spinel structure, which induce a suitable pathway for lithium ion and a robust architecture during the electrochemical assessment

Idiopathic Pneumonia Syndrome Refractory to Ruxolitinib after Post-Transplant Cyclophosphamide-based Haploidentical Hematopoietic Stem Cell Transplantation: Lung Pathological Findings from an Autopsy Case

A 69-year-old Japanese man with acute leukemia received post-transplant cyclophosphamide-based haploidentical stem cell transplantation (PTCY-haplo-SCT) but was readmitted with dyspnea and ground-glass-opacities of the lungs. Bronchoscopy showed inflammatory changes with no signs of infection. He received steroids but required intubation as his condition deteriorated. In addition to antithymocyte globulin and cyclophosphamide, we administered ruxolitinib but failed to save him. Autopsy findings revealed fibrotic nonspecific interstitial pneumonia (NSIP) without evidence of organizing pneumonia or infection. Thus, we diagnosed idiopathic pneumonia syndrome (IPS). As far as our knowledge, this is the first case of IPS with NSIP histology after PTCY-haplo-SCT

Magnetic properties and magnetic domain observation of ndfeb sintered magnets treated by grain boundary diffusion process with dyal co-sorption

Effective grain boundary diffusion (GBD) process with DyAl co-sorption is applied to enhance the coercivity of NdFeB sintered magnets. The coercivity of the magnet (HcJ = 1789 kA m⁻¹) subjected to the present GBD treatment was observed to be superior to that of the untreated magnet (HcJ = 1003 kA m⁻¹) and the conventional GBD magnet (HcJ = 1661 kA m⁻¹) treated with DyAl alloy. In the present GBD magnet, the DyAl co-sorption process facilitated Dy diffusion into the center region of the magnet (thickness: 3.5 mm), resulting in high coercivity. Further, magnetic domain observations were made using magnetic force microscopy (MFM) to observe the thermal demagnetization behavior of the present GBD magnet. The present GBD magnet suppressed the continuous domain reversal of adjacent grains; thus, the partially persistent single-domain structure remained, even at 453 K.M.Uenohara, H.Nishio, K.Toyoki, et al. Magnetic properties and magnetic domain observation of ndfeb sintered magnets treated by grain boundary diffusion process with dyal co-sorption. Materials Transactions 62, 1216 (2021); https://doi.org/10.2320/matertrans.MT-M2020389