37 research outputs found
Pushing the Known Performance Envelope of Kinetic Hydrate Inhibitors - Powerful Synergy of Trialkylamine Oxides with Acrylamide-based Polymers
Poly(N-isopropyl methacrylamide) (PNIPMAm) and copolymers are a class of commercially used kinetic hydrate inhibitors (KHIs) for deployment in oil and gas field production flow lines. Here, we report improvements of the KHI performance of PNIPMAm in the presence of various alkyl amine oxide (chain lengths C3–C6)-based synergists. A structure II hydrate-forming gas mixture was used to examine the KHI performance of PNIPMAm in slow constant cooling (ca. 1 °C/h) high-pressure (76 bar) rocking cell experiments. Blends of amine oxide as a synergist with PNIPMAm extended the hold time to first-detected gas hydrate formation. The KHI performance of PNIPMAm is improved going from propyl to butyl but is even better for pentyl, isopentyl, and isohexyl substituents on the amine-N-oxide. With added isobutyl glycol ether as the solvent, a solution of 1000 ppm low-molecular-weight (4700 g/mol) PNIPMAm (20.1% solution in isobutyl glycol ether) with 1000 ppm triisopentylamine oxide (TiPeAO) gave no detectable hydrate formation down to 2 °C. The same formulation in isothermal tests at 68 bar and 4 °C in the presence of externally added liquid hydrocarbon (n-decane) giving 15.5 °C subcooling gave no catastrophic hydrate formation for 48 h. These are the some of the best results we have seen in our steel rocking cells. Good synergy of TiPeAO with polyacryloylpyrrolidine was also observed but not as good as with PNIPMAm. The study also highlights that overdosing the polymer or synergist in the blends can worsen the KHI performance, probably by unwanted interaction between the two chemicals.publishedVersio
Powerful Synergy of Acetylenic Diol Surfactants with Kinetic Hydrate Inhibitor Polymers - Choosing the Correct Synergist Aqueous Solubility
The performance of injected kinetic hydrate inhibitor (KHI) polymer solutions can be boosted considerably by judicious choice of the polymer solvent system. We report the excellent KHI synergism of the low-foaming acetylenic diol gemini surfactant 2,4,7,9-tetramethyl-5-decyne-4,7-diol (TMDD) with poly(N-vinyl caprolactam), N-vinyl caprolactam:N-vinyl pyrrolidone copolymer, and poly(N-isopropylmethacrylamide). High-pressure rocking cell tests, using the slow constant cooling method or the isothermal method, were carried out with a natural gas mixture giving structure II hydrates as the preferred thermodynamically stable phase. Poly(oxyethylene) derivatives of TMDD, which are far more water-soluble than TMDD, gave significantly lower synergetic KHI performance with the same polymers. It is conjectured that the low aqueous solubility of TMDD (1700 ppm at 20 °C) and its two isobutyl groups are key features contributing to the synergism. However, when decane was added to the system as a model liquid hydrocarbon phase, the synergetic performance decreases, probably due to partitioning of TMDD to the hydrocarbon phase. This highlights the need to choose synergist systems which are retained in the aqueous phase for optimal performance when condensate or oil is present in the produced fluids. Optimizing the structure and aqueous solubility of the synergist (solvent or otherwise) can be seen as complementary to the known principle of optimizing the structure and solubility of the KHI polymer.publishedVersio
Boronic and Organic Acids as Synergists for a Poly(N-vinylcaprolactam) Kinetic Hydrate Inhibitor
A range of boronic acids have been investigated as synergists for the kinetic hydrate inhibitor (KHI) polymer, poly(N-vinylcaprolactam) (PVCap, Mw ≈ 10,000 g/mol) using high pressure rocking cells, a natural gas mixture, and a slow constant cooling (1 °C/h) test method from 76 bar. Surprisingly, unlike other classes of synergists such as alcohols and quaternary ammonium salts, the boronic acids that gave the best synergy had an alkyl or cycloalkyl tail with a maximum of a 3 carbon atom distance from the boron atom. The tail-branched iso-butylboronic acid was the best of these, yet it showed a negligible KHI effect when tested alone. However, consistent with the other classes of synergists, tail branching or use of a cyclic alkyl group was beneficial. Interestingly, boronic acids with chains of 5 to 6 carbon atoms, i.e., n-pentyl- and n-hexylboronic acids, were antagonistic to the PVCap KHI performance. For comparison, several organic acids were also investigated as synergists with PVCap. The same trend as for the boronic acids regarding the size and branching of the acid was seen. 3-Methylbutanoic acid gave the best synergy although worse than that of iso-butylboronic acid. The synergistic performance of sodium salts of some organic acids differed markedly to that of the free organic acids. Sodium 3,3-dimethylbutanoate gave the best synergy with PVCap.publishedVersio
Further Investigation of Solvent Synergists for Improved Performance of Poly(N-vinylcaprolactam)-Based Kinetic Hydrate Inhibitors
Poly(N-vinylcaprolactam) (PVCap) and related copolymers have been used as kinetic hydrate inhibitors (KHIs) to combat gas hydrate formation in oil and gas field production flow lines. It is known that the addition of certain solvents to the KHI polymer can enhance its ability to hinder gas hydrate formation. In an earlier study, a wide range of alcohols, glycol ethers, and ketones were investigated as synergetic solvents with PVCap. In that study, an outstanding synergetic effect was achieved by 4-methyl-1-pentanol (iHexOl). This report builds on that study by investigating iHexOl in more detail as well as some newly synthesized solvents predicted by the first study to have good synergism. Both slow constant cooling (SCC) and isothermal KHI experiments were conducted in high-pressure steel rocking cells using a structure II-forming natural gas mixture. The KHI polymer concentration, solvent concentration, and mixed solvent systems were investigated. The solvent synergist water solubility, also in brines, and partitioning to the liquid hydrocarbon phase are shown to be important factors to consider for optimizing KHI performance. Further, it was observed that the optimal molecular weight distribution for the KHI polymer when used with a solvent synergist is not the same as the optimum distribution when using the polymer alone.publishedVersio
Synergistic Gas Hydrate and Corrosion Inhibition Using Maleic Anhydride: N-Isopropylmethacrylamide Copolymer and Small Thiols
Kinetic gas hydrate inhibitors (KHIs) are often used in combination with film-forming corrosion inhibitors (CIs) in oilfield production flow lines. However, CIs can be antagonistic to KHI performance. In this study, maleic anhydride-co-N-isopropylmethacrylamide copolymer (MA:NIPMAM) and its derivatives were successfully synthesized and tested for gas hydrate and corrosion inhibition. KHI slow constant cooling (1 °C/h) screening tests in high-pressure rocking cells with synthetic natural gas and CO2 corrosion bubble tests in brine were performed in this study. The results revealed that underivatized MA:NIPMAM in water (as maleic acid:NIPMAM copolymer) showed poor KHI performance, probably due to internal hydrogen bonding. However, derivatization of MA:NIPMAM with 3-(dibutylamino)-1-propylamine (DBAPA) to give MA:NIPMAM-DBAPA gave excellent gas hydrate inhibition performance but only weak corrosion inhibition performance. Unlike some KHI polymers, MA:NIPMAM-DBAPA was compatible with a classic fatty acid imidazoline CI, such that neither the KHI polymer performance nor the corrosion inhibition of the imidazoline was affected. Furthermore, excellent dual gas hydrate and corrosion inhibition was also achieved in blends of MA:NIPMAM-DBAPA with small thiol-based molecules. In particular, the addition of butyl thioglycolate not only gave excellent corrosion inhibition efficiency, better than adding the fatty imidazoline, but also enhanced the overall gas hydrate inhibition performance.publishedVersio
Phosphonated Iminodisuccinates-A Calcite Scale Inhibitor with Excellent Biodegradability
Scale inhibitors are an extremely important chemical in upstream oil and gas field operations and water treatment industries. These inhibitors prevent nucleation and/or crystal growth of scales such as calcite and barite. This keeps the pipes and other equipment and surfaces free from deposits, allowing the maximum flow of aqueous fluids. However, many classes of scale inhibitors are poorly biodegraded, especially in seawater, making them unacceptable in regions with strict environmental regulations. Tetrasodium iminodisuccinate (TSIDS) is a biodegradable, industrial-scale dissolver that we imagined could have potential as a scale inhibitor, given the correct derivatization. We first synthesized phosphonated derivatives of TSIDS (TSIDS-P) and the homologue phosphonate made from ethylenediamine disuccinate (TSEDAS-P). In particular, TSIDS-P was shown to be a good calcite scale inhibitor with good calcium compatibility but also exhibited over 70% biodegradation (BOD28) in the OECD 306 seawater test. This should make TSIDS-P a readily biodegradable scale inhibitor of great interest to the petroleum and water treatment industries.publishedVersio
Non-Amide Polymers as Kinetic Hydrate Inhibitors-Maleic Acid/ Alkyl Acrylate Copolymers and the Effect of pH on Performance
Kinetic hydrate inhibitors (KHIs) have been used for over 25 years to prevent gas hydrate formation in oil and gas production flow lines. The main component in KHI formulations is a water-soluble polymer with many amphiphilic groups, usually made up of amide groups and adjacent hydrophobic groups with 3–6 carbon atoms. KHI polymers are one of the most expensive oilfield production chemicals. Therefore, methods to make cheaper but effective KHIs could improve the range of applications. Continuing earlier work from our group with maleic-based polymers, here, we explore maleic acid/alkyl acrylate copolymers as potential low-cost KHIs. Performance experiments were conducted under high pressure with a structure II-forming natural gas mixture in steel rocking cells using the slow (1 °C/h) constant cooling test method. Under typical pipeline conditions of pH (4–6), the performance of the maleic acid/alkyl acrylate copolymers (alkyl = iso-propyl, iso-butyl, n-butyl, tetrahydrofurfuryl, and cyclohexyl) was poor. However, good performance was observed at very high pH (13–14) due to the thermodynamic effect from added salts in the aqueous phase and the removal of CO2 from the gas phase. A methyl maleamide/n-butyl acrylate copolymer gave very poor performance, giving evidence that direct bonding of the hydrophilic amide and C4 hydrophobic groups is needed for good KHI performance. Reaction of the maleic anhydride (MA) units in MA/alkyl acrylate 1:1 copolymers with dibutylaminopropylamine or dibutylaminoethanol gave polymers with good KHI performance, with MA/tetrahydrofurfuryl methacrylate being the best. Oxidation of the pendant dibutylamino groups to amine oxide groups improved the performance further, better than poly(N-vinyl caprolactam).publishedVersio
Maleic and Methacrylic Homopolymers with Pendant Dibutylamine or Dibutylamine Oxide Groups as Kinetic Hydrate Inhibitors
Kinetic hydrate inhibitors (KHIs) are applied in oil and gas fields to prevent gas hydrate formation, most often in cold subsea flow lines. The main component in industrial KHI formulations is a water-soluble polymer with many amphiphilic groups of which the hydrophilic part is most commonly the amide functional group. In the last decade, we have investigated polyamine oxides as alternatives to polyamides due to the strong hydrogen bonding of the amine oxide group. Here, we report the KHI performance of maleic and methacrylic homopolymers with dialkylamine and dialkylamine oxide pendant groups. Performance screening experiments were conducted under high pressure with a Structure II-forming natural gas mixture in steel rocking cells using the slow (1 °C/h) constant cooling test method. Polymers with dibutylamine groups gave much better KHI performance than polymers with dimethylamine or diethylamine groups. Polyamines formed from polymaleic anhydride reacted with 3-(dibutylamino)-1-propylamine (DBAPA) or 2-(dibutylamino)-ethanol (DBAE) gave good water solubility and good KHI performance, probably due to self-ionization between the dibutylamino and carboxylic acid groups. The lack of self-ionization for the methacryl homopolymers of DBAPA and DBAE explains why these polymers are not water-soluble. Oxidation of the maleic or methacryl polyamines to polyamine oxides gave water-soluble polymers with good compatibility with brines (0.5–7.0 wt % NaCl), but only the DBAPA-based polyamine oxides gave improved KHI performance compared to the polyamines. Poly(3-(dibutylamino oxide)-1-propyl methacrylamide) gave a similar performance to commercial N-vinyl pyrrolidone:N-vinyl caprolactam 1:1 copolymer and without a cloud point in deionized water up to +95 °C.publishedVersio
High-Performance Kinetic Hydrate Inhibition with Poly(N-isopropyl methacrylamide) and Triisopentylamine Oxide─Surprising Concentration-Dependent Results
Kinetic hydrate inhibitors (KHIs) are mostly used to prevent the deposition of gas hydrates in gas and condensate production flow lines. The main component in a KHI formulation is a water-soluble polymer, blended with solvents and other synergists to boost the performance. The performance limit in terms of subcooling and other factors restricts the application range of KHIs. Earlier, we reported on the synergetic performance of trialkylamine oxides with polyalkyl(meth)acrylamides using high-pressure steel rocking cell experiments. In particular, blends of poly(N-isopropyl methacrylamide) (PNIPMAm) in isobutyl glycol ether (iBGE) with triisopentylamine oxide (TiPeAO) gave exceptional KHI performance, better than what we have seen for any other KHI blend so far. Therefore, it is important to evaluate the limitations of this KHI. Here, we report the results of the KHI performance of this blend in more detail. The cloud point decreased with increasing salinity (0–15 wt % NaCl), but the blend remained soluble, giving excellent KHI performance even at the highest brine concentration. We also varied the concentration of the PNIPMAm/TiPeAO blend from 250 to 5000 ppm in deionized water in KHI slow constant cooling (SCC) tests using both a natural gas mixture [synthetic natural gas (SNG)] and methane gas. A unique concentration-dependent performance was discovered, wherein the performance decreased greatly above about 1500–2000 ppm, possibly due to aggregation of the polymer and amine oxide. This was observed for SCC tests with both SNG and methane, with the phenomenon being more pronounced for methane. In addition, an unusual double pressure drop was observed in SCC tests with methane and a blend of 5000 ppm PNIPMAm and TiPeAO. This study underlines the fact that overdosing of components in a synergistic blend can sometimes lead to detrimental effects on the KHI performance.publishedVersio
Review of Nanotechnology Impacts on Oilfield Scale Management
Nanotechnology has grown rapidly in both research and applications over the past two decades including in the upstream petroleum industry. A recent hot area for studying nanotechnology has been oilfield scale management. The formation of oilfield scale deposits such as calcium carbonate and Group II sulfate scales in conduits and on equipment, both downhole and topside, can cause serious loss of hydrocarbon production and unwanted downtime. Scale management is expensive to the field operator, mostly due to downtime causing deferred or loss of production. Many types of nano-based materials and treatments have been developed to combat this problem, most of them containing one form or another of an organic scale inhibitor. In this review, we reviewed the various types of nanotechnologies that have been developed and include comparisons to conventional treatments where available. The nanotechnologies include nanoemulsions, nanoparticles, magnetic nanoparticles, polymer nanocomposites, carbon-based nanotubes, and other miscellaneous technologies. Several nanoproducts developed for squeeze treatments indicate improved squeeze lifetime compared to conventional squeeze treatments. Other potential benefits include improved thermal stability for high-temperature wells, reduced formation damage for water-sensitive wells, and environmental impact.publishedVersio