Finite Element Analyses of Lipped Chanel Beams with Web Openings in Shear

Cold-formed steel members are increasingly used as primary structural elements in buildings due to the availability of thin and high strength steels and advanced cold-forming technologies. Cold-formed lipped channel beams (LCB) are commonly used as flexural members such as floor joists and bearers. Shear behaviour of LCBs with web openings is more complicated and their shear capacities are considerably reduced by the presence of web openings. However, limited research has been undertaken on the shear behaviour and strength of LCBs with web openings. Hence a numerical study was undertaken to investigate the shear behaviour and strength of LCBs with web openings. Finite element models of simply supported LCBs with aspect ratios of 1.0 and 1.5 were considered under a mid-span load. They were then validated by comparing their results with test results and used in a detailed parametric study. Experimental and numerical results showed that the current design rules in cold-formed steel structures design codes are very conservative for the shear design of LCBs with web openings. Improved design equations were therefore proposed for the shear strength of LCBs with web openings. This paper presents the details of this numerical study of LCBs with web openings, and the results

Shear Strength of Hollow Flange Channel Beams with Stiffened Web Openings

This LiteSteel beam (LSB) is a new cold-formed steel hollow flange channel section produced using a patented manufacturing process involving simultaneous cold-forming and dual electric resistance welding. The LSBs are commonly used as floor joists and bearers with web openings in buildings. Their shear strengths are considerably reduced when web openings are included for the purpose of locating building services. Shear tests of LSBs with web openings have shown that there is up to 60% reduction in the shear capacity. Hence there is a need to improve the shear capacity of LSBs with web openings. A cost effective way to eliminate the shear capacity reduction is to stiffen the web openings using suitable stiffeners. Hence numerical studies were undertaken to investigate the shear capacity of LSBs with stiffened web openings. In this research, finite element models of LSBs with stiffened web openings in shear were developed to simulate the shear behaviour and strength of LSBs. Various stiffening methods using plate and LSB stiffeners attached to LSBs using both welding and screw-fastening were attempted. The developed models were then validated by comparing their results with experimental results and used in further studies. Both finite element and experimental results showed that the stiffening arrangements recommended by past research for cold-formed steel channel beams are not adequate to restore the shear strengths of LSBs with web openings. Therefore new stiffener arrangements were proposed for LSBs with web openings. This paper presents the details of this research project using numerical studies and the results

Effect of Corner Strength Enhancement on Shear Behaviour of Stainless Steel Lipped Channel Sections

During the cold-forming process of manufacturing, stainless steel sheets undergo plastic deformations, in particularly around corner regions of press braked sections. These plastic deformations lead to significant changes in material properties of stainless steel compared to its flat sheet properties. Consequently, yield strength and ultimate strength increments can be envisaged and this process is termed as cold working. Stainless steel exhibits significant level of strain hardening under plastic deformations. This is the main reason for these strength enhancements. In the structural design process of stainless steel sections, these strength increments are required to be considered to harness the benefits arising from it. Therefore, previous research proposed predictive models for these strength enhancements. In this context, the effect of corner strength enhancement on press-braked stainless steel lipped channel sections under shear was examined in this paper. 120 finite element models were developed. Different corner radii and section thicknesses were taken into account. Results highlighted that the effect of cold working on the shear capacity of stainless steel lipped channel sections is more significant in compact sections compared to slender sections where up to 9% increment was observed. Further analysis was conducted using 40 finite element models to highlight the inelastic reserve capacity available in compact stainless steel lipped channel sections in shear. From the results, it was concluded that when web slenderness is less than 0.25 more than 40% shear capacity increment can be achieved due to strain-hardening of stainless steel

Section Moment Capacity Tests of Rivet-Fastened Rectangular Hollow Flange Channel Beams

The rivet-fastened rectangular hollow flange channel beam (RHFCB) is a new cold-formed hollow section proposed as an alternative to welded hollow flange steel beams. It is a mono-symmetric channel section made by rivet fastening two torsionally rigid rectangular hollow flanges to a web plate. This method will allow the designers to develop optimum sections, with affordable rivet connection between the web and flange elements. The new rivet-fastened RHFCB has unique characteristics that are not encountered in conventional hot-rolled and cold-formed steel channel sections. Therefore an experimental study consisting of 15 section moment capacity tests was conducted with different rivet spacings to investigate the flexural behaviour and strength of rivet-fastened RHFCB members. The ultimate moment capacities from the tests were compared with the capacities predicted by the current design rules for steel structures, and their suitability to predict the section moment capacities of RHFCBs was investigated. The applicability of the Direct Strength Method based design rules was also investigated. This paper presents the details of this experimental study and the results

Shear Behaviour of Cold-Formed Stainless Steel Lipped Channels with Reduced Support Restraints

Lipped channel beams are commonly used in buildings for load-bearing components such as floor joists and roof purlins. The typical practice is to use one-sided web side plates (WSPs) to attach beams from their webs to the supports at the connections, through bolts. In such realistic conditions, it is not practical to use WSPs over the full height of the webs, thus only a part of the web height is restrained at the supports. This controls the mobilising of diagonal tension field in the web and also provides less restraint to the lateral movement of the web. Therefore, realistic support conditions affect the shear capacity due to the lack of restraint of the web at the supports. On the other hand, the current shear design rules are based on ideal support conditions which do not represent the true scenario. Therefore, it is critical to investigate the effect of reduced support restraints on the shear capacity since it has been given less attention in the literature. This paper presents the effect of reduced support restraints on the shear capacity of stainless steel lipped channel beams. Finite element models were developed to study the effect with regard to various influential parameters. From the finite element results, it was found that the shorter the WSP—the higher the shear capacity reduction, where about 50% shear capacity reduction was observed for 60% reduction in WSP height. Furthermore, it was concluded that compact sections exhibit more significant capacity reduction than slender sections when reducing the WSP height. Therefore, a reduction factor was introduced to the current direct strength method shear design rules considering the effect of reduced support restraints on the shear capacity

Numerical Studies of Rivet-Fastened Rectangular Hollow Flange Channel Beams

The rivet-fastened rectangular hollow flange channel beam (RHFCB) is a new cold-formed hollow section proposed as an alternative to welded hollow flange beams. It is a monosymmetric channel section made by rivet-fastening two torsionally rigid rectangular hollow flanges to a web plate. This method will allow the designers to develop optimum sections, with affordable rivet connection between their web and flange elements. In addition to this unique geometry, the rivet-fastened RHFCBs also have unique characteristics relating to their stress-strain characteristics, residual stresses, initial geometric imperfections and hollow flanges that are not encountered in conventional hot-rolled and cold-formed steel channel sections. Therefore detailed experimental and numerical studies were conducted to study the section moment capacities of rivet-fastened RHFCBs. This paper presents the details of the numerical study of rivet-fastened RHFCBs and the results. Finite element models of rivet-fastened RHFCBs were developed by including all the significant effects that influence their ultimate section moment capacities, including material inelasticity, and geometric imperfections. The results from finite element analyses were then compared with corresponding experimental results and the predictions from the current design rules. Test results showed that the developed finite element models were able to predict the behaviour and section moment capacities of RHFCBs. The validated model was then used in a detailed parametric study that produced additional section moment capacity data of the rivet-fastened RHFCBs

Behaviour of LiteSteel Beams Subject to Combined Shear and Bending Actions

This paper presents the details of a numerical study of a cold-formed steel beam known as LiteSteel Beam (LSB) subject to combined shear and bending actions. The LSB sections are produced by a patented manufacturing process involving simultaneous cold-forming and electric resistance welding. They have a unique shape of a channel beam with two rectangular hollow flanges. To date, however, no investigation has been conducted into the strength of LSB sections under combined shear and bending actions. Hence a numerical study was undertaken to investigate the behaviour and strength of LSBs subject to combined shear and bending actions. In this research, finite element models of LSBs were developed to simulate the combined shear and bending behaviour and strength of LSBs. They were then validated by comparing their results with test results and used in a parametric study. Both experimental and finite element analysis results showed that the current design equations are not suitable for combined shear and bending capacities of LSBs. Hence improved design equations are proposed for the capacities of LSBs subject to combined shear and bending actions

Design of Rivet Fastened Rectangular Hollow Flange Channel Beams Subject to Local Buckling

The innovative, rivet fastened Rectangular Hollow Flange Channel Beam (RHFCB) is a new type of cold-formed steel section, proposed as an extension to the widely researched hollow flange beams. The hollow flange beams have garnered much interest in the past due to the sections having capacities more typically associated with hot-rolled steel sections. Various researches have been carried out to investigate the behavior of continuously welded hollow flange beams but little is known on the behavior of RHFCBs. The structural behaviour of the RHFCB is unique compared to other conventional cold-formed steel sections and its moment capacity reduces with rivet spacing. The current cold-formed steel design standards do not provide a calculation method to include the effects of intermittent fastening. In this research an extensive parametric study was conducted using validated finite element models to investigate the section moment capacity of RHFCBs. This paper presents the findings from the parametric study and proposes new design equations for the section moment capacity of RHFCBs in the Direct Strength Method format. The parametric study considers various slenderness regions, section dimensions and rivet spacing. In the new design equations, a reduction factor parameter is included to calculate the section moment capacity of RHFCBs at any rivet spacing up to 200 mm

New Web Crippling Design Rules for Cold-Formed Steel Beams

Lipped channel beams (LCBs) and SupaCee sections are commonly used as floor joists and bearers in the construction industry. SupaCee section is one of the cold-formed steel members, which is increasingly used in the building construction sector. It is characterized by unique ribbed web and curved lip elements, and is claimed to be more economical with extra strength than the traditional channel sections. These thin-walled LCBs and SupaCee sections are subjected to specific local and global failures, one of them being web crippling. Several experimental and numerical studies have been conducted in the past to study the web crippling behaviour and capacities of different cold-formed steel sections under different concentrated load cases. However, due to the nature of the web crippling phenomenon and many factors influencing the web crippling capacities, capacity predictions given by most of the cold-formed steel design standards are either unconservative or conservative. Hence both experimental and finite element studies were conducted to assess the web crippling behaviour and strengths of LCBs and SupaCee sections under ETF, ITF, EOF and IOF load cases. New equations were proposed to determine the web crippling capacities of LCBs and SupaCee sections based on the results from experiments and finite element analyses. Suitable DSM based web crippling design equations were also developed

Numerical studies of steel channels with staggered slotted perforations subject to combined bending and shear actions

Cold-formed steel studs and purlins with staggered slotted perforations in webs are used in construction to improve thermal performance of the profiles and energy efficiency of structures. On the other hand, the web perforations adversely affect structural performance of the members, especially their shear, bending and combined bending and shear strengths. Relatively little research has been reported on this subject despite its importance. Many research studies have been carried out to evaluate the combined bending and shear behaviour of conventional cold-formed channel beams. To date, however, no investigation has been conducted into the strength of cold-formed steel channels with staggered slotted perforations under combined bending and shear actions. Finite element models of cold-formed steel channels with staggered slotted perforations were developed to simulate their combined bending and shear behaviour and strength. They were then validated by comparing the results with available experimental test results and used in a detailed parametric study. This paper presents the details of the numerical studies of cold-formed steel channels with staggered slotted perforations and the results