A novel profluorescent dinitroxide for imaging polypropylene degradation

Free-radical processes underpin the thermo-oxidative degradation of polyolefins. Thus, to extend the lifetime of these polymers, stabilizers are generally added during processing to scavenge the free radicals formed as the polymer degrades. Nitroxide radical precursors, such as hindered amine stabilizers (HAS),1,2 are common polypropylene additives as the nitroxide moiety is a potent scavenger of polymer alkyl radicals (R¥). Oxidation of HAS by radicals formed during polypropylene degradation yields nitroxide radicals (RRNO¥), which rapidly trap the polymer degradation species to produce alkoxyamines, thus retarding oxidative polymer degradation. This increase in polymer stability is demonstrated by a lengthening of the “induction period” of the polymer (the time prior to a sharp rise in the oxidation of the polymer). Instrumental techniques such as chemiluminescence or infrared spectroscopy are somewhat limited in detecting changes in the polymer during the initial stages of degradation. Therefore, other methods for observing polymer degradation have been sought as the useful life of a polymer does not extend far beyond its “induction period

A guide to the synthesis of block copolymers using reversible-addition fragmentation chain transfer (RAFT) polymerization

This is an accepted manuscript of an article published by Royal Society of Chemistry in Chemical Society Reviews on 16/10/2013, available online: https://doi.org/10.1039/C3CS60290G The accepted version of the publication may differ from the final published version.The discovery of reversible-deactivation radical polymerization (RDRP) has provided an avenue for the synthesis of a vast array of polymers with a rich variety of functionality and architecture. The preparation of block copolymers has received significant focus in this burgeoning research field, due to their diverse properties and potential in a wide range of research environments. This tutorial review will address the important concepts behind the design and synthesis of block copolymers using reversible addition-fragmentation chain transfer (RAFT) polymerization. RAFT polymerization is arguably the most versatile of the RDRP methods due to its compatibility with a wide range of functional monomers and reaction media along with its relative ease of use. With an ever increasing array of researchers that possess a variety of backgrounds now turning to RDRP, and RAFT in particular, to prepare their required polymeric materials, it is pertinent to discuss the important points which enable the preparation of high purity functional block copolymers with targeted molar mass and narrow molar mass distribution using RAFT polymerization. The key principles of appropriate RAFT agent selection, the order of monomer addition in block synthesis and potential issues with maintaining high end-group fidelity are addressed. Additionally, techniques which allow block copolymers to be accessed using a combination of RAFT polymerization and complementary techniques are touched upon. © The Royal Society of Chemistry.Published versio

Self-healing polymers synthesized by Ring Opening Metathesis Polymerization (ROMP) of bio-derived furanic molecules

This is an accepted manuscript of an article published by Springer in Journal of Materials Science, available online at: https://doi.org/10.1007/s10853-021-05853-x The accepted version of the publication may differ from the final published version.Novel bio-derivable tricyclic oxanorbornene polymers, based upon secondary furfurylamine and maleic anhydride derived monomers, prepared via ring opening metathesis polymerization (ROMP) are reported. The tricyclic oxanorbornenes with fused lactam ring are exo Diels–Alder adducts. DFT calculations support the cycloaddition is the first step followed by lactamization. The polymerizations are rapid and deliver polymers with targeted molar mass and low dispersity (Đ). The prepared polymers with furanyl pendant groups have reactivity toward maleimide-bearing compounds to form thermally induced crosslinked networks through thermoreversible Diels–Alder reactions. The thermoreversible (self-healing) behavior is confirmed by sol gel transition. This new class of bio-derived polymer could be further modified with different active moieties as pendant groups and hence be tailored for more applications in the future

Effect of scandium triflate on the RAFT copolymerization of methyl acrylate and vinyl acetate controlled by an acid/base “switchable” chain transfer agent

Modulation of the activity of an acid/base switchable dithiocarbamate RAFT agent, cyanomethyl (4-fluorophenyl)(pyridin-4-yl)carbamodithioate, with the Lewis acid scandium triflate (Sc(OTf)3) was investigated to examine the ability to deliver improved control over RAFT copolymerizations involving both more-activated and less-activated monomers—specifically the copolymerization of methyl acrylate (MA) and vinyl acetate (VAc). The introduction of either 0.5 or 1 mol equiv of Sc(OTf)3, with respect to RAFT agent, into a RAFT copolymerization of MA and VAc provides substantially improved control resulting in significantly reduced molar mass dispersities (Đ) (∼1.1–1.3) than achieved in its absence (Đ ∼ 1.3–1.4). Furthermore, similar introduction of Sc(OTf)3 into MA homopolymerization mediated by the same RAFT agent also delivered polymers of very low Đ (∼1.15). Sc(OTf)3 was also found to lower the rate of polymerization and alter the copolymerization reactivity ratios for MA and VAc. Increasing the Lewis acid concentration provides enhanced incorporation of the less active monomer, VAc, into the copolymers ([Sc(OTf)3]/[RAFT] = 0, rMA = 4.04, rVAc = 0.032; [Sc(OTf)3]/[RAFT] = 0.5, rMA = 3.08, rVAc = 0.17; [Sc(OTf)3]/[RAFT] = 1, rMA = 2.68, rVAc = 0.62). Carbon nuclear magnetic resonance (13C NMR) and differential scanning calorimetry (DSC) analysis of preparative samples confirm the enhanced VAc incorporation with increased levels of Sc(OTf)3. Importantly the inclusion of Sc(OTf)3 does not deleteriously affect the thiocarbonylthio end-groups of the RAFT polymers, with high end-group fidelity being observed in all copolymerizations

Polyurea microcapsules from isocyanatoethyl methacrylate copolymers

The synthesis of two types of isocyanate side chain containing copolymers, poly(methyl methacrylate-co-isocyanatoethyl methacrylate) (P(MMA-co-IEM)) and poly(benzyl methacrylate-co-isocyanatoethyl methacrylate) (P(BnMA-co-IEM)), which were synthesized by Cu(0)-mediated radical polymerization, is reported. Polymerization proceeded to high conversion giving polymers of relatively narrow molar mass distributions. The incorporation of the bulky aromatic groups in the latter copolymer rendered it sufficiently stable toward hydrolysis and enabled the isolation of the product and its characterization by 1 H and 13C NMR, and FTIR spectroscopy and SEC. Both P(MMA-co-IEM) and P(BnMA-co-IEM) were functionalized with dibutylamine, octylamine, and (R)-(1)-a-methylbenzyl-amine, which further proved the successful incorporation of the isocyanate groups. Furthermore, P(BnMA-co-IEM) was used for the fabrication of liquid core microcapsules via oil-in-water interfacial polymerization with diethylenetriamine as crosslinker. The particles obtained were in the size range of 10–90 mm in diameter independent of the composition of copolyme

The reactivity of N-vinylcarbazole in RAFT polymerization: trithiocarbonates deliver optimal control for the synthesis of homopolymers and block copolymers

This is an accepted manuscript of an article published by Royal Society of Chemistry in Polymer Chemistry on 30/04/2012, available online: https://doi.org/10.1039/C3PY00487B The accepted version of the publication may differ from the final published version.The use of various RAFT agents (ZC(S)SR) including dithiobenzoates (Z = Ph), trithiocarbonates (Z = SR′), xanthates (Z = OR′), and conventional and switchable N-aryldithiocarbamates (Z = NR′Ar) in RAFT polymerization of N-vinylcarbazole (NVC) has been explored with a view to establishing which is most effective. Consistent with earlier work, we find that xanthates and N-aryldithiocarbamates give adequate control (dispersities < 1.3) while dithiobenzoates give marked retardation. However, contrary to popular belief, we find that the polymerization of NVC is best controlled with trithiocarbonate RAFT agents, which provide both good molecular weight control, very narrow dispersities (1.1), and high end-group fidelity. The results demonstrate that NVC has intermediate reactivity, i.e. between that of the traditional more activated (MAMs; styrene, acrylates) and less activated monomers (LAMs; vinyl acetate, N-vinylpyrrolidone). A further key to good control is the selection of RAFT agent R substituent to be both a good leaving group and a good initiating radical. The cyanomethyl group meets these criteria whereas phenylethyl is a poor initiating radical for NVC polymerization. A further demonstration of the intermediate reactivity of NVC and the derived propagating radical was the successful preparation of both poly(n-butyl acrylate)-block-poly(N-vinylcarbazole) and poly(N-vinylcarbazole)-block-poly(n- butyl acrylate) with a trithiocarbonate RAFT agent (the sequence of block synthesis is not important). Two-dimensional, liquid chromatography near critical conditions-gel permeation chromatography (LCCC-GPC) has been applied to demonstrate block purity. The corresponding styrene-based blocks can also be successfully synthesized, however, the reinitiation of NVC polymerization by the polystyryl radical proved to be a constraint on the purity of polystyrene-block-poly(N-vinylcarbazole). © 2013 The Royal Society of Chemistry.The authors gratefully acknowledge the Capability Development Fund of CSIRO Materials Science and Engineering for financial support. D.J.K. acknowledges the Office of the Chief Executive of CSIRO for an OCE postdoctoral fellowship and the School of Science and Technology at the University of New England for a start-up grant.Published versio

Cu(0)-RDRP of methacrylates in DMSO: importance of the initiator

The controlled radical polymerization of methacrylates via Cu(0)-mediated RDRP is challenging in comparison to acrylates with most reports illustrating higher dispersities, lower monomer conversions and poorer end group fidelity relative to the acrylic analogues. Herein, we present the successful synthesis of poly(methyl methacrylate) (PMMA) in DMSO by judicious selection of optimal reaction conditions. The effect of the initiator, ligand and temperature on the rate and control of the polymerization is investigated and discussed. Under carefully optimized conditions enhanced control over the molecular weight distributions is obtained furnishing methacrylic polymers with dispersities as low as 1.10, even at very high conversions. A range of methacrylates were found to be tolerant to the optimized polymerization conditions including hydrophobic, hydrophilic and functional methacrylates including methyl and benzyl methacrylate, ethylene glycol methyl ether methacrylate and glycidyl methacrylate. The control retained during the polymerization is further highlighted by in situ chain extensions yielding well-defined block polymethacrylates

The effect of Z-group modification on the RAFT polymerization of N-vinylpyrrolidone controlled by "switchable" N-pyridyl-functional dithiocarbamates

This is an accepted manuscript of an article published by Royal Society of Chemistry in the Polymer Chemistry on 24/08/2015, available online: https://doi.org/10.1039/C5PY01021G The accepted version of the publication may differ from the final published version.The ability of a RAFT agent to control the polymerization of a monomer is dictated by the structures of both the monomer and the RAFT agent. In this paper, the polymerization of N-vinylpyrrolidone was examined with a series of cyanomethyl N-aryl-N-pyridyldithiocarbamates [(4-R′Ph)N(py)C(S)SCH2CN] varying in the substituent (R′) at the 4-position on the phenyl ring. The polymerization of N-vinylpyrrolidone was best controlled when R′ was methoxy; one of the least active RAFT agents in the series. The preservation of RAFT agent functionality was demonstrated by chain extension experiments with further N-vinylpyrrolidone. Again best control again was found for the RAFT agent with R′ = MeOPh. The utility of this RAFT agent was also proved with the preparation of poly(N-isopropylacrylamide)-block-poly(N-vinylpyrrolidone).The authors gratefully acknowledge the Australian Government for award of an Australian Postgraduate Award to S.J.S., the CSIRO Manufacturing Flagship and the School of Science and Technology at the University of New England for project funding.Published versio

Influence of the tetraalkoxysilane crosslinker on the properties of polysiloxane-based elastomers prepared by the Lewis acid-catalysed Piers-Rubinsztajn reaction

This is an accepted manuscript of an article published by Royal Society of Chemistry in Polymer Chemistry, available online: https://doi.org/10.1039/D1PY00872B The accepted version of the publication may differ from the final published version.We investigate the preparation of polysiloxane-based networks under solvent-free, ambient conditions using the Lewis acid catalysed Piers-Rubinsztajn (PR) reaction of hydride-terminated siloxanes with various tetrafunctional alkoxysilanes (tetraethoxysilane, tetrapropoxysilane, tetra-n-buxoxysilane, tetra-s-butoxysilane, tetra-s-butoxysilane, and tetrakis(2- ethylbutoxy)silane) as crosslinkers. We explore the effects of polysiloxane chain length and crosslinker alkyl group on the rheological performance of the elastomers. By analysing the reaction progress by grazing angle Fourier-transform infrared spectroscopy (FTIR) and determining the rheological properties of the resulting materials, we show that the use of linear or branched alkoxysilanes strongly influences the morphology and properties of these network polymers. We have shown the PR process is can be tailored to reliably produce homogeneous, polysiloxane network materials. This work provides information on the relative rates of network formation under ambient conditions with an emphasis on the impact of crosslinker alkyl chain length. Our results show that electronics and s terics both play critical roles in influencing the the rate of the curing reaction. Crucially, we newly demonstrate the benefit of a having tertiary carbon α to the SiO reaction centre, as is the case for the tetra-s-butoxysilane crosslinker, for delivering exceptionally rapid network cure and a concomitant enhancement in storage modulus of the resultant materials

The microbial production of polyhydroxyalkanoates from waste polystyrene fragments attained using oxidative degradation

© 2018 The Authors. Published by MDPI. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/polym10090957Excessive levels of plastic waste in our oceans and landfills indicate that there is an abundance of potential carbon sources with huge economic value being neglected. These waste plastics, through biological fermentation, could offer alternatives to traditional petrol-based plastics. Polyhydroxyalkanoates (PHAs) are a group of plastics produced by some strains of bacteria that could be part of a new generation of polyester materials that are biodegradable, biocompatible, and, most importantly, non-toxic if discarded. This study introduces the use of prodegraded high impact and general polystyrene (PS0). Polystyrene is commonly used in disposable cutlery, CD cases, trays, and packaging. Despite these applications, some forms of polystyrene PS remain financially and environmentally expensive to send to landfills. The prodegraded PS0 waste plastics used were broken down at varied high temperatures while exposed to ozone. These variables produced PS flakes (PS1–3) and a powder (PS4) with individual acid numbers. Consequently, after fermentation, different PHAs and amounts of biomass were produced. The bacterial strain, Cupriavidus necator H16, was selected for this study due to its well-documented genetic profile, stability, robustness, and ability to produce PHAs at relatively low temperatures. The accumulation of PHAs varied from 39% for prodegraded PS0 in nitrogen rich media to 48% (w/w) of dry biomass with the treated PS. The polymers extracted from biomass were analyzed using nuclear magnetic resonance (NMR) and electrospray ionization tandem mass spectrometry (ESI-MS/MS) to assess their molecular structure and properties. In conclusion, the PS0–3 specimens were shown to be the most promising carbon sources for PHA biosynthesis; with 3-hydroxybutyrate and up to 12 mol % of 3-hydroxyvalerate and 3-hydroxyhexanoate co-monomeric units generated