Design considerations for a time-resolved tomographic diagnostic at DARHT

An instrument has been developed to acquire time-resolved tomographic data from the electron beam at the DARHT [Dual-Axis Radiographic Hydrodynamic Test] facility at Los Alamos National Laboratory. The instrument contains four optical lines of sight that view a single tilted object. The lens design optically integrates along one optical axis for each line of sight. These images are relayed via fiber optic arrays to streak cameras, and the recorded streaks are used to reconstruct the original two-dimensional data. Installation of this instrument into the facility requires automation of both the optomechanical adjustments and calibration of the instrument in a constrained space. Additional design considerations include compound tilts on the object and image planes

Historical Perspective on the Evolutionof MPDV Probe Designs

Author Institution: National Security Technologies, LLCSlides presented at the 2016 Photonic Doppler Velocimetry (PDV) unclassified program, Bankhead Theater, Livermore, California, June 7 - 9, 2016. Afternoon program, June 8, 2016

PDV Probe Design with Stereo Imaging

Author Institution: National Security Technologies, LLCSlides presented at the 7th Annual Photonic Doppler Velocimetry (PDV) Workshop held at Sandia National Laboratory, Albuquerque, New Mexico, October 22-23, 2012

Design of a Thermal Imaging Diagnostic Using 90-Degree, Off-Axis, Parabolic Mirrors

Thermal imaging is an important, though challenging, diagnostic for shockwave experiments. Shock-compressed materials undergo transient temperature changes that cannot be recorded with standard (greater than ms response time) infrared detectors. A further complication arises when optical elements near the experiment are destroyed. We have designed a thermal-imaging system for studying shock temperatures produced inside a gas gun at Sandia National Laboratories. Inexpensive, diamond-turned, parabolic mirrors relay an image of the shocked target to the exterior of the gas gun chamber through a sapphire vacuum port. The 3000–5000-nm portion of this image is directed to an infrared camera which acquires a snapshot of the target with a minimum exposure time of 150 ns. A special mask is inserted at the last intermediate image plane, to provide dynamic thermal background recording during the event. Other wavelength bands of this image are split into high-speed detectors operating at 900–1700 nm, and at 1700–3000 nm for timeresolved pyrometry measurements. This system incorporates 90-degree, off-axis parabolic mirrors, which can collect low f/# light over a broad spectral range, for high-speed imaging. Matched mirror pairs must be used so that aberrations cancel. To eliminate image plane tilt, proper tip-to-tip orientation of the parabolic mirrors is required. If one parabolic mirror is rotated 180 degrees about the optical axis connecting the pair of parabolic mirrors, the resulting image is tilted by 60 degrees. Different focal-length mirrors cannot be used to magnify the image without substantially sacrificing image quality. This paper analyzes performance and aberrations of this imaging diagnostic

Photonic Doppler velocimetry probe used to measure grain boundaries of dynamic shocked materials

Author Institution: Mission Support and Test Services, LLC; Los Alamos National LaboratorySlides presented at the 2018 Photonic Doppler Velocimetry (PDV) Users Workshop, Drury Plaza Hotel, Santa Fe, New Mexico, May 16-18, 2018

High-Resolution UV Relay Lens for Particle Size Distribution Measurements Using Holography

Shock waves passing through a metal sample can produce ejecta particulates at a metal-vacuum interface. Holography records particle size distributions by using a high-power, short-pulse laser to freeze particle motion. The sizes of the ejecta particles are recorded using an in-line Fraunhofer holography technique. Because the holographic plate would be destroyed in an energetic environment, a high-resolution lens has been designed to relay the interference fringes to a safe environment. Particle sizes within a 12-mm-diameter, 5-mm-thick volume are recorded onto holographic film. To achieve resolution down to 0.5 μm, ultraviolet laser (UV) light is needed. The design and assembly of a nine-element lens that achieves >2000 lp/mm resolution and operates at f/0.89 will be described. To set up this lens system, a doublet lens is temporarily attached that enables operation with 532-nm laser light and 1100 lp/mm resolution. Thus, the setup and alignment are performed with green light, but the dynamic recording is done with UV light. During setup, the 532-nm beam provides enough focus shift to accommodate the placement of a resolution target outside the ejecta volume; this resolution target does not interfere with the calibrated wires and pegs surrounding the ejecta volume. A television microscope archives images of resolution patterns that prove that the calibration wires, interference filter, holographic plate, and relay lenses are in their correct positions. Part of this lens is under vacuum, at the point where the laser illumination passes through a focus. Alignment and tolerancing of this high-resolution lens will be presented, and resolution variation through the 5-mm depth of field will be discussed

Design, construction, alignment, and calibration of a compact velocimetry experiment

A velocimetry experiment has been designed to measure shock properties for small, cylindrical, metal targets (8 mm diameter × 2 mm thick). A target is accelerated by high explosives, caught, then retrieved for later inspection. The target is expected to move at a velocity of 0.1 to 3 km/sec. The complete experiment canister is ~105 mm in diameter and 380 mm long. Optical velocimetry diagnostics include the Velocity Interferometer System for Any Reflector (VISAR) and photon Doppler velocimetry (PDV). The packaging of the velocity diagnostics is not allowed to interfere with the foam catchment or an X-ray imaging diagnostic. Using commercial lenses, a single optical relay collects Doppler-shifted light for both VISAR and PDV. The use of fiber optics allows measurement of point velocities on the target surface for accelerations lasting for 3 mm of travel. Operating at 532 nm, the VISAR has separate illumination fibers requiring alignment. The PDV diagnostic operates at 1550 nm but is aligned and calibrated at 670 nm. VISAR and PDV diagnostics are complimentary measurements that image spots in close proximity on the target surface. Because the optical relay uses commercial glass, optical fibers’ axial positions are offset to compensate for chromatic aberrations. The optomechanical design requires careful attention to fiber management, mechanical assembly and disassembly, foam catchment design, and X-ray diagnostic field of view.Calibration and alignment data are archived at each assembly sequence stage. The photon budgets for the VISAR and PDV diagnostics are separately estimated

A Unique Human-Fox Burial from a Pre-Natufian Cemetery in the Levant (Jordan)

New human burials from northern Jordan provide important insights into the appearance of cemeteries and the nature of human-animal relationships within mortuary contexts during the Epipalaeolithic period (c. 23,000–11,600 cal BP) in the Levant, reinforcing a socio-ideological relationship that goes beyond predator-prey. Previous work suggests that archaeological features indicative of social complexity occur suddenly during the latest Epipalaeolithic phase, the Natufian (c. 14,500–11,600 cal BP). These features include sedentism, cemeteries, architecture, food production, including animal domestication, and burials with elaborate mortuary treatments. Our findings from the pre-Natufian (Middle Epipalaeolithic) cemetery of ‘Uyun al-Hammam demonstrate that joint human-animal mortuary practices appear earlier in the Epipalaeolithic. We describe the earliest human-fox burial in the Near East, where the remains of dogs have been found associated with human burials at a number of Natufian sites. This is the first time that a fox has been documented in association with human interments pre-dating the Natufian and with a particular suite of grave goods. Analysis of the human and animal bones and their associated artefacts provides critical data on the nature and timing of these newly-developing relationships between people and animals prior to the appearance of domesticated dogs in the Natufian

Risk Factors for and Prediction of Post-Intubation Hypotension in Critically Ill Adults: A Multicenter Prospective Cohort Study

OBJECTIVE: Hypotension following endotracheal intubation in the ICU is associated with poor outcomes. There is no formal prediction tool to help estimate the onset of this hemodynamic compromise. Our objective was to derive and validate a prediction model for immediate hypotension following endotracheal intubation. METHODS: A multicenter, prospective, cohort study enrolling 934 adults who underwent endotracheal intubation across 16 medical/surgical ICUs in the United States from July 2015-January 2017 was conducted to derive and validate a prediction model for immediate hypotension following endotracheal intubation. We defined hypotension as: 1) mean arterial pressure \u3c 65 mmHg; 2) systolic blood pressure \u3c 80 mmHg and/or decrease in systolic blood pressure of 40% from baseline; 3) or the initiation or increase in any vasopressor in the 30 minutes following endotracheal intubation. RESULTS: Post-intubation hypotension developed in 344 (36.8%) patients. In the full cohort, 11 variables were independently associated with hypotension: increasing illness severity; increasing age; sepsis diagnosis; endotracheal intubation in the setting of cardiac arrest, mean arterial pressure \u3c 65 mmHg, and acute respiratory failure; diuretic use 24 hours preceding endotracheal intubation; decreasing systolic blood pressure from 130 mmHg; catecholamine and phenylephrine use immediately prior to endotracheal intubation; and use of etomidate during endotracheal intubation. A model excluding unstable patients’ pre-intubation (those receiving catecholamine vasopressors and/or who were intubated in the setting of cardiac arrest) was also developed and included the above variables with the exception of sepsis and etomidate. In the full cohort, the 11 variable model had a C-statistic of 0.75 (95% CI 0.72, 0.78). In the stable cohort, the 7 variable model C-statistic was 0.71 (95% CI 0.67, 0.75). In both cohorts, a clinical risk score was developed stratifying patients’ risk of hypotension. CONCLUSIONS: A novel multivariable risk score predicted post-intubation hypotension with accuracy in both unstable and stable critically ill patients. STUDY REGISTRATION: Clinicaltrials.gov identifier: NCT02508948 and Registered Report Identifier: RR2-10.2196/11101