565 research outputs found
Why the Bradley aberration cannot be used to measure absolute speeds. A comment
In a recent article in this journal [G. Sardin, Measure of the absolute speed
through the Bradley aberration of light beams on a three-axis frame, Europhys.
Lett. 53 (2001) 310], Sardin proposed to use the Bradley aberration of light
for the construction of a speedometer capable of measuring absolute speeds. The
purpose of this comment is to show that the device would not work.Comment: 2 pages, LaTeX, accepted for Europhysics Letter
Amplitude equations for systems with long-range interactions
We derive amplitude equations for interface dynamics in pattern forming
systems with long-range interactions. The basic condition for the applicability
of the method developed here is that the bulk equations are linear and solvable
by integral transforms. We arrive at the interface equation via long-wave
asymptotics. As an example, we treat the Grinfeld instability, and we also give
a result for the Saffman-Taylor instability. It turns out that the long-range
interaction survives the long-wave limit and shows up in the final equation as
a nonlocal and nonlinear term, a feature that to our knowledge is not shared by
any other known long-wave equation. The form of this particular equation will
then allow us to draw conclusions regarding the universal dynamics of systems
in which nonlocal effects persist at the level of the amplitude description.Comment: LaTeX source, 12 pages, 4 figures, accepted for Physical Review
Phase Field Modeling of Fast Crack Propagation
We present a continuum theory which predicts the steady state propagation of
cracks. The theory overcomes the usual problem of a finite time cusp
singularity of the Grinfeld instability by the inclusion of elastodynamic
effects which restore selection of the steady state tip radius and velocity. We
developed a phase field model for elastically induced phase transitions; in the
limit of small or vanishing elastic coefficients in the new phase, fracture can
be studied. The simulations confirm analytical predictions for fast crack
propagation.Comment: 5 pages, 11 figure
Pattern formation in directional solidification under shear flow. I: Linear stability analysis and basic patterns
An asymptotic interface equation for directional solidification near the
absolute stabiliy limit is extended by a nonlocal term describing a shear flow
parallel to the interface. In the long-wave limit considered, the flow acts
destabilizing on a planar interface. Moreover, linear stability analysis
suggests that the morphology diagram is modified by the flow near the onset of
the Mullins-Sekerka instability. Via numerical analysis, the bifurcation
structure of the system is shown to change. Besides the known hexagonal cells,
structures consisting of stripes arise. Due to its symmetry-breaking
properties, the flow term induces a lateral drift of the whole pattern, once
the instability has become active. The drift velocity is measured numerically
and described analytically in the framework of a linear analysis. At large flow
strength, the linear description breaks down, which is accompanied by a
transition to flow-dominated morphologies, described in a companion paper.
Small and intermediate flows lead to increased order in the lattice structure
of the pattern, facilitating the elimination of defects. Locally oscillating
structures appear closer to the instability threshold with flow than without.Comment: 20 pages, Latex, accepted for Physical Review
Fracture in Mode I using a Conserved Phase-Field Model
We present a continuum phase-field model of crack propagation. It includes a
phase-field that is proportional to the mass density and a displacement field
that is governed by linear elastic theory. Generic macroscopic crack growth
laws emerge naturally from this model. In contrast to classical continuum
fracture mechanics simulations, our model avoids numerical front tracking. The
added phase-field smoothes the sharp interface, enabling us to use equations of
motion for the material (grounded in basic physical principles) rather than for
the interface (which often are deduced from complicated theories or empirical
observations). The interface dynamics thus emerges naturally. In this paper, we
look at stationary solutions of the model, mode I fracture, and also discuss
numerical issues. We find that the Griffith's threshold underestimates the
critical value at which our system fractures due to long wavelength modes
excited by the fracture process.Comment: 10 pages, 5 figures (eps). Added 2 figures and some text. Removed one
section (and a figure). To be published in PR
Influence of uniaxial stress on the lamellar spacing of eutectics
Directional solidification of lamellar eutectic structures submitted to
uniaxial stress is investigated. In the spirit of an approximation first used
by Jackson and Hunt, we calculate the stress tensor for a two-dimensional
crystal with triangular surface, using a Fourier expansion of the Airy
function. crystal with triangular surface in contact with its melt, given that
a uniaxial external stress is applied. The effect of the resulting change in
chemical potential is introduced into the standard model for directional
solidification of a lamellar eutectic. This calculation is motivated by an
observation, made recently [I. Cantat, K. Kassner, C. Misbah, and H.
M\"uller-Krumbhaar, Phys. Rev. E, in press] that the thermal gradient produces
similar effects as a strong gravitational field in the case of dilute-alloy
solidification. Therefore, the coupling between the Grinfeld and the
Mullins-Sekerka instabilities becomes strong, as the critical wavelength of the
former instability gets reduced to a value close to that of the latter.
Analogously, in the case of eutectics, the characteristic length scale of the
Grinfeld instability should be reduced to a size not extremely far from typical
lamellar spacings. In a Jackson-Hunt like approach we average the undercooling,
including the stress term, over a pair of lamellae. Following Jackson and Hunt,
we assume the selected wavelength to be determined by the minimum undercooling
criterion and compute its shift due to the external stress. we realize the
shifting of the wavelength by the application of external stress. In addition,
we find that in general the volume fraction of the two solid phases is changed
by uniaxial stress. Implications for experiments on eutectics are discussed.Comment: 8 pages RevTex, 6 included ps-figures, accepted for Phys. Rev.
Effect of gaseous and solid simulated jet plumes on an 040A space shuttle launch configuration at m=1.6 to 2.2
The effect of plume-induced flow separation and aspiration effects due to operation of both orbiter and the solid rocket motors on a 0.019-scale model of the launch configuration of the Space Shuttle Vehicle is determined. Longitudinal and lateral-directional stability data were obtained at Mach numbers of 1.6, 2.0, and 2.2 with and without the engines operating. The plumes exiting from the engines were simulated by a cold-gas jet supplied by an auxiliary 200-atm air supply system and solid-body plume simulators. The aerodynamic effects produced by these two simulation procedures are compared. The parameters most significantly affected by the jet plumes are pitching moment, elevon control effectiveness, axial force, and orbiter wing loads. The solid rocket motor (SRM) plumes have the largest effect on the aerodynamic characteristics. The effect of the orbiter plumes in combination with the SRM plumes is also significant. Variations in the nozzle design parameters and configuration changes can reduce the jet plume-induced aerodynamic effects
- …