15 research outputs found
Transferring ART research into education in Brazil
The aim of this study was to evaluate the teaching of the Atraumatic Restorative Treatment (ART) approach in Brazilian dental schools. MATERIALS AND METHODS: A questionnaire on this subject was sent to Pediatric Dentistry, Operative Dentistry and Public Health Dentistry professors. The questions approached the followig subjects: the method used to teach ART, the time spent on its teaching, under which discipline it is taught, for how many years ART has been taught and its effect on the DMFT index. RESULTS: A total of 70 out of 202 dental schools returned the questionnaire. The ART approach is taught in the majority of the Brazilian dental schools (96.3%), and in most of these schools it is taught both in theory and in clinical practice (62.9%). The majority (35.3%) of professors teach ART for 8 hours, and most often as part of the Pediatric Dentistry discipline (67.6%). It has been taught for the last 7 to 10 years in 34.3% of dental schools. Most professors did not observe a change in the DMFT index with this approach. There is a diversity in the teaching of ART in Brazil in terms of the number of hours spent, the teaching method (theory and practice), and the disciplines involved in its teaching. CONCLUSIONS: It is necessary to address the training of professors in the ART approach for the whole country. An educational model is proposed whereby a standard ART module features as part of other preventive and restorative caries care educational modules. This will facilitate and standardize the introduction and adoption of the ART approach in undergraduate education in Brazil
In vitro cytotoxicity of white MTA, MTA Fillapex® and Portland cement on human periodontal ligament fibroblasts
The aim of this study was to compare the in vitro cytotoxicity of white mineral trioxide aggregate (MTA), MTA Fillapex® and Portland cement (PC) on human cultured periodontal ligament fibroblasts. Periodontal ligament fibroblast culture was established and the cells were used for cytotoxic tests after the fourth passage. Cell density was set at 1.25 X10 4 cells/well in 96-well plates. Endodontic material extracts were prepared by placing sealer/cement specimens (5X3mm) in 1mL of culture medium for 72 h. The extracts were then serially two-fold diluted and inserted into the cell-seeded wells for 24, 48 and 72 h. MTT assay was employed for analysis of cell viability. Cell supernatants were tested for nitric oxide using the Griess reagent system. MTA presented cytotoxic effect in undiluted extracts at 24 and 72 h. MTA Fillapex® presented the highest cytotoxic levels with important cell viability reduction for pure extracts and at ½ and ¼ dilutions. In this study, PC did not induce alterations in fibroblast viability. Nitric oxide was detected in extract-treated cell supernatants and also in the extracts only, suggesting presence of nitrite in the soluble content of the tested materials. In the present study, MTA Fillapex displayed the highest cytotoxic effect on periodontal ligament fibroblasts followed by white MTA and PC.FAPESP #2007/00306-1FAPESP #2005/60167-
Cytotoxicity and biocompatibility of direct and indirect pulp capping materials
There are several studies about the cytotoxic effects of dental materials in contact with the pulp tissue, such as calcium hydroxide (CH), adhesive systems, resin composite and glass ionomer cements. The aim of this review article was to summarize and discuss the cytotoxicity and biocompatibility of materials used for protection of the dentin-pulp complex, some components of resin composites and adhesive systems when placed in direct or indirect contact with the pulp tissue. A large number of dental materials present cytotoxic effects when applied close or directly to the pulp, and the only material that seems to stimulate early pulp repair and dentin hard tissue barrier formation is CH
Social disparity and oral health
There is a clear reported association between social disparity and oral health, for example, between dental caries and malnutrition in children. This fact is detected in several studies, and also found amongst the Brazilian population. However, several efforts have been made to improve the quality of life of the population and to achieve the 2015 Millennium Development Goals. Oral health is a branch to be improved among these goals. The Brazilian experience has been drawing the attention of authorities, insofar as there have been direct improvements in oral health through state oral health programs, and also indirect results by improving the quality of life of the population. Included within the Brazilian oral health programs are the Family Health Program and Smiling Brazil Program. The former is a global healthcare program which involves primary oral healthcare, while the latter is a specialized oral care program. Among the social programs that would indirectly improve oral health are Family Stipend and the Edmond and Lily Safra International Institute of Neuroscience of Natal (ELS-IINN). In conclusion, although oral health problems are related to socioeconomic factors, the implementation of primary oral health programs and programs to improve the population's quality of life may directly or indirectly improve the oral health scenario. This fact is being observed in Brazil, where the oral health policies have changed, and social programs have been implemented
How erosive drinks and enzyme inhibitors impact bond strength to dentin
Concern has been raised about the bonding of restorative procedures to an erosive lesion, given the change in organic and inorganic composition and structure of this substrate. This in vitro study evaluated the effect of erosive drinks and an enzyme inhibitor (2% chlorhexidine digluconate – 2% CHX) on bond strength to dentin. Sixty sound human third molars were selected, and the occlusal enamel was flattened, exposing the dentin surface. The specimens were randomly divided into three groups: AS-Artificial saliva (control group), RC- Regular Cola and ZC- Zero Cola. Twenty specimens were immersed in their respective solution for 1 minute, 3 times a day, over the course of 5 days. After acid etching and before bonding with Adper Single Bond 2, half of the samples of each group (n = 10) were treated with 2% CHX, whereas the other half (n = 10) were not, forming the control group (CONV). All the specimens were restored with Filtek Z250 composite resin filled in Tygon tubes (0.48 mm2), yielding six microcylinders for microshear bond strength testing. Three composite resin microcylinders of each specimen were tested after 1 month, and the remaining microcylinders were tested after 6 months. Failure modes were determined using a stereomicroscope (40x). The data were statistically analyzed by three-way ANOVA and Tukey tests (α = 0.05). Overall bonding was reduced after 6 months, regardless of treatment. The 2% CHX enhanced bond strength after 1 month only in the ZC group, and did not enhance bonding performance to demineralized dentin by erosive protocol after 6 months in any group
Randomized clinical trial of encapsulated and hand-mixed glass-ionomer ART restorations: one-year follow-up
<div><p>Abstract Objective This prospective, randomized, split-mouth clinical trial evaluated the clinical performance of conventional glass ionomer cement (GIC; Riva Self-Cure, SDI), supplied in capsules or in powder/liquid kits and placed in Class I cavities in permanent molars by the Atraumatic Restorative Treatment (ART) approach. Material and Methods A total of 80 restorations were randomly placed in 40 patients aged 11-15 years. Each patient received one restoration with each type of GIC. The restorations were evaluated after periods of 15 days (baseline), 6 months, and 1 year, according to ART criteria. Wilcoxon matched pairs, multivariate logistic regression, and Gehan-Wilcoxon tests were used for statistical analysis. Results Patients were evaluated after 15 days (n=40), 6 months (n=34), and 1 year (n=29). Encapsulated GICs showed significantly superior clinical performance compared with hand-mixed GICs at baseline (p=0.017), 6 months (p=0.001), and 1 year (p=0.026). For hand-mixed GIC, a statistically significant difference was only observed over the period of baseline to 1 year (p=0.001). Encapsulated GIC presented statistically significant differences for the following periods: 6 months to 1 year (p=0.028) and baseline to 1 year (p=0.002). Encapsulated GIC presented superior cumulative survival rate than hand-mixed GIC over one year. Importantly, both GICs exhibited decreased survival over time. Conclusions Encapsulated GIC promoted better ART performance, with an annual failure rate of 24%; in contrast, hand-mixed GIC demonstrated a failure rate of 42%.</p></div
Dentin bond strength evaluation between a conventional and universal adhesive using etch-and-rinse strategy
Aim: The aim of this study was to compare the microtensile bond strength (μTBS) and the characteristics of the adhesive interface of Scotchbond Universal - SU – etch-and-rise mode (3M ESPE) and Adper Scotchbond Multi-Purpose - MP (3M ESPE) to dentin over time. Methods: Class I cavity preparations were performed in 60 human molars that were randomly divided according to the dentin bonding system (DBS) used (n=30): (1) Acid conditioning + SU and (2) Acid conditioning + MP. For bonding strength (BS) analysis, 30 teeth (n = 15) were sectioned into sticks and submitted to the microtensile test in a universal testing machine after 24 hours and 12 months. The adhesive interface of the others 30 teeth was analyzed in a confocal microscope after 24 hours and 12 months. The data of μTBS were analyzed by two-way repeated measures ANOVA and Tukey’s HSD (α = 0.05). Results: SU presented the lowest DBS compared to MP (p=0.000). Time did not influenced DBS for both adhesive systems (p=0.177). Confocal microscopy analysis showed no cracks between both adhesive systems tested. Conclusion: The results indicate that MP - μTBS showed a better performance compared to SU in total-etch mode
CCL3 and CXCL12 production in vitro by dental pulp fibroblasts from permanent and deciduous teeth stimulated by Porphyromonas gingivalis LPS
OBJECTIVE: The aim of this study was to compare the production of the chemokines CCL3 and CXCL12 by cultured dental pulp fibroblasts from permanent (PDPF) and deciduous (DDPF) teeth under stimulation by Porphyromonas gingivalis LPS (PgLPS).
MATERIAL AND METHODS: Primary culture of fibroblasts from permanent (n=3) and deciduous (n=2) teeth were established using an explant technique. After the fourth passage, fibroblasts were stimulated by increasing concentrations of PgLPS (0-10 µg/mL) at 1, 6 and 24 h. The cells were tested for viability through MTT assay, and production of the chemokines CCL3 and CXCL12 was determined through ELISA. Comparisons among samples were performed using One-way ANOVA for MTT assay and Two-way ANOVA for ELISA results.
RESULTS: Cell viability was not affected by the antigen after 24 h of stimulation. PgLPS induced the production of CCL3 by dental pulp fibroblasts at similar levels for both permanent and deciduous pulp fibroblasts. Production of CXCL12, however, was significantly higher for PDPF than DDPF at 1 and 6 h. PgLPS, in turn, downregulated the production of CXCL12 by PDPF but not by DDPF.
CONCLUSION: These data suggest that dental pulp fibroblasts from permanent and deciduous teeth may present a differential behavior under PgLPS stimulation