Evolution and Move toward Fifth-Generation Antenna

With the introduction of various antennas in the field of antenna technology, most of the constraints related to the transmission and receiving of the signals at different intervals have been resolved. By the rapid growth in industry and consequently high demands in the communication arena, the conventional antennas are unable to respond to these extended requirements. However, those initial antennas were suitably used in the field of technology. In the recent decades, by introducing new antenna technologies such as metamaterial structures, substrate integrated waveguide (SIW) structures and microstrip antennas with various feeding networks could meet the demands of the current systems. As stated before, in the frequency ranges of below 30 GHz, antenna size and bandwidth are of the important issues, so that novel antennas can be created in low frequencies, which are able to achieve reliable radiation properties when combined with new multiband antennas. Generally, transmission lines are practical in low frequencies and short distances, while higher frequencies are mainly used due to bandwidth goals. This chapter is organized into three subsections related to the 5G wireless communication systems: antennas below 15 GHz or accordingly antennas with wavelength less than 1/20; antennas operating between 15 and 30 GHz; higher frequency antennas or millimeter-wave antennas, which are desired for above 40 GHz

Low-Loss and Dual-Band Filter Inspired by Glide Symmetry Principle Over Millimeter-Wave Spectrum for 5G Cellular Networks

This paper focuses on designing a dual-band, bandpass filter configuration inspired by glide-symmetric structures in a single plane. Geometry configuration of elliptical slots on both sides of single substrate generally affects electromagnetic fields as well as rejection bands. Easy fabrication with misalignment avoidance during assembly procedure unlike conventional structures based on gap waveguide technology, make them appropriate to use in electromagnetic devices. Parametric study on dispersion characteristics is carried out in this article to find out how rejection-bands are offered through breaking the symmetry. A method for producing symmetry is also suggested, which may be helpful for reconfigurable devices. Moreover, equivalent circuit model is demonstrated to get insight of the mechanism of the presented glide symmetry scheme. The transmission frequency ranges of two passbands with center frequencies of 19.74 GHz and 28.233 GHz are shown by the measured and calculated S- parameters of five unit-cell structures

Low-loss and dual-band filter inspired by glide symmetry principle over millimeter-wave spectrum for 5G cellular networks

Summary: This paper focuses on designing a dual-band, bandpass filter configuration inspired by glide-symmetric structures in a single plane. Geometry configuration of elliptical slots on both sides of single substrate generally affects electromagnetic fields as well as rejection bands. Easy fabrication with misalignment avoidance during assembly procedure unlike conventional structures based on gap waveguide technology, make them appropriate to use in electromagnetic devices. Parametric study on dispersion characteristics is carried out in this article to find out how rejection-bands are offered through breaking the symmetry. A method for producing symmetry is also suggested, which may be helpful for reconfigurable devices. Moreover, equivalent circuit model is demonstrated to get insight of the mechanism of the presented glide symmetry scheme. The transmission frequency ranges of two passbands with center frequencies of 19.74 GHz and 28.233 GHz are shown by the measured and calculated S- parameters of five unit-cell structures