1,641 research outputs found
Observation of a linear temperature dependence of the critical current density in a Ba_{0.63}K_{0.37}BiO_3 single crystal
For a Ba_{0.63}K_{0.37}BiO_3 single crystal with T_c=31 K, H_{c1}=750 Oe at 5
K, and dimensions 3x3x1 mm^3, the temperature and field dependences of magnetic
hysteresis loops have been measured within 5-25 K in magnetic fields up to 6
Tesla. The critical current density is J_c(0)=1.5 x 10^5 A/cm^2 at zero field
and 1 x 10^5 A/cm^2 at 1 kOe at 5 K. J_c decreases exponentially with
increasing field up to 10 kOe. A linear temperature dependence of J_c is
observed below 25 K, which differs from the exponential and the power-law
temperature dependences in high-Tc superconductors including the BKBO. The
linear temperature dependence can be regarded as an intrinsic effect in
superconductors.Comment: RevTex, Physica C Vol. 341-348, 729 (2000
Modeling tidal current around Mokpo, the South Western coastal zone of Korea
This study provide modeling of tidal circulation around the Mokpo coastal zone (MC) using unstructured triangular horizontal grid by which high resolution is concentrated in the local region that reaches to 100 m. For this simulation, the 3D finite-volume ocean model FVCOM is applied for the numerical simulation. Only the astronomical tidal constituent M2 and its harmonic M4 are considered. By expanding open boundary to the shelf break of the East China Sea, only M2 elevation was specified on the open boundaries, and the generation of M4 tide around MC was observed, which is the representative criteria for the accuracy of the shallow water tide simulation. Around the intertidal zone of MC, wet/dry point treatment method incorporated in FVCOM was also used and tested its applicability in the level of resolution of this model
Mechanism of Electromigration Failure in Al Thin Film Interconnects Containing Sc
In order to understand the role of Sc on electromigration (EM) failure, Al interconnects with 0.1 and 0.3 wt.% Sc sere tested as a function of post-pattern annealing time. In response to the evolution of the line structure, the statistics of lifetime evolved. While the addition of Sc greatly reduces the rate of evolution of the failure statistics because the grain growth rate decreases, the MTF variation was found to be very similar to that of pure Al. These observations seem to show that Sc has little influence on the kinetics of Al EM; however, it has some influence on the EM resistance of the line since it is an efficient grain refiner. Unlike Cu in Al, Sc does not seem to migrate, which may explain its lack of influence on the kinetics of Al EM
Tibetan sheep are better able to cope with low energy intake than Small-tailed Han sheep due to lower maintenance energy requirements and higher nutrient digestibilities
Tibetan sheep are indigenous to the Qinghai-Tibetan Plateau (QTP) and are well-adapted to and even thrive under the harsh alpine conditions. Small-tailed Han sheep were introduced to the plateau because of their high prolificacy and are maintained mainly in feedlots. Because of their different backgrounds, we hypothesised that Tibetan and Small-tailed Han sheep would differ in their utilization of energy intake and predicted that Tibetan sheep would cope better with low energy intake than Small-tailed Han sheep. To test this prediction, we determined nutrient digestibilities, energy requirements for maintenance and blood metabolite and hormone concentrations involved in energy metabolism in these breeds. Sheep of each breed (n = 24 of each, all wethers and 1.5 years of age) were distributed randomly into one of four groups and offered ad libitum diets of different digestible energy (DE) densities: 8.21, 9.33, 10.45 and 11.57 MJ DE/kg Dry matter (DM). Following 42 d of measuring feed intake, a 1-week digestion and metabolism experiment was done. DM intakes did not differ between breeds nor among treatments but, by design, DE intake increased linearly in both breeds as dietary energy level increased (P < 0.001). The average daily gain (ADG) was significantly greater in the Tibetan than Small-tailed Han sheep (P = 0.003) and increased linearly in both breeds (P < 0.001). In addition, from the regression analysis of ADG on DE intake, daily DE maintenance requirements were lower for Tibetan than for Small-tailed Han sheep (0.41 vs 0.50 MJ/BW0.75, P < 0.05). The DE and metabolizable energy (ME) digestibilities were higher in the Tibetan than Small-tailed Han sheep (P < 0.001) and increased linearly as the energy level increased in the diet (P < 0.001). At the lowest energy treatment, Tibetan sheep when compared with Small-tailed Han sheep, had: 1) higher serum glucose and glucagon, but lower insulin concentrations (P < 0.05), which indicated a higher capacity for gluconeogenesis and ability to regulate glucose metabolism; and 2) higher non-esterified fatty acids (NEFA) and lower very low density lipoprotein (VLDL) and triglyceride (TG) concentrations (P < 0.05), which indicated a higher capacity for NEFA oxidation but lower ability for triglyceride (TG) synthesis. We concluded that our prediction was supported as these differences between breeds conferred an advantage for Tibetan over Small-tailed Han sheep to cope better with low energy diets
Photoelectron diffraction: from phenomenological demonstration to practical tool
The potential of photoelectron diffraction—exploiting the coherent interference of directly-emitted and elastically scattered components of the photoelectron wavefield emitted from a core level of a surface atom to obtain structural information—was first appreciated in the 1970s. The first demonstrations of the effect were published towards the end of that decade, but the method has now entered the mainstream armoury of surface structure determination. This short review has two objectives: First, to outline the way that the idea emerged and the way this evolved in my own collaboration with Neville Smith and his colleagues at Bell Labs in the early years: Second, to provide some insight into the current state-of-the art in application of (scanned-energy mode) photoelectron diffraction to address two key issue in quantitative surface structure determination, namely, complexity and precision. In this regard a particularly powerful aspect of photoelectron diffraction is its elemental and chemical-state specificity
Photoemission and x-ray absorption spectroscopy study of electron-doped colossal magnetoresistance manganite: La0.7Ce0.3MnO3 film
The electronic structure of La0.7Ce0.3MnO3 (LCeMO) thin film has been
investigated using photoemission spectroscopy (PES) and x-ray absorption
spectroscopy (XAS). The Ce 3d core-level PES and XAS spectra of LCeMO are very
similar to those of CeO2, indicating that Ce ions are far from being trivalent.
A very weak 4f resonance is observed around the Ce 4d 4f absorption edge,
suggesting that the localized Ce 4f states are almost empty in the ground
state. The Mn 2p XAS spectrum reveals the existence of the Mn(2+) multiplet
feature, confirming the Mn(2+)-Mn(3+) mixed-valent states of Mn ions in LCeMO.
The measured Mn 3d PES/XAS spectra for LCeMO agrees reasonably well with the
calculated Mn 3d PDOS using the LSDA+U method. The LSDA+U calculation predicts
a half-metallic ground state for LCeMO.Comment: 7 pages, 7 figure
Numerical studies towards practical large-eddy simulation
Large-eddy simulation developments and validations are presented for an
improved simulation of turbulent internal flows. Numerical methods are proposed
according to two competing criteria: numerical qualities (precision and
spectral characteristics), and adaptability to complex configurations. First,
methods are tested on academic test-cases, in order to abridge with fundamental
studies. Consistent results are obtained using adaptable finite volume method,
with higher order advection fluxes, implicit grid filtering and "low-cost"
shear-improved Smagorinsky model. This analysis particularly focuses on mean
flow, fluctuations, two-point correlations and spectra. Moreover, it is shown
that exponential averaging is a promising tool for LES implementation in
complex geometry with deterministic unsteadiness. Finally, adaptability of the
method is demonstrated by application to a configuration representative of
blade-tip clearance flow in a turbomachine
Anomalous Scaling of Structure Functions and Dynamic Constraints on Turbulence Simulations
The connection between anomalous scaling of structure functions
(intermittency) and numerical methods for turbulence simulations is discussed.
It is argued that the computational work for direct numerical simulations (DNS)
of fully developed turbulence increases as , and not as
expected from Kolmogorov's theory, where is a large-scale Reynolds number.
Various relations for the moments of acceleration and velocity derivatives are
derived. An infinite set of exact constraints on dynamically consistent subgrid
models for Large Eddy Simulations (LES) is derived from the Navier-Stokes
equations, and some problems of principle associated with existing LES models
are highlighted.Comment: 18 page
Adsorption of Reactive Particles on a Random Catalytic Chain: An Exact Solution
We study equilibrium properties of a catalytically-activated annihilation reaction taking place on a one-dimensional chain of length () in which some segments (placed at random, with mean concentration
) possess special, catalytic properties. Annihilation reaction takes place,
as soon as any two particles land onto two vacant sites at the extremities
of the catalytic segment, or when any particle lands onto a vacant site on
a catalytic segment while the site at the other extremity of this segment is
already occupied by another particle. Non-catalytic segments are inert with
respect to reaction and here two adsorbed particles harmlessly coexist. For
both "annealed" and "quenched" disorder in placement of the catalytic segments,
we calculate exactly the disorder-average pressure per site. Explicit
asymptotic formulae for the particle mean density and the compressibility are
also presented.Comment: AMSTeX, 27 pages + 4 figure
CFD analysis of liquid stream going through the wire-screen mesh
Paper presented at the 5th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, South Africa, 1-4 July, 2007.Wire-screen mesh is normally used for the removal of
particles from a liquid stream. Here we consider a system
where fluid passes wire-screen mesh perpendicularly. The
configurations of wire-screen mesh such as diameter and shape
factor of wire affect the stream of fluid going through the
screen. In this study, we performed a theoretical approach to
the relation between wire mesh and fluid stream with
computational fluid dynamics (CFD). FLUENT is used for the
simulation. Head loss can be estimated by Rose equation when
the stream passes through the wire-mesh (Rose 1945). The drag
coefficient (CD) varies with the stream types. The other
parameters depend on a specific mesh, velocity and pressure.
In the experiment we used a screen of 50 mesh-size and water
as a fluid. The pressure drop during water flow was determined.
The average and maximum velocities of water were calculated.
On the basis of these values, we derived a proportional factor
between the velocity of fluid and head loss that can estimate
CD.cs201
- …