MASS TRANSFER CORRELATION FOR THE REMOVAL OF COPPER IONS FROM WASTEWATER

One of the biggest problems with ore processing in extractive metallurgical industries is the high toxicity of the heavy metals waste content (e.g., copper, lead, nickel and chrome). This work investigates the copper (II) íons removal from aqueous solutions in concentrations up to 1000 ppm. Therefore, a fluidized bed electrolytic reactor was used with flow-by configuration considered as a hopeful method due to the large specific surface area and the high mass transfer rate. The performance of the electrochemical reactor was investigated by using different porosities. Dimensionless Sherwood and Reynolds numbers were correlated to characterize the mass transport properties of the reactor, and they were fitted to the equation Sh = a.Reb.Sc1/3

PARAMETRIC ANALYSES OF AN ABSORPTION REFRIGERATION SYSTEM WITH WATER AND LITHIUM BROMIDE IN STEADY STATE POWERED BY SOLAR ENERGY

The demand of energy utilization is increasing expressively as fast as the development of countries. Besides being available everywhere and virtual inexhaustible, renewable energy is undoubtedly necessary to avoid depleting the planet’s natural resources and global warming. Even considering the primordially environmental importance, the result of no emissions by renewable energy grant attractive also for political and economics statement.  It should be noted the sun is the most abundant primary energy source in the planet and essential for eco-friendly process like photosynthesis, wind action, water cycle as well direct uses as electric and thermal generations. Consequently, nowadays several methodologies have been applied in order to transfer energy between the cycle and its surroundings optimizing for instance the coefficient of performance and heat exchangers. An absorption system is widely applied in these cases due to supply a unique solution for a range of technological problems from solar cooling to steam-driven refrigeration. Alternatively, this article main objective is modulating an absorption refrigeration system (ARS) which uses water-lithium bromide as a working fluid. Therefore, using the software Engineering Equation Solver (EES) is possible to obtain a thermodynamic single effect code that allows elaborating parametric analyses. In other words, performed and verified the influence of some input parameters over other output parameters. First, it was necessary to consider the cycle operating as reversible and steady state. Furthermore, it is assumed that no chemical reactions occur between water and lithium bromide. Thus, in the meantime apply the heat exchangers and a Solar Collector to receive the thermal energy and provide to the refrigeration cycle. Similarly, water from external sources was used to change heat with the fluid water-lithium bromide. Satisfactory results were founded and it enable to calculate and evaluate all system heat transfers rates and coefficient of performance. Almost all of input parameters introduced brought adequate values over output parameters, but the most convenient were: mass balance of water-lithium bromide solution and temperature of cold water from outside source. Clearly, results always can be found but in conclusion this article can be used to verify parameters sensitivity, optimized absorption refrigeration solutions and supply knowledge for future applications

Synthesis of hydroxyapatite, β-Tricalcium phosphate and biphasic calcium phosphate particles to act as local delivery carriers of curcumin: Loading, release and in vitro studies

The successful synthesis of hydroxyapatite (HA), β-Tricalcium phosphate (β-TCP) and two biphasic mixtures (BCPs) of the two was performed by means of wet precipitation. The resulting crystals were characterized and the BCP composition was analyzed and identified as 13% HA-87% TCP and 41% HA-59% TCP. All samples were treated with curcumin solutions, and the degree of curcumin loading and release was found to be proportional to the TCP content of the ceramic. No further cytotoxicity was observed upon MG-63 treatment with the curcumin-loaded ceramics. Finally, the alkaline phosphatase activity of the cells was found to increase with increasing content of TCP, which provides an encouraging proof of concept for the use of curcumin-loaded synthetic biomaterials in bone remodeling. © 2018 by the authors

Geochemical distribution of precious metals in European soil

Contenuti riportati in: Geophysical Research Abstracts, Vol. 16, EGU201

Atmospheric circulation patterns associated with flood occurrence in Crete, Greece

Summarization: Cyclones passing over Crete originate mainly from southwest, west and northwest directions and are of varying size and intensity. A number of these cyclones cause flash floods. In this study, an attempt was made to associate the synoptic scale atmospheric circulation patterns prevailing over the eastern Mediterranean region with flood occurrences in Crete during the period 1991 to 2009. The atmospheric circulation conditions during the flood events were examined based on ERA Interim reanalysis datasets with resolution T255 for spectral field (or about 79km x79km) available from ECMWF. The atmospheric circulation was classified in 6 synoptic types, according to the wind flow and geopotential or pressure pattern at 500 hPa and surface, respectively. The Melbourne University Cyclone Tracking Algorithm was employed to examine the genesis, tracks and depth of these cyclones. It was found that in the vast majority of the flood events the respective cyclones develop over the Adriatic and Ionian seas and then affect the western part of Crete. The cyclones are mainly attributed to the category CLOSE, revealing characteristics of vertically organized baroclinic systems. The cyclones appear their maximum intensity before they affect Crete, mainly over western Mediterranean, implying the synergy of topographical factors. They are mainly characterized by long duration and track length.Παρουσιάστηκε στο: Protection and restoration of the environment X

Vertical structure of synoptic scale cyclones causing flood events in the island of Crete

Μη διαθέσιμη περίληψηNot available summarizationPresented on

GEMAS: adaptation of weathering indices for European agricultural soil derived from carbonate parent materials

Carbonate rocks are very soluble and export elements in dissolved form, and precipitation of secondary phases can occur on a large scale. They leave a strong chemical signature in soil that can be quantified and classified by geochemical indices, and which is useful for evaluating chemical weathering trends (e.g. the Chemical Index of Alteration (CIA) or the Mafic Index of Alteration (MIA)). Due to contrasting chemical compositions and high Ca content, a special adaptation of classical weathering indices is necessary to interpret weathering trends in carbonate-derived soil. In fact, this adaptation seems to be a good tool for distinguishing weathering grades of source-rock types at the continental scale, and allows a more robust interpretation of soil parent-material weathering grade and its impact on the current chemical composition of soil. An increasing degree of weathering results in Al enrichment and Mg loss in addition to Fe loss and Si enrichment, leaching of mobile cations such as Ca and Na, and precipitation of Fe-oxides and hydroxides. The relation between soil weathering status and its spatial distribution in Europe provides important information about the role played by climate and terrain. The geographical distribution of soil chemistry contributes to a better understanding of soil nutritional status, element enrichment, degradation mechanisms, desertification, soil erosion and contamination

GEMAS: Cadmium distribution and its sources in agricultural and grazing land soil of Europe - Original data versus clr-transformed data

Over 4000 agricultural and grazing land soil samples were collected for the “Geochemical Mapping of Agricultural and Grazing Land Soil of Europe” (GEMAS) project carried out by the EuroGeoSurveys Geochemistry Expert Group. The samples were collected in 33 European countries, covering 5.6 million km² at a density of 1 sample site per 2500 km². All samples were analysed by ICP-MS following an aqua regia extraction. The European median Cd concentration is 0.182 mg/kg in agricultural soil and 0.197 mg/kg in grazing land soil (including eastern Ukraine). The Cd map demonstrates the existence of two different geochemical background regimes in northern and southern Europe, separated by the southern limit of the Quaternary glaciation. Cadmium shows two times higher background concentrations in the older and more weathered southern European soil than in northern European soil