464 research outputs found
The root-soil system of Norway spruce subjected to turning moment: resistance as a function of rotation
The reactions of trees to wind, rockfall, and snow and debris flow depend largely on how strong and deformable their anchorage in the soil is. Here, the resistive turning moment M of the root-soil system as a function of the rotation Ï at the stem base plays the major role. M(Ï) describes the behavior of the root-soil system when subject to rotational moment, with the maximum M(Ï) indicating the anchorage strength M a of the tree. We assessed M(Ï) of 66 Norway spruce (Picea abies L. Karst) by pulling them over with a winch. These 45- to 170-year-old trees grew at sites of low and high elevation, with a diameter at breast height DBHâ=â14-69cm and a height Hâ=â9-42m. M(Ï) displayed a strong nonlinear behavior. M a was reached at a lower Ï for large trees than for small trees. Thus overhanging tree weight contributed less to M a for the large trees. Overturning also occurred at a lower Ï for the large trees. These observations show that the rotational ductility of the root-soil system is higher for small trees. M a could be described by four monovariate linear regression equations of tree weight, stem weight, stem volume and DBH 2 ·H (0.80â<âR 2â<â0.95), and Ï at M a, Ï a, by a power law of DBH2·H (R 2â=â0.85). We found significantly higher M a for the low-elevation spruces than for the high-elevation spruces, which were more shallowly anchored, but no significant difference in Ï a. The 66 curves of M(Ï), normalized (n) by M a in M-direction and by Ï a in Ï-direction, yielded one characteristic average curve: . Using and the predictions of M a and Ï a, it is shown that M(Ï) and the curves associated with M(Ï) can be predicted with a relative standard error â€25%. The parameterization of M(Ï) by tree size and weight is novel and provides useful information for predicting with finite-element computer models how trees will react to natural hazard
The root-soil system of Norway spruce subjected to turning moment: resistance as a function of rotation
The reactions of trees to wind, rockfall, and snow and debris flow depend largely on how strong and deformable their anchorage in the soil is. Here, the resistive turning moment M of the rootâsoil system as a function of the rotation Ï at the stem base plays the major role. M(Ï) describes the behavior of the rootâ soil system when subject to rotational moment, with the maximum M(Ï) indicating the anchorage strength M a of the tree. We assessed M(Ï) of 66 Norway spruce (Picea abies L. Karst) by pulling them over with a winch. These 45- to 170-year-old trees grew at sites of low and high elevation, with a diameter at breast height DBHâ=â14â69 cm and a height Hâ=â 9â42 m. M(Ï) displayed a strong nonlinear behavior. M a was reached at a lower Ï for large trees than for small trees. Thus overhanging tree weight contributed less to M a for the large trees. Overturning also occurred at a lower Ï for the large trees. These observations show that the rotational ductility of the rootâsoil system is higher for small trees. M a could be described by four monovariate linear regression equations of tree weight, stem weight, stem volume and DBH ÂČ Â·H (0.80âR ÂČâÏ at M a, Ï a, by a power law of DBHÂČ·H (R ÂČâ=â0.85). We found significantly higher M a for the low-elevation spruces than for the high-elevation spruces, which were more shallowly anchored, but no significant difference in Ï a. The 66 curves of M(Ï), normalized (n) by M a in M-direction and by Ï a in Ï-direction, yielded one characteristic average curve: Mn (Ïn) MÂŻnÏn . Using this average curve and the predictions of M a and Ï a, it is shown that M(Ï) and the curves associated with M(Ï) can be predicted with a relative standard error â€25%. The parameterization of M(Ï) by tree size and weight is novel and provides useful information for predicting with finite-element computer models how trees will react to natural hazards
Characterization of high molecular weight compounds in urban atmospheric particles
International audienceThe chemical nature of a large fraction of ambient organic aerosol particles is not known. However, high molecular weight compounds (often named humic-like substances) have recently been detected by several authors and these compounds seem to account for a significant fraction of the total organic aerosol mass. Due to the unknown chemical structure of these compounds a quantification as well as a determination of their molecular weight is difficult. In this paper we investigate water soluble humic-like substances in ambient urban aerosol using size exclusion chromatography-UV spectroscopy and laser desorption/ionization mass spectrometry. A careful method evaluation shows that both methods complement each other and that both are needed to learn more about the molecular weight distribution and the concentration of humic-like substances. An upper molecular weight limit of humic-like substances of about 700 Da and a concentration of 0.2?1.8 ”g/m3 air can be estimated corresponding to 8?33% of the total organic carbon for an urban background site
Direct Injection Liquid Chromatography High-Resolution Mass Spectrometry for Determination of Primary and Secondary Terrestrial and Marine Biomarkers in Ice Cores
Many atmospheric organic compounds are long-lived enough to be transported from their sources to polar regions and high mountain environments where they can be trapped in ice archives. While inorganic components in ice archives have been studied extensively to identify past climate changes, organic compounds have rarely been used to assess paleo-environmental changes, mainly due to the lack of suitable analytical methods. This study presents a new method of direct injection HPLC-MS analysis, without the need of pre-concentrating the melted ice, for the determination of a series of novel biomarkers in ice-core samples indicative of primary and secondary terrestrial and marine organic aerosol sources. Eliminating a preconcentration step reduces contamination potential and decreases the required sample volume thus allowing a higher time resolution in the archives. The method is characterised by limits of detections (LODs) in the range of 0.01-15 ppb, depending on the analyte, and accuracy evaluated through an interlaboratory comparison. We find that many components in secondary organic aerosols (SOA) are clearly detectable at concentrations comparable to those previously observed in replicate preconcentrated ice samples from the Belukha glacier, Russian Altai Mountains. Some compounds with low recoveries in preconcentration steps are now detectable in samples with this new direct injection method significantly increasing the range of environmental processes and sources that become accessible for paleo-climate studies
Recommended from our members
Comparison of on-line and off-line methods to quantify reactive oxygen species (ROS) in atmospheric aerosols
Atmospheric aerosol particle concentrations have been linked with a wide range of pulmonary and cardio-vascular diseases but the particle properties responsible for these negative health effects are largely unknown. It is often speculated that reactive oxygen species (ROS) present in atmospheric particles lead to oxidative stress in, and ultimately disease of, the human lung. The quantification of ROS is highly challenging because some ROS components such as radicals are highly reactive and therefore short-lived. Thus, fast analysis methods are likely advantageous over methods with a long delay between aerosol sampling and ROS analysis. We present for the first time a detailed comparison of conventional off-line and fast on-line methods to quantify ROS in organic aerosols. For this comparison a new and fast on-line instrument was built and characterized to quantify ROS in aerosol particles with high sensitivity and a limit of detection of 4 nmol H2O2 equivalents per m3 air. ROS concentrations are measured with a time resolution of approximately 15 min, which allows the tracking of fast changing atmospheric conditions. The comparison of the off-line and on-line method shows that, in oxidized organic model aerosol particles, the majority of ROS have a very short lifetime of a few minutes whereas a small fraction is stable for a day or longer. This indicates that off-line techniques, where there is often a delay of hours to days between particle collection and ROS analysis, may severely underestimate true ROS concentrations and that fast on-line techniques are necessary for a reliable ROS quantification in atmospheric aerosol particles and a meaningful correlation with health outcomes.This work was supported by the Natural Environment Research Council (NE/H52449X/1), the Velux Stiftung (Project 593) and an ERC starting grant (grant no. 279405).This is the accepted manuscript version. The final published version is available from Elsevier at http://www.sciencedirect.com/science/article/pii/S1352231014002787
Corneal ulceration and episcleritis associated with WiskottâAldrich syndrome
AbstractPurposeTo present anterior segment ophthalmic manifestations of WiskottâAldrich syndrome (WAS), a rare X-linked primary immune-deficiency.ObservationsA 15-year old male with WAS presented with multiple corneal ulcers of the left eye. Once resolved, this was followed by separate episodes of episcleritis in the left eye and corneal infiltrates of the right eye. Successful treatment included topical antibiotics and anti-inflammatories.ConclusionsOcular manifestations of WAS, due to secondary infection and inflammation, may be severe. This case report emphasizes the importance of prompt ophthalmic evaluation and treatment of these patients
Recommended from our members
Extending the lifetime of resonant atmospheric particulate mass sensors with solvent rinses
The cleaning of a collection-based sensor extends its lifetime and reduces its effective cost. Existing cleaning regimes for silicon-based devices typically require access to large laboratory equipment. A simple cleaning method based on solvent rinses is presented here for the application of microresonator atmospheric particulate mass sensors. The suggested approach is intended for scenarios with limited access to laboratory equipment. Two piezoelectric resonator topologies (in-plane bulk mode and out-of-plane flexural) collected particles via impaction for an hour before rinsing. The solvent rinses reset the resonant frequency and quality factor of each resonator to within 0.4% and 10% of their original values, respectively. Subsequent mass collections were largely repeatable despite fluctuations in particle concentration and deposition location. The presented method provides a straightforward but effective cleaning method for soluble particulate removal. A physical cleaning method is required after substantial insoluble particle adsorption
Root-soil rotation stiffness of Norway spruce ( Picea abies (L.) Karst) growing on subalpine forested slopes
Trees bend and break when exposed to external forces such as wind, rockfall, and avalanches. A common simplification when modelling the tree response to these forces is to simplify the system as a clamped beam which means that the stem deflection is related to the stem flexibility only. However, a certain part of the stem deflection originates from rotation of the root-soil plate. In this paper, we investigate this contribution to the overall stem deflection. Norway spruce (Picea abies (L.) Karst) trees were subjected to winching tests to analyse the anchorage mechanics of the tree. The tests were performed at two experimental sites with an average slope of 32 and 34° and one site with a nearly flat ground in subalpine forests near Davos, Switzerland, during the vegetation periods of 2003 and 2004. The trees were pulled downslope with a winch and the applied force, stem base rotation, and the angle of the applied force relative to the stem were recorded. After the tree had fallen over, stem diameter and branch mass were measured for every meter segment. These data were used to model the tree in the finite element software ANSYSÂź, which was used for calculating the rotational stem base moment as aâŁfunction of stem base rotation. The root-soil rotation stiffness k root was defined as the secant stiffness calculated at 0.5° root-soil plate rotation. Young's modulus of elasticity E of the stem was iteratively changed until the correct stem rotation was obtained. The best correlation between k root and different tree characteristics was the squared diameter at breast height, DBH2. Not incorporating the normal forces due to weight of the overhanging masses from crown and stem resulted in a maximum underestimation for k root of approximately 14%. Thus, also the acting moment on the stem base will be underestimated causing the safety factor against uprooting to be overestimate
Online molecular characterisation of organic aerosols in an atmospheric chamber using extractive electrospray ionisation mass spectrometry
Abstract. The oxidation of biogenic volatile organic compounds (VOCs) represents a substantial source of secondary organic aerosol (SOA) in the atmosphere. In this study, we present online measurements of the molecular constituents formed in the gas and aerosol phases during α-pinene oxidation in the Cambridge Atmospheric Simulation Chamber (CASC). We focus on characterising the performance of extractive electrospray ionisation (EESI) mass spectrometry (MS) for particle analysis. A number of new aspects of EESI-MS performance are considered here. We show that relative quantification of organic analytes can be achieved in mixed organicâinorganic particles. A comprehensive assignment of mass spectra for α-pinene derived SOA in both positive and negative ion modes is obtained using an ultra-high-resolution mass spectrometer. We compare these online spectra to conventional offline ESI-MS spectra and find good agreement in terms of the compounds identified, without the need for complex sample work-up procedures. Under our experimental conditions, EESI-MS signals arise only from particle-phase analytes. High-time-resolution (7âŻmin) EESI-MS spectra are compared with simulations from the near-explicit Master Chemical Mechanism (MCM) for a range of reaction conditions. We show that MS peak abundances scale with modelled concentrations for condensable products (pinonic acid, pinic acid, OH-pinonic acid). Relative quantification is achieved throughout SOA formation as the composition, size and mass (5â2400âŻÂ”gâŻmâ3) of particles is evolving. This work provides a robust demonstration of the advantages of EESI-MS for chamber studies over offline ESI-MS (time resolution, relative quantification) and over hard online techniques (molecular information).
</jats:p
Effects of spatial sensitivity on mass sensing with bulk acoustic mode resonators
The spatial sensitivity of bulk acoustic mode resonators can influence calibrations when they are implemented as accurate mass sensors of surface-bound particles. A new spatial sensitivity model based on images of the resonator surface is introduced from early principles. The adsorption of particles was studied empirically by repeatedly drying particle laden droplets on the surface of two 3.14 MHz bulk acoustic mode resonators. Theoretical and experimental results were compared to identify three scenarios over the course of consecutive droplet evaporation with varying spatial sensitivity influences. Examining different surface treatments for the resonators revealed the hydrophilic surface to have a higher rate of particle stacking and conglomeration.ATZ thanks the Natural Sciences and Engineering Research Council of Canada, the Sir Winston Churchill Society of Edmonton, and the Cambridge Trust for funding of the PhD degree.This is the author accepted manuscript. The final version is available from Elsevier via http://dx.doi.org/10.1016/j.sna.2015.11.00
- âŠ