1,480 research outputs found
A design of jet mixed tank
Jet mixing has become alternative to conventional impeller mixing for various applications in process industries. Mixing time is an important design parameter in jet mixing. Many authors have used different parameters like jet velocity, jet diameter, tank height etc to find out the correlation for mixing time. There is no comprehensive review, which tells exclusively about these parameters used for jet mixing. Recently many authors have used CFD in order to overcome experimental limitations for design of jet mixed tanks. A critical analysis of the available literature data has been made and some general conclusions have been drawn concerning the various parameters. This review focuses on the study of various parameters used in experimental and CFD work on jet mixed tanks to get the optimum design procedure
Modeling the adsorption of benzeneacetic acid on CaO2 nanoparticles using artificial neural network
The present work reported a method for removal of benzeneacetic acid from water solution using CaO2 nanoparticle as adsorbent and modeling the adsorption process using artificial neural network (ANN). CaO2 nanoparticles were synthesized by a chemical precipitation technique. The characterization and confirmation of nanoparticles have been done by using different techniques such as X-ray powder diffraction (XRD), high resolution field emission scanning electron microscope (HR-FESEM),transmittance electron microscopy (TEM) and high-resolution TEM (HRTEM) analysis. ANN model was developed by using elite-ANN software. The network was trained using experimental data at optimum temperature and time with different CaO2 nanoparticle dosage (0.002-0.05 g) and initial benzeneacetic acid concentration (0.03-0.099 mol/L). Root mean square error (RMS) of 3.432, average percentage error (APE) of 5.813 and coefficient of determination (R2 ) of 0.989 were found for prediction and modeling of benzeneacetic acid removal. The trained artificial neural network is employed to predict the output of the given set of input parameters. The single-stage batch adsorber design of the adsorption of benzeneacetic acid onto CaO2 nanoparticles has been studied with well fitted Langmuir isotherm equation which is homogeneous and has monolayer sorption capacity
Unravelling the fluorescence kinetics of light-harvesting proteins with simulated measurements
The plant light-harvesting pigment-protein complex LHCII is the major antenna sub-unit of PSII and is generally (though not universally) accepted to play a role in photoprotective energy dissipation under high light conditions, a process known Non-Photochemical Quenching (NPQ). The underlying mechanisms of energy trapping and dissipation within LHCII are still debated. Various proposed models differ considerably in their molecular and kinetic detail, but are often based on different interpretations of very similar transient absorption measurements of isolated complexes. Here we present a simulated measurement of the fluorescence decay kinetics of quenched LHCII aggregates to determine whether this relatively simple measurement can discriminate between different potential NPQ mechanisms. We simulate not just the underlying physics (excitation, energy migration, quenching and singlet-singlet annihilation) but also the signal detection and typical experimental data analysis. Comparing this to a selection of published fluorescence decay kinetics we find that: (1) Different proposed quenching mechanisms produce noticeably different fluorescence kinetics even at low (annihilation free) excitation density, though the degree of difference is dependent on pulse width. (2) Measured decay kinetics are consistent with most LHCII trimers becoming relatively slow excitation quenchers. A small sub-population of very fast quenchers produces kinetics which do not resemble any observed measurement. (3) It is necessary to consider at least two distinct quenching mechanisms in order to accurately reproduce experimental kinetics, supporting the idea that NPQ is not a simple binary switch switch
Clinical profile and outcome of children admitted with dengue fever in a tertiary care hospital in South India
Objective: The objective is to study the clinical profile and outcome of patients admitted with dengue fever and to identify the risk factors for severe dengue (SD). Materials and Methods: This is a descriptive study of children admitted with a diagnosis of dengue fever from January 2013 to June 2014 in a tertiary care Medical College Hospital in South India. Results: A total of 306 children were admitted with dengue fever during the study period with a mean age of 7.8±3.2 years and male:female ratio of 1.06:1. The most common symptoms apart from fever were vomiting (54.9%) and abdominal pain (36.3%). Tender hepatomegaly and narrow pulse pressure were the most common signs. 131 (42.8%) were classified as dengue fever without warning signs, 119 (38.8%) as dengue fever with warning signs (DWS), and 56 (18.4%) as severe dengue (SD) according to the WHO guidelines 2012. A significant difference in aspartate aminotransferase’ and alanine aminotransferase elevation was noted among dengue fever without warning signs, DWS, and SD. Hemoconcentration, thrombocytopenia, hypoproteinemia, hypoalbuminemia, hypocalcemia, hypoglycemia, hypokalemia, hepatic derangement, elevated urea, and creatinine were significantly associated with SD. The mean values of prothrombin time, international normalized ratio, and activated partial thromboplastin time in SD were 19±3.7 s, 1.5±0.3 s, and 46±7 s, respectively. The finding of thalamic hypodensity in one patient with dengue encephalopathy was only rarely described in literature. Conclusion: Bleeding manifestations altered coagulation profile as well as deranged liver functions can be used as predictors of severe dengue fever
Unravelling the fluorescence kinetics of light-harvesting proteins with simulated measurements
The plant light-harvesting pigment-protein complex LHCII is the major antenna sub-unit of PSII and is generally (though not universally) accepted to play a role in photoprotective energy dissipation under high light conditions, a process known Non-Photochemical Quenching (NPQ). The underlying mechanisms of energy trapping and dissipation within LHCII are still debated. Various models have been proposed for the underlying molecular detail of NPQ, but they are often based on different interpretations of very similar transient absorption measurements of isolated complexes. Here we present a simulated measurement of the fluorescence decay kinetics of quenched LHCII aggregates to determine whether this relatively simple measurement can discriminate between different potential NPQ mechanisms. We simulate not just the underlying physics (excitation, energy migration, quenching and singlet-singlet annihilation) but also the signal detection and typical experimental data analysis. Comparing this to a selection of published fluorescence decay kinetics we find that: (1) Different proposed quenching mechanisms produce noticeably different fluorescence kinetics even at low (annihilation free) excitation density, though the degree of difference is dependent on pulse width. (2) Measured decay kinetics are consistent with most LHCII trimers becoming relatively slow excitation quenchers. A small sub-population of very fast quenchers produces kinetics which do not resemble any observed measurement. (3) It is necessary to consider at least two distinct quenching mechanisms in order to accurately reproduce experimental kinetics, supporting the idea that NPQ is not a simple binary switch
Efficient cenosphere supported catalyst for the esterification of <i>n</i>-octanol with acetic acid
Accelerator development in India for ADS programme
At BARC, development of a Low Energy High Intensity Proton Accelerator (LEHIPA), as front-end injector of the 1 GeV accelerator for the ADS programme, has been initiated. The major components of LEHIPA (20 MeV, 30 mA) are a 50 keV ECR ion source, a 3 MeV Radio Frequency Quadrupole (RFQ) and a 20 meV drift tube linac (DTL). The Low Energy Beam Transport (LEBT) and Medium Energy Beam Transport (MEBT) lines match the beam from the ion source to RFQ and from RFQ to DTL respectively. Design of these systems has been completed and fabrication of their prototypes has started. Physics studies of the 20-1000 MeV part of the Linac are also in progress. In this paper, the present status of this project is presented
Synthesis, Characterization and Application of 1-Butyl-3 Methylimidazolium Chloride as Green Material for Extractive Desulfurization of Liquid Fuel
The possible application of imidazolium ionic liquids as energy-efficient green material for extractive deep desulfurization of liquid fuel has been investigated. 1-Butyl-3-methylimidazolium chloride [BMIM]Cl was synthesized by nucleophilic substitution reaction of n-methylimidazolium and 1-chlorobutane. Molecular structures of the ILs were confirmed by FTIR, 1H-NMR, and 13C-NMR. The thermal properties, conductivity, solubility, water content and viscosity analysis of [BMIM]Cl were carried out. The effects of reaction time, reaction temperature, sulfur compounds, and recycling of IL without regeneration on dibenzothiophene removal of liquid fuel were presented. In the extractive desulfurization process, the removal of dibenzothiophene in n-dodecane using [BMIM]Cl was 81% with mass ratio of 1 : 1, in 30 min at 30°C under the mild reaction conditions. Also, desulfurization of real fuels with IL and multistage extraction were studied. The results of this work might offer significant insights in the perceptive use of imidazoled ILs as energy-efficient green material for extractive deep desulfurization of liquid fuels as it can be reused without regeneration with considerable extraction efficiency
- …