3,902 research outputs found
Importance of DTM accuracy, precision and acquisition technique for estimating contributing areas of post-fire erosion at the slope and catchment scale
Wildfires are a frequent phenomenon in Portugal, affecting over 300.000 ha in dry years like 2003 and 2005. Directly and/or indirectly, wildfires can strongly enhance the hydrological response and associated sediment losses and, thereby, negatively affect land-use sustainability as well as ecosystem functioning of downstream aquatic habitats. Therefore, the EROSFIRE projects aim at developing a GIS-tool for predicting soil erosion hazard following wildfire and post-fire land management practices. Assessment and modeling of runoff and soil erosion rates critically depends on accurate estimates of the contributing areas. In the case of catchments as well as unbounded erosion plots (arguably, the only practical solution for slope-scale measurements), delineation of contributing area requires a Digital Terrain Model (DTM) with an adequate resolution and accuracy. The DTM that was available for the Colmeal study area (GoÃs municipality, central Portugal) was that of the 1:25.000 topographic map produced by the Military Geographic Institute. Since this study area involves a rather small experimental catchment of roughly 10 ha and relatively short study slopes of less than 100 m long, two different data acquisition techniques were used to produce high-resolution and high-accuracy DTM. One is aerial photogrammetry, whilst the other is terrestrial laser scanning. To produce a DTM by photogrammetric means, a dedicated digital aerial photography mission was carried out. The images had a pixel size of 10 cm. Manual measurements permitted to measure breaklines and were complemented by automatic measurements. In this way, a DTM in a TIN format was produced. This was further converted to grid format using the ArcGIS software system. Signalized control points allowed obtaining the DTM in the same global reference system as that employed for terrestrial laser scanning. The terrestrial laser scanning was done using a Riegl LMS Z360I, stationed in 8 points within the area to provide a complete coverage. The resulting dense cloud of points was filtered – by the company carrying out the scanning mission - to remove the non-terrain points (in particular vegetation). Several grids of different sizes were produced (0.10 x 0.10, 0.20 x 0.20, 0.50 x 0.50, 1 x 1 and 2 x 2 m2). The proposed work will compare and analyze estimates of contribution areas that were obtained with the two above-mentioned data acquisition techniques and for different spatial resolutions. This will be done for selected slope-scale sediment fences as well as for the outlet of the experimental catchment. In addition, different algorithms available in ArcGIS for TIN-to-grid conversion will be compared, since preliminary results have suggested that these procedures produce markedly different results
Effect of the Resolution and Accuracy of DTM produced with Aerial Photogrammetry and Terrestrial Laser Scanning on Slope- and Catchment-scale Erosion Assessment in a Recently Burnt Forest Area: a Case Study
Wildfires are a common phenomenon in Portugal, affecting on average 100.000 ha of rural areas per year and up to 400.000 ha in dramatic years like 2003 and 2005. Wildfires can strongly enhance the hydrological response and associated sediment losses in recently burnt forest catchments and, thereby, negatively affect land-use sustain- ability of the affected terrains as well as ecosystem functioning of downstream aquatic habitats. Therefore, the EROSFIRE-I and –II projects aim at developing a GIS-tool for predicting soil erosion hazard following wildfire and, ultimately, for assessing the implications of alternative post-fire land management practices.
Assessment of runoff and soil erosion rates critically depends on accurate estimates of the corresponding runoff areas. In the case of catchments as well as unbounded erosion plots (arguably, the only practical solution for slope-scale measurements), delineation of runoff area requires a Digital Terrain Model (DTM) with an adequate resolution and accuracy. The DTM that was available for the Colmeal study area, localized in the mountain range of Lousã, in the central part of Portugal, of EROSFIRE-II project is that of the 1:25.000 topographic map produced by the Military Geographic Institute. Since the Colmeal area involves a rather small experimental catchment of roughly 10 ha and relatively short study slopes of less than 100 m long, two different data acquisition techniques were used to produce high-resolution and high-accuracy DTM. One of the data acquisition techniques is aerial photogrammetry whilst the other is terrestrial laser scanning. In order to produce a DTM by photogrammetric means, a dedicated digital aerial photography mission was carried out. The images have a pixel size of 10 cm. Manual measurements permitted to measure breaklines and were complemented by automatic measurements. In this way, a DTM in a TIN format was produced. This was further converted to grid format using the ArcGIS software system. Signalized control points allowed obtaining the DTM in the same global reference system as that employed for terrestrial laser scanning. The terrestrial laser scanning was done using a Riegl LMS Z360I, stationed in 8 points within the area to provide a complete coverage. The resulting dense cloud of points was filtered – by the company carrying out the scanning mission - to remove the non-terrain points (in particular vegetation). Several grids of different sizes were produced (0.10 x 0.10, 0.20 x 0.20, 0.50 x 0.50, 1 x 1 and 2 x 2 m2).
This work will study the effect on runoff and erosion rates at the slope- and catchment-scale of DTM with differ- ent resolution, but produced with data collected with the same acquisition technique, and of DTM with the same resolution, but produced with data collected with the two different acquisition techniques. The study is being carried out in ArcGIS using DTM in a grid format. Preliminary results suggest that the conver- sion of TIN-to-grid in ArcGIS produces results that depend on the procedure being applied. Therefore, the different algorithms available at ArcGIS for TIN-to-grid conversion are currently being tested, using an artificially produced DTM. This testing includes various interpolation techniques for grid generation, and will be extended to different algorithms for computation of drainage flow direction
Textural evolution and phase transformation in titania membranes: Part 1. -unsupported membranes
Textural evolution in sol–gel derived nanostructured unsupported titania membranes has been studied using differential scanning calorimetry (DSC), differential thermal analysis (DTA), thermal gravimetry (TG), X-ray diffraction (XRD) and N2 adsorption. The anatase-to-rutile phase transformation kinetics were studied using the Avrami model. The precursor gel had a surface area of ca. 165 m2 g–1, which after heat treatment at 600 °C for 8 h reduced to zero. Undoped titania-gel layers transformed to more than 95% rutile after calcination at 600 °C for 8 h. The causes of surface-area reduction and pore growth were anatase crystallite growth and the enhanced sintering of rutile during transformation. Lanthanum oxide was identified as a suitable dopant for shifting the transformation temperature to ca. 850 °C. Lanthanum oxide doped titania showed an improved stability of porous texture compared to that of the undoped titania membranes
Highly Non-linear Excitonic Zeeman Spin-Splitting in Composition-Engineered Artificial Atoms
Non-linear Zeeman splitting of neutral excitons is observed in composition
engineered In(x)Ga(1-x)As self-assembled quantum dots and its microscopic
origin is explained. Eight-band k.p simulations, performed using realistic dot
parameters extracted from cross-sectional scanning tunneling microscopy, reveal
that a quadratic contribution to the Zeeman energy originates from a spin
dependent mixing of heavy and light hole orbital states in the dot. The dilute
In-composition (x<0.35) and large lateral size (40-50 nm) of the quantum dots
investigated is shown to strongly enhance the non-linear excitonic Zeeman gap,
providing a blueprint to enhance such magnetic non-linearities via growth
engineering
Decoherence induced by squeezing control errors in optical and ion trap holonomic quantum computations
We study decoherence induced by stochastic squeezing control errors
considering the particular implementation of Hadamard gate on optical and ion
trap holonomic quantum computers. We find the fidelity for Hadamard gate and
compute the purity of the final state when the control noise is modeled by
Ornstein-Uhlenbeck stochastic process. We demonstrate that in contradiction to
the case of the systematic control errors the stochastic ones lead to
decoherence of the final state. In the small errors limit we derive a simple
formulae connecting the gate fidelity and the purity of the final state.Comment: RevTex, 5 pages, few typos correcte
Anomalous reaction-transport processes: the dynamics beyond the Mass Action Law
In this paper we reconsider the Mass Action Law (MAL) for the anomalous
reversible reaction with diffusion. We provide a
mesoscopic description of this reaction when the transitions between two states
and are governed by anomalous (heavy-tailed) waiting-time
distributions. We derive the set of mesoscopic integro-differential equations
for the mean densities of reacting and diffusing particles in both states. We
show that the effective reaction rate memory kernels in these equations and the
uniform asymptotic states depend on transport characteristics such as jumping
rates. This is in contradiction with the classical picture of MAL. We find that
transport can even induce an extinction of the particles such that the density
of particles or tends asymptotically to zero. We verify analytical
results by Monte Carlo simulations and show that the mesoscopic densities
exhibit a transient growth before decay.Comment: 4 pages, 3 figure
Synthesis and textural properties of unsupported and supported rutile (TiO2) membranes
Two approaches were postulated for improving the stability of porous texture of titania membranes: (1) retarding the phase transformation and grain growth; (2) avoiding the phase transformation. Based on the second approach, rutile membranes were made directly from a rutile sol, prepared by the precipitation of titania on SnO2 nuclei. The rutile membranes were stable up to 800 °C, with a porosity of ca. 40%, whereas normal titania membranes (starting with anatase) show very little porosity above 600 °C. Alumina substitution retards grain growth and pore growth at 850 °C for unsupported as well as supported membranes. \u
High-temperature catalyst supports and ceramic membranes: Metastability and particle packing
Parameters and/or processes responsible for the stability of catalyst supports and ceramic membranes are discussed. Two major parameters/processes were identified which are responsible for the stability of sol-gel derived nanostructured oxides at elevated temperatures. They are metastable-to-stable phase transformation and structure and packing of primary particles within the aggregate. Based on these observations, strategies to develop thermostable nanostructured oxides for high-temperature membrane and catalyst applications are discussed by taking titania and titania-alumina nanocomposites as examples
Textural evolution and phase transformation in titania membranes: Part 2. - Supported membranes
Nanostructural evolution and phase transformation in supported and unsupported titania membranes have been studied using Raman spectroscopy, X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM). Densification of unsupported membranes started at ca. 450 °C and reached more than 97% density at 600 °C, whereas the supported membranes had a density of only ca. 70–75% even at 700 °C when calcined for 8 h. At 700 °C the average crystallite size of supported and unsupported membranes was ca. 20 and 70 nm, respectively. This behaviour is primarily attributed to the decrease in the driving force for sintering due to the stress developed during the constrained sintering of a film attached to a rigid support and to the inhibition of the reorganization process within the film, resulting in lower coordination numbers in supported membranes. Supported membranes showed a higher transformation temperature (slower rate of transformation) than did the unsupported. Supported and unsupported membranes, calcined for 8 h, transformed to ca. 90% rutile (calculated from Raman spectrum) after calcination at 850 and 650 °C, respectively. This difference in phase transformation behaviour is attributed primarily to the large stress which is developed in a constrained environment owing to the negative volume change during the anatase–rutile transformation
Runoff at the micro-plot and slope scale following wildfire, central Portugal
Through their effects on soil properties and vegetation/litter cover, wildfires can strongly enhance overland flow generation and accelerate soil erosion [1] and, thereby, negatively affect land-use sustainability as well as downstream aquatic and flood zones. Wildfires are a common phenomenon in present-day Portugal, devastating in an average year some 100.000 ha of forest and woodlands and in an exceptional year like 2003 over 400.000 ha. There therefore exists a clear need in Portugal for a tool that can provide guidance to post-fire land management by predicting soil erosion risk, on the one hand, and, on the other, the mitigation effectiveness of soil conservation measures. Such a tool has recently been developed for the Western U.S.A. [3: ERMiT] but its suitability for Portuguese forests will need to be corroborated by field observations.
Testing the suitability of existing erosion models in recently burned forest areas in Portugal is, in a nutshell, the aim of the EROSFIRE projects. In the first EROSFIRE project the emphasis was on the prediction of erosion at the scale of individual hill slopes. In the ongoing EROSFIRE-II project the spatial scope is extended to include the catchment scale, so that also the connectivity between hill slopes as well as channel and road processes are being addressed. Besides ERMiT, the principal models under evaluation for slope-scale erosion prediction are: (i) the variant of USLE [4] applied by the Portuguese Water Institute after the wildfires of 2003; (ii) the Morgan–Morgan–Finney model (MMF) [5]; (iii) MEFIDIS [6]. From these models, MEFIDIS and perhaps MMF will, after successful calibration at the slope scale, also be applied for predicting catchment-scale sediment yields of extreme events
- …