Avalanche noise characteristics of thin GaAs structures with distributed carrier generation

It is known that both pure electron and pure hole injection into thin GaAs multiplication regions gives rise to avalanche multiplication with noise lower than predicted by the local noise model. In this paper, it is shown that the noise from multiplication initiated by carriers generated throughout a 0.1 μm avalanche region is also lower than predicted by the local model but higher than that obtained with pure injection of either carrier type. This behavior is due to the effects of nonlocal ionization brought about by the dead space; the minimum distance a carrier has to travel in the electric field to initiate an ionization even

Recovery of metals from waste lithium ion battery leachates using biogenic hydrogen sulfide

Lithium ion battery (LIB) waste is increasing globally and contains an abundance of valuable metals that can be recovered for re-use. This study aimed to evaluate the recovery of metals from LIB waste leachate using hydrogen sulfide generated by a consortium of sulfate-reducing bacteria (SRB) in a lactate-fed fluidised bed reactor (FBR). The microbial community analysis showed Desulfovibrio as the most abundant genus in a dynamic and diverse bioreactor consortium. During periods of biogenic hydrogen sulfide production, the average dissolved sulfide concentration was 507 mg L−1 and the average volumetric sulfate reduction rate was 278 mg L−1 d−1. Over 99% precipitation efficiency was achieved for Al, Ni, Co, and Cu using biogenic sulfide and NaOH, accounting for 96% of the metal value contained in the LIB waste leachate. The purity indices of the precipitates were highest for Co, being above 0.7 for the precipitate at pH 10. However, the process was not selective for individual metals due to simultaneous precipitation and the complexity of the metal content of the LIB waste. Overall, the process facilitated the production of high value mixed metal precipitates, which could be purified further or used as feedstock for other processes, such as the production of steel

Berry Curvature in Graphene: A New Approach

In the present paper we have directly computed the Berry curvature terms relevant for Graphene in the presence of an \textit{inhomogeneous} lattice distortion. We have employed the generalized Foldy Wouthuysen framework, developed by some of us \cite{ber0,ber1,ber2}. We show that a non-constant lattice distortion leads to a valley-orbit coupling which is responsible to a valley-Hall effect. This is similar to the valley-Hall effect induced by an electric field proposed in \cite{niu2} and is the analogue of the spin-Hall effect in semiconductors \cite{MURAKAMI, SINOVA}. Our general expressions for Berry curvature, for the special case of homogeneous distortion, reduce to the previously obtained results \cite{niu2}. We also discuss the Berry phase in the quantization of cyclotron motion.Comment: Slightly modified version, to appear in EPJ

Adiponectin Prevents Diabetic Premature Senescence of Endothelial Progenitor Cells and Promotes Endothelial Repair by Suppressing the p38 MAP Kinase/p16INK4A Signaling Pathway

OBJECTIVE - A reduced number of circulating endothelial progenitor cells (EPCs) are casually associated with the cardiovascular complication of diabetes. Adiponectin exerts multiple protective effects against cardiovascular disease, independent of its insulin-sensitizing activity. The objective of this study was to investigate whether adiponectin plays a role in modulating the bioavailability of circulating EPCs and endothelial repair. RESEARCH DESIGN AND METHODS - Adiponectin knockout mice were crossed with db+/- mice to produce db/db diabetic mice without adiponectin. Circulating number of EPCs were analyzed by flow cytometry. Reendothelialization was evaluated by staining with Evans blue after wire-induced carotid injury. RESULTS - In adiponectin knockout mice, the number of circulating EPCs decreased in an age-dependent manner compared with the wild-type controls, and this difference was reversed by the chronic infusion of recombinant adiponectin. In db/db diabetic mice, the lack of adiponectin aggravated the hyperglycemia-induced decrease in circulating EPCs and also diminished the stimulatory effects of the PPARγ agonist rosiglitazone on EPC production and reendothelialization. In EPCs isolated from both human peripheral blood and mouse bone marrow, treatment with adiponectin prevented high glucose-induced premature senescence. At the molecular level, adiponectin decreased high glucose-induced accumulation of intracellular reactive oxygen species and consequently suppressed activation of p38 MAP kinase (MAPK) and expression of the senescence marker p16INK4A. CONCLUSIONS - Adiponectin prevents EPC senescence by inhibiting the ROS/p38 MAPK/p16 INK4A signaling cascade. The protective effects of adiponectin against diabetes vascular complications are attributed in part to its ability to counteract hyperglycemia-mediated decrease in the number of circulating EPCs. © 2010 by the American Diabetes Association.published_or_final_versio

J/ψ+c+cˉJ/\psi + c + \bar{c} Photoproduction in e+e−e^+ e^- Scattering

We investigate the $J/\psi$ + c + $\bar{c}$ photoproduction in $e^+ e^-$ collision at the LEP II energy. The physical motivations for this study are: 1) such next-to-leading order(NLO) process was not considered in previous investigations of $J/\psi$ photoproduction in $e^+ e^-$ interaction, and it is worthwhile to do so in order to make sound predictions for experimental comparison; 2) from recent Belle experiment results, the process with same final states at the $B$ factory has a theoretically yet unexplainable large fraction; hence it is interesting to see what may happen at other colliders; 3) the existing LEP data are marginal in observing such process, and at the planed Linear Colliders(LCs) this process can be measured with high accuracy; 4) it is necessary to take this process into consideration in the aim of elucidating the quarkonium production mechanism, especially in testing the universality of NRQCD nonperturbative matrix elements via $J/\psi$ photoproduction in electron-position collisions.Comment: 15 pages, 3 figure

Patients with refractory cytomegalovirus (CMV) infection following allogeneic haematopoietic stem cell transplantation are at high risk for CMV disease and non-relapse mortality

AbstractPre-emptive therapy is an effective approach for cytomegalovirus (CMV) control; however, refractory CMV still occurs in a considerable group of recipients after allogeneic haematopoietic stem cell transplantation (allo-HSCT). Until now, hardly any data have been available about the clinical characteristics and risk factors of refractory CMV, or its potential harmful impact on the clinical outcome following allo-HSCT. We studied transplant factors affecting refractory CMV in the 100 days after allo-HSCT, and the impact of refractory CMV on the risk of CMV disease and non-relapse mortality (NRM). We retrospectively studied 488 consecutive patients with CMV infection after allo-HSCT. Patients with refractory CMV in the 100 days after allo-HSCT had a higher incidence of CMV disease and NRM than those without refractory CMV (11.9% vs. 0.8% and 17.1% vs. 8.3%, respectively). Multivariate analysis showed that refractory CMV infection in the 100 days after allo-HSCT was an independent risk factor for CMV disease (hazard ratio (HR) 10.539, 95% CI 2.467–45.015, p 0.001), and that refractory CMV infection within 60–100 days after allo-HSCT was an independent risk factor for NRM (HR 8.435, 95% CI 1.511–47.099, p 0.015). Clinical factors impacting on the risk of refractory CMV infection included receiving transplants from human leukocyte antigen-mismatched family donors (HR 2.012, 95% CI 1.603–2.546, p <0.001) and acute graft-versus-host disease (HR 1.905, 95% CI 1.352–2.686, p <0.001). We conclude that patients with refractory CMV infection during the early stage after allo-HSCT are at high risk for both CMV disease and NRM

Modeling manufacturing processes using a genetic programming-based fuzzy regression with detection of outliers

Fuzzy regression (FR) been demonstrated as a promising technique for modeling manufacturing processes where availability of data is limited. FR can only yield linear type FR models which have a higher degree of fuzziness, but FR ignores higher order or interaction terms and the influence of outliers, all of which usually exist in the manufacturing process data. Genetic programming (GP), on the other hand, can be used to generate models with higher order and interaction terms but it cannot address the fuzziness of the manufacturing process data. In this paper, genetic programming-based fuzzy regression (GP-FR), which combines the advantages of the two approaches to overcome the deficiencies of the commonly used existing modeling methods, is proposed in order to model manufacturing processes. GP-FR uses GP to generate model structures based on tree representation which can represent interaction and higher order terms of models, and it uses an FR generator based on fuzzy regression to determine outliers in experimental data sets. It determines the contribution and fuzziness of each term in the model by using experimental data excluding the outliers. To evaluate the effectiveness of GP-FR in modeling manufacturing processes, it was used to model a non-linear system and an epoxy dispensing process. The results were compared with those based on two commonly used FR methods, Tanka's FR and Peters' FR. The prediction accuracy of the models developed based on GP-FR was shown to be better than that of models based on the other two FR methods

Direct Signals for Large Extra Dimensions in the Production of Fermion Pairs at Linear Colliders

We analyze the potentiality of the new generation of $e^+e^-$ linear colliders to search for large extra dimensions via the production of fermion pairs in association with Kaluza-Klein gravitons (G), i.e. $e^+e^- \leftarrow f\bar{f}G$. This process leads to a final state exhibiting a significant amount of missing energy in addition to acoplanar lepton or jet pairs. We study in detail this reaction using full tree level contibutions due to the graviton emission and the standard model backgrounds. After choosing the cuts to enhance the signal, we show that a linear collider with a center-of-mass energy of 500 GeV will be able to probe quantum gravity scales from 0.96(0.86) up to 4.1(3.3) TeV at 2(5)$\sigma$ level, depending on the number of extra dimensions.Comment: 19 pages, 5 figures. Using RevTex, axodraw.sty. Discussion was extended. No changes in the results. Accepted for publication by Phys. Rev.

t→bWt \to b W in NonCommutative Standard Model

We study the top quark decay to b quark and W boson in the NonCommutative Standard Model (NCSM). The lowest contribution to the decay comes from the terms quadratic in the matrix describing the noncommutative (NC) effects while the linear term is seen to identically vanish because of symmetry. The NC effects are found to be significant only for low values of the NC characteristic scale.Comment: 11 page Latex file containing 2 eps figures (redrawn). More discussion included. To appear in PR

Statefinder diagnostic and stability of modified gravity consistent with holographic and new agegraphic dark energy

Recently one of us derived the action of modified gravity consistent with the holographic and new-agegraphic dark energy. In this paper, we investigate the stability of the Lagrangians of the modified gravity as discussed in [M. R. Setare, Int. J. Mod. Phys. D 17 (2008) 2219; M. R. Setare, Astrophys. Space Sci. 326 (2010) 27]. We also calculate the statefinder parameters which classify our dark energy model.Comment: 12 pages, 2 figures, accepted by Gen. Relativ. Gravi