Spectral Analysis of Block Structured Nonlinear Systems

A unified identification theory for nonlinear systems which can be represented by cascade, multiplicative and feedback connections of linear dynamic and static nonlinear subsystems is presented

Two-Dimensional Pattern Analysis and Classification Using a Complex Orthogonal Estimation Algorithm

An orthogonal estimation algorithm is derived for the estimation of parameters associated with the complex autoregressive boundary model of two-dimensional shapes. It is shown that the coefficients of the orthogonal model and the original system parameters are invariant to rotation around the origin, to the choice of starting point in tracing the boundary and to scale and translation. The error reduction ratios derived from the estimation algorithm can be used to detect which terms should be included in the system model, and classification, based on the orthogonal parameters is shown to be less susceptible to incorrect model order specification. Classification based on orthogonal data sets is also derived and it is demonstrated that this approach can avoid some problems associated with classification based on the model parameters alone

On-Line Structure Detection and Parameter Estimation with Exponential Windowing for Nonlinear Systems

A new recursive orthogonal estimation algorithm is derived which updates both the model structure and the parameters of nonlinear models on-line. Techniques developed for linear systems are not generally suitable when nonlinear models are considered because the complexity of nonlinear systems and the demands of recursive processing make on-line structure detection much more difficult..........

Analysis and Recognition of Three Dimensional Closed Boundaries.

An autoregressive model is introduced for modelling, invariant feature extraction and recognition of arbitrary three dimensional(3D)closed boundary curves. An orthogonal estimation algorithm is derived for the estimation of the coefficient matrix associated with the model and an error reduction ratio is used to detect the order of the model. It is shown that the eigenvalues and the determinant of the coefficient matrix are invariant to rotation around the origin, to the choice of starting point in tracing the boundary and to scale and translation which can therefore be extracted for the recognition of the 3D closed boundary curves

Green synthesis of gamma-valerolactone (GVL) through hydrogenation of biomass-derived levulinic acid using non-noble metal catalysts : A critical review

The distinct physicochemical properties and renewable origin of gamma-valerolactone (GVL) have provided opportunities for diversifying its applications, particularly as a green solvent, excellent fuel additive, and precursor to valuable chemicals. Among the related publications found in the SCOPUS database (≈172 in the last 10 years), we focused our effort to review the conversion of levulinic acid (LA) to GVL over non-noble metal catalysts and the corresponding mechanisms (≈30 publications) as well as the applications of GVL as a solvent, fuel additive, and platform chemical (≈30 publications) mostly in the last five years (some preceding publications have also been included due to their relevance and importance in the field). The use of non-noble metals (e.g., Cu and Zr) presents a greener route of GVL synthesis than the conventional practice employing noble metals (e.g., Pd and Ru), in view of their higher abundance and milder reaction conditions needed (e.g., low pressure and temperature without H 2 involved). The significance of the catalyst characteristics in promoting catalytic transfer hydrogenation of LA to GVL is critically discussed. Structural features and acid-base properties are found to influence the activity and selectivity of catalysts. Furthermore, metal leaching in the presence of water in catalytic systems is an important issue, resulting in catalyst deactivation. Various endeavors for developing catalysts using well-dispersed metal particles along with a combination of Lewis acid and base sites are suggested for efficiently synthesizing GVL from LA

Ionizing radiation absorption of vascular surgeons during endovascular procedures

ObjectiveEndovascular procedures have become an integral part of a vascular surgeon’s practice. The exposure of surgeons to ionizing radiation and other safety issues have not been well studied. We investigated the radiation exposure of a team of vascular surgeons in an active endovascular unit and compared yearly dosages absorbed by various body parts among different surgeons. Patients’ radiation exposure was also assessed.MethodsThe radiation absorption of a team of vascular surgeons was prospectively monitored in a 12-month period. During each endovascular procedure, the effective body, eye, and hand radiation doses of all participating surgeons were measured by mini-thermoluminescent dosimeters (TLD) attached at the chest level under a lead apron, at the forehead at eye level, and at the hand. The type of procedure, fluoroscopy machine, fluoroscopy time, and personal and operating theatre radiation protection devices used in each procedure were also recorded. One TLD was attached to the patient’s body near the operative site to measure the patient’s dose. The yearly effective body, eye, and hand dose were compared with the safety limits of radiation for occupational exposure recommended by the International Commission on Radiation Protection (ICRP). The radiation absorption of various body parts per minute of fluoroscopy was compared among different surgeons.ResultsA total of 149 consecutive endovascular procedures were performed, including 30 endovascular aortic repairs (EVAR), 58 arteriograms with and without embolization (AGM), and 61 percutaneous transluminal angioplasty and stent (PTA/S) procedures. The cumulative fluoroscopy time was 1132 minutes. The median yearly effective body, eye, and hand dose for the surgeons were 0.20 mSv (range, 0.13 to 0.27 mSv), 0.19 mSv (range, 0.10 to 0.33 mSv) and 0.99 mSv (0.29 to 1.84 mSv) respectively, which were well below the safety limits of the ICRP. The mean body, eye, and hand dose of the chief surgeon per procedure were highest for EVAR. A significant discrepancy was observed for the average hand dose per minute of fluoroscopy among different surgeons. The mean radiation absorption of patients who underwent EVAR, AGM, and PTA/S was 12.7 mSv, 13.6 mSv, and 3.4 mSv, respectively.ConclusionWith current radiation protection practice, the radiation absorbed by vascular surgeons with a high endovascular workload did not exceed the safety limits recommended by ICRP. Variations in practice, however, can result in significant discrepancy of radiation absorption between surgeons

A sustainable biochar catalyst synergized with copper heteroatoms and CO2 for singlet oxygenation and electron transfer routes

We have developed a wood waste-derived biochar as a sustainable graphitic carbon catalyst for environmental remediation through catalytic pyrolysis under the synergistic effects between Cu heteroatoms and CO2, which for the first time are found to significantly enhance the oxygen functionalities, defective sites, and highly ordered sp2-hybridized carbon matrix. The copper-doped graphitic biochars (Cu-GBCs) were further characterized by XRD, FTIR, Raman, XPS, etc., revealing that the modified specific surface area, pore structure, graphitization, and active sites (i.e., defective sites and ketonic group) on the Cu-GBCs corresponded to the synergistic Cu species loading and Cu-induced carbon-matrix reformation in CO2 environment during pyrolysis. The catalytic ability of Cu-GBCs was evaluated using the ubiquitous peroxydisulfate (PDS) activation system for the removal of various organic contaminants (i.e., rhodamine B, phenol, bisphenol A, and 4-chlorophenol), and gave the highest degradation rate of 0.0312 min-1 in comparison with those of pristine GBCs and N2-pyrolyzed Cu-GBCs ranging from 0.0056 to 0.0094 min-1. The synergistic effects were attributed to the encapsulated Cu heteroatoms, evolved ketonic groups, and abundant unconfined π electrons within the carbon lattice. According to scavenger experiments, ESR analysis, and two-chamber experiments, selective and sustainable non-radical pathways (i.e., singlet oxygenation and electron transfer) mediated by the Cu-induced metastable surface complex were achieved in the Cu-GBC/PDS system. This study offers the first insights into the efficacy, sustainability, and mechanistic roles of Cu-GBCs as an emerging carbon-based catalyst for green environmental remediation

Electronic Structures of Quantum Dots and the Ultimate Resolution of Integers

The orbital angular momentum L as an integer can be ultimately factorized as a product of prime numbers. We show here a close relation between the resolution of L and the classification of quantum states of an N-electron 2-dimensional system. In this scheme, the states are in essence classified into different types according to the m(k)-accessibility, namely the ability to get access to symmetric geometric configurations. The m(k)-accessibility is an universal concept underlying all kinds of 2-dimensional systems with a center. Numerical calculations have been performed to reveal the electronic structures of the states of the dots with 9 and 19 electrons,respectively. This paper supports the Laughlin wave finction and the composite fermion model from the aspect of symmetry.Comment: Two figure

Efficient Depolymerization of Cellulosic Paper Towel Waste Using Organic Carbonate Solvents

Efficient depolymerization of lignocellulosic biomass is a prerequisite for sugar production and its subsequent upgradation to fuels and chemicals. Organic carbonate solvents, i.e., propylene carbonate (PC), ethylene carbonate (EC), and dimethyl carbonate (DMC), which are low in toxicity and biodegradable, were investigated as "green"co-solvents (PC/H2O, EC/H2O, DMC/H2O, solvent ratio 1:1) for depolymerization of cellulosic paper towel waste. PC/H2O and EC/H2O enhanced the depolymerization of paper towel waste and improved the total sugar yield (up to ∼25 C mol %) compared to H2O only (up to ∼11 C mol %) under mild reaction conditions (130 °C, 20 min). The higher performance of PC/H2O and EC/H2O can be attributed to higher availability of reactive protons in the catalytic system that facilitates efficient acid hydrolysis of recalcitrant cellulosic fibers. Moreover, a substantial buildup of in-vessel pressure by CO2 release during the microwave-assisted reaction because of decomposition of PC or EC might have accelerated the conversion of paper towel wastes. PC and EC are prospective solvents for lignocellulosic biomass conversion considering their green features and notable catalytic performance, which have a good potential for substituting conventional organic solvents such as dimethyl sulfoxide (DMSO) and tetrahydrofuran (THF) that are often considered hazardous in terms of health, safety, and environmental implications