794 research outputs found
Crossed molecular beam study of the reactive scattering of K + I2 - Product KI recoil /velocity-angle/ distributions and energy dependence of reaction cross section
Molecular beam study of reaction of velocity selected potassium beam crossed with thermal iodine bea
Recommended from our members
Nuclear power plant accident simulations of gasket materials under simultaneous radiation plus thermal plus mechanical stress conditions
In order to probe the response of silicone door gasket materials to a postulated severe accident in an Italian nuclear power plant, compression stress relaxation (CSR) and compression set (CS) measurements were conducted under combined radiation (approximately 6 kGy/h) and temperature (up to 230{degrees}C) conditions. By making some reasonable initial assumptions, simplified constant temperature and dose rates were derived that should do a reasonable job of simulating the complex environments for worst-case severe events that combine overall aging plus accidents. Further simplification coupled with thermal-only experiments allowed us to derive thermal-only conditions that can be used to achieve CSR and CS responses similar to those expected from the combined environments that are more difficult to simulate. Although the thermal-only simulations should lead to sealing forces similar to those expected during a severe accident, modulus and density results indicate that significant differences in underlying chemistry are expected for the thermal-only and the combined environment simulations. 15 refs., 31 figs., 15 tabs
Recommended from our members
Limitations of the Arrhenius Methododolgy
The Arrhenius methodology has been utilized for many years to NOV 171998 predict polymer lifetimes in various applications. Unfortunately, there are numerous potential limitations associated with this methodology, o ST I many of which can lead to non-Arrhenius behavior. This paper will review several of these limitations, including a brief mention of diffusion-limited oxidation (DLO) effects and a more extensive discussion of the implication of changes in the effective Arrhenius activation energy E. or in the dominant reactions as the temperature changes. Changes in Ea or in the dominant reactions with temperature can happen for any material, making extrapolations beyond the experimental temperature range problematic. Unfortunately, when mechanistic changes occur, they invariably result in a reduction in effective Arrhenius activation energy, leading to lower than expected material lifetimes. Thus it is critically important to derive methods for testing the Arrhenius extrapolation assumption. One approach that we have developed involves ultrasensitive oxygen consumption measurements. Results from the application of this approach will be reviewed
Recommended from our members
Methods for Predicting More Confident Lifetimes of Seals in Air Environments
We have been working for many years to develop improved methods for predicting the lifetimes of polymers exposed to air environments and have recently turned our attention to seal materials. This paper describes an extensive study on a butyl material using elevated temperature compression stress-relaxation (CSR) techniques in combination with conventional oven aging exposures. The results initially indicated important synergistic effects when mechanical strain is combined with oven aging, as well as complex, non-Arrhenius behavior of the CSR results. By combining modeling and experiments, we show that diffusion-limited oxidation (DLO) anomalies dominate traditional CSR experiments. A new CSR approach allows us to eliminate DLO effects and recover Arrhenius behavior. Furthermore, the resulting CSR activation energy (E{sub a}) from 125 C to 70 C is identical to the activation energies for the tensile elongation and for the oxygen consumption rate of unstrained material over similar temperature ranges. This strongly suggests that the same underlying oxidation reactions determine both the unstrained and strained degradation rates. We therefore utilize our ultrasensitive oxygen consumption rate approach down to 23 C to show that the CSR E{sub a} likely remains unchanged when extrapolated below 70 C, allowing very confident room temperature lifetime predictions for the butyl seal
Recommended from our members
Better Methods for Predicting Lifetimes of Seal Materials
We have been working for many years to develop better methods for predicting the lifetimes of polymer materials. Because of the recent interest in extending the lifetimes of nuclear weapons and the importance of environmental seals (o-rings, gaskets) for protecting weapon interiors against oxygen and water vapor, we have recently turned our attention to seal materials. Perhaps the most important environmental o-ring material is butyl rubber, used in various military applications. Although it is the optimum choice from a water permeability perspective, butyl can be marginal from an aging point-of-view. The purpose of the present work was to derive better methods for predicting seal lifetimes and applying these methods to an important butyl material, Parker compound B6 12-70
Student Outcomes from the Collective Design and Delivery of Culturally Relevant Engineering Outreach Curricula in Rural and Appalachian Middle Schools
Middle school is a pivotal time for career choice, and research is rich with studies on how students perceive engineering, as well as
corresponding intervention strategies to introduce younger students to engineering and inform their conceptions of engineering.
Unfortunately, such interventions are typically not designed in culturally relevant ways. Consequently, there continues to be a lack
of students entering engineering and a low level of diverse candidates for this profession. The purpose of this study was to explore
how students in rural and Appalachian Virginia conceive of engineering before and after engagement with culturally relevant
hands-on activities in the classroom. We used student responses to the Draw an Engineer Test (DAET), consisting of a drawing
and several open-ended prompts administered before and after the set of engagements, to answer our research questions related to
changes in students’ conceptions of engineering. We used this study to develop recommendations for teachers for the use of such
engineering engagement practices and how to best assess their outcomes, including looking at the practicality of the DAET.
Overall, we found evidence that our classroom engagements positively influenced students’ conceptions of engineering in these
settings
Imaging biomarkers of adiposity and sarcopenia as potential predictors for overall survival among patients with endometrial cancer treated with bevacizumab
Objective:To examine associations of body mass index (BMI), subcutaneous fat area (SFA) and density (SFD), visceral fat area (VFA) and density (VFD) and total psoas area (TPA) to outcomes among patients receiving chemotherapy with or without bevacizumab for advanced or recurrent endometrial cancer (EC). Methods:This was a multi-institutional, retrospective study of patients with EC treated with and without bevacizumab as part of front-line, platinum based chemotherapy. Demographics and clinical characteristics were collected. SFA, VFA, SFD, VFD, and TPA were determined from pre-treatment CT scans using a deep learning algorithm. Data was compared with overall survival (OS) and progression free survival (PFS). Results:Seventy-eight patients were analyzed. The majority were Caucasian (87.2%) with a mean BMI of 34.7 kg/m2. PFS and OS did not differ between patients with BMI, SFA, VFA, SFD, VFD, or TPA ≥ the 50th percentile compared to <50th percentile (p = 0.91, 0.45, 0.71, 0.74, 0.60, and 0.74 respectively) and (p = 0.99, 0.59, 0.14, 0.77, and 0.85 respectively). When adjusting for prognostic factors, elevated VFA trended towards shorter OS (25.1 vs 59.5 months, HR = 1.68 [0.92-3.05]).Patients receiving bevacizumab had similar OS compared to those who did not (37.6 vs 44.5 months, p = 0.409). When stratified by adiposity markers, no subset demonstrated benefit from bevacizumab. Conclusion:Obesity has been associated with increased levels of vascular endothelial growth factor (VEGF), the main target for bevacizumab therapy. Imaging measurements of VFA may provide prognostic information for patients with EC but no adiposity marker was predictive of improved response to bevacizumab
Fullerene-based materials research and development. LDRD final report
The chemistry and physical properties of fullerenes, the third, molecular allotrope of carbon, have been studied using both experimental and computational techniques. Early computational work investigated the stability of fullerene isomers and oxides, which was followed by extensive work on hydrogenated fullerenes. Our work led to the first synthesis of a polymer containing C{sub 60} and the synthesis of the simplest hydrocarbon derivatives of C{sub 60} and C{sub 70}. The excellent agreement between theory and experiment ({plus_minus} 0.1 kcal/mol in the relative stability of isomers) has provided insight into the chemical nature of fullerenes and has yielded a sound basis for prediction of the structure of derivatized fullerenes. Such derivatives are the key to the preparation of fullerene-based materials
Mechanical and Electronic Properties of MoS Nanoribbons and Their Defects
We present our study on atomic, electronic, magnetic and phonon properties of
one dimensional honeycomb structure of molybdenum disulfide (MoS) using
first-principles plane wave method. Calculated phonon frequencies of bare
armchair nanoribbon reveal the fourth acoustic branch and indicate the
stability. Force constant and in-plane stiffness calculated in the harmonic
elastic deformation range signify that the MoS nanoribbons are stiff quasi
one dimensional structures, but not as strong as graphene and BN nanoribbons.
Bare MoS armchair nanoribbons are nonmagnetic, direct band gap
semiconductors. Bare zigzag MoS nanoribbons become half-metallic as a
result of the (2x1) reconstruction of edge atoms and are semiconductor for
minority spins, but metallic for the majority spins. Their magnetic moments and
spin-polarizations at the Fermi level are reduced as a result of the
passivation of edge atoms by hydrogen. The functionalization of MoS
nanoribbons by adatom adsorption and vacancy defect creation are also studied.
The nonmagnetic armchair nanoribbons attain net magnetic moment depending on
where the foreign atoms are adsorbed and what kind of vacancy defect is
created. The magnetization of zigzag nanoribbons due to the edge states is
suppressed in the presence of vacancy defects.Comment: 11 pages, 5 figures, first submitted at November 23th, 200
- …