A Method to Relate the Affecting Parameters and Estimate Dilution in Coal Mines

This study provides an overview of the various issues influencing Out-of-Seam Dilution (OSD) in longwall mining method. The collected data has been statistically analyzed to examine the effect of the some factors causing OSD in front of the longwall mining face. Multiple parameter regression analysis was conducted on affecting parameters and the OSD. The SPSS (Statistics Package for Social Sciences) for Windows software package was used for the statistics analysis. Finally, a relationship between affecting parameters and the OSD is established by using the multiple parameter regression results. Results of this study have revealed that depth of seam, dip of seam, roof quality and variation in seam thickness are the most important influence factors for OSD. The proposed method may be utilized for the estimation of OSD for similar mines since, it was based on actual collected data from the coal mines

Band offsets of metal oxide contacts on TlBr radiation detectors

Metal oxides are investigated as an alternative to metal contacts on thallium bromide (TlBr) radiation detectors. X-ray photoelectron spectroscopy studies of SnO 2/TlBr and ITO/TlBr devices indicate that a type-II staggered heterojunction forms between TlBr and metal oxides upon contacting. By using the Kraut method of valence band offset (VBO) determination, the VBOs of SnO 2/TlBr and ITO/TlBr heterojunctions are determined to be 1.05 ± 0.17 and 0.70 ± 0.17 eV, respectively. The corresponding conduction band offsets are then found to be 0.13 ± 0.17 and 0.45 ± 0.17 eV, respectively. The I-V response of symmetric In/SnO 2/TlBr and In/ITO/TlBr planar devices is almost Ohmic with a leakage current of less than 2.5 nA at 100 V

Magnetic Damping of Solid Solution Semiconductor Alloys

The objective of this study is to: (1) experimentally test the validity of the modeling predictions applicable to the magnetic damping of convective flows in electrically conductive melts as this applies to the bulk growth of solid solution semiconducting materials; and (2) assess the effectiveness of steady magnetic fields in reducing the fluid flows occurring in these materials during processing. To achieve the objectives of this investigation, we are carrying out a comprehensive program in the Bridgman and floating-zone configurations using the solid solution alloy system Ge-Si. This alloy system has been studied extensively in environments that have not simultaneously included both low gravity and an applied magnetic field. Also, all compositions have a high electrical conductivity, and the materials parameters permit reasonable growth rates. An important supporting investigation is determining the role, if any, that thermoelectromagnetic convection (TEMC) plays during growth of these materials in a magnetic field. TEMC has significant implications for the deployment of a Magnetic Damping Furnace in space. This effect will be especially important in solid solutions where the growth interface is, in general, neither isothermal nor isoconcentrational. It could be important in single melting point materials, also, if faceting takes place producing a non-isothermal interface. In conclusion, magnetic fields up to 5 Tesla are sufficient to eliminate time-dependent convection in silicon floating zones and possibly Bridgman growth of Ge-Si alloys. In both cases, steady convection appears to be more significant for mass transport than diffusion, even at 5 Tesla in the geometries used here. These results are corroborated in both growth configurations by calculations

Reduction of Defects in Germanium-Silicon

It is well established that crystals grown without contact with a container have far superior quality to otherwise similar crystals grown in direct contact with a container. In addition to float-zone processing, detached-Bridgman growth is often cited as a promising tool to improve crystal quality, without the limitations of float zoning. Detached growth has been found to occur quite often during microgravity experiments and considerable improvements of crystal quality have been reported for those cases. However, no thorough understanding of the process or quantitative assessment of the quality improvements exists so far. This project will determine the means to reproducibly grow Ge-Si alloys in the detached mode. Specific objectives include: (1) measurement of the relevant material parameters such as contact angle, growth angle, surface tension, and wetting behavior of the GeSi-melt on potential crucible materials; (2) determination of the mechanism of detached growth including the role of convection; (3) quantitative determination of the differences of defects and impurities among normal Bridgman, detached Bridgman, and floating zone (FZ) growth; (4) investigation of the influence of defined azimuthal or meridional flow due to rotating magnetic fields on the characteristics of detached growth; (5) control time-dependent Marangoni convection in the case of FZ-growth by the use of a rotating magnetic field to examine the influence on the curvature of the solid-liquid interface and the heat and mass transport; and (6) grow high quality GeSi-single crystals with Si-concentration up to 10 at% and diameters up to 20 mm

Reduction of Allergenicity of Litchi chinensis Flowers Pollen Protein Conjugated with Polysaccharide by Maillard Reaction

Background: Allergy to pollen from gymnosperms is well documented in the west. The objective was to define the allergologic protein from Litchi chinensis (Litchi) pollen and conjugate the protein with polysaccharides by Maillard reaction to reduce the allergic effect of that protein. Methods: Total soluble proteins were extracted from the pollen of Litchi flower pollen and subjected to ammonium sulphate precipitation at 80% saturation. Pollen antigen from Litchi chinensis (Litchi) was prepared by gel cutting method and characterized by biochemical and designated by LFPP. The homogeneity of this protein was demonstrated by a single band on SDS-PAGE. The protein then conjugated with galactomannan through Maillard Reaction. The resulting purified pollen protein and conjugated protein were administered to the Swiss albino mice as amount of 5.8mg/kg body weight. Results: The total protein was then separated on a 12% SDS-Polyacrylamide gel which revealed 5 bands between molecular weight range of 29kDa and 69kDa. Each band was recovered from the gel by electroelution and sent for skin tests. 28kDa proteins was the only allergenic protein while others were not shown reactivity in patients. Intraperitoneal injection of the purified protein (LFPP) caused a significant rise in the levels of neutrophils (38-81%) and eosinophils (3-14%) compared to control (P<0.001) whereas conjugated protein caused only a 2% increase of both neutrophils and eosinophils level. On the other hand treatment with LFPP-galactomannan conjugate causes no such change in physical appearance with eosinophils and neutrophils level. Conclusion: The present study demonstrates that the protein extracted and purified from Litchi flowers pollen has been recognized as a new allergen from Bangladesh for the first time and the allergic effects can be reduced by conjugation with polysaccharides

ISRM suggested methods for determining the creep characteristics of rock

It is important to note that creep is only one aspect of the time-dependent behavior of rocks. In Fig. 1, three cases are illustrated with respect to the complete stress–strain curve: creep, i.e., increasing strain when the stress is held constant; stress relaxation, i.e., decreasing stress when the strain is held constant; and a combination of both, when the rock unloads along a chosen unloading path. This ISRM suggested method deals only with the case of creep, which is particularly relevant for cases where the applied load or stress is kept constant. Creep tests have also been carried out on soft rocks such as tuff, shale, lignite, and sandstone, medium-hard rocks such as marble, limestone, and rock salt, and hard rocks such as granite and andesite (i.e., Akagi 1976; Akai et al. 1979, 1984; Ito and Akagi 2001; Berest et al. 2005; Doktan 1983; Passaris 1979; Serata et al. 1968; Wawersik 1983; Okubo et al. 1991, 1993; Masuda et al. 1987, 1988; Ishizuka et al. 1993; Lockner and Byerlee 1977; Boukharov et al. 1995; Fabre and Pellet 2006; Aydan et al. 1995; Chan 1997; Cristescu and Hunsche 1998; Hunsche 1992; Hunsche and Hampel 1999; Ito et al. 1999; Mottahed and Szeki 1982; Perzyna 1966; Slizowski and Lankof 2003; Yang et al. 1999). These experiments were mostly carried out under compressive loading conditions. There are few studies on rocks using creep tests under a tensile loading regime (Ito and Sasajima 1980, 1987; Ito et al. 2008; Aydan et al. 2011). In particular, shallow underground openings may be subjected to a sustained tensile stress regime, which requires the creep behavior of rocks under such conditions.http://link.springer.com/journal/603hb201

Band offsets of metal oxide contacts on TlBr radiation detectors

Metal oxides are investigated as an alternative to metal contacts on thallium bromide (TlBr) radiation detectors. X-ray photoelectron spectroscopy studies of SnO 2/TlBr and ITO/TlBr devices indicate that a type-II staggered heterojunction forms between TlBr and metal oxides upon contacting. By using the Kraut method of valence band offset (VBO) determination, the VBOs of SnO 2/TlBr and ITO/TlBr heterojunctions are determined to be 1.05 ± 0.17 and 0.70 ± 0.17 eV, respectively. The corresponding conduction band offsets are then found to be 0.13 ± 0.17 and 0.45 ± 0.17 eV, respectively. The I-V response of symmetric In/SnO 2/TlBr and In/ITO/TlBr planar devices is almost Ohmic with a leakage current of less than 2.5 nA at 100 V

Real-time PCR assay and rapid diagnostic tests for the diagnosis of clinically suspected malaria patients in Bangladesh

<p>Abstract</p> <p>Background</p> <p>More than 95% of total malaria cases in Bangladesh are reported from the 13 high endemic districts. <it>Plasmodium falciparum </it>and <it>Plasmodium vivax </it>are the two most abundant malaria parasites in the country. To improve the detection and management of malaria patients, the National Malaria Control Programme (NMCP) has been using rapid diagnostic test (RDT) in the endemic areas. A study was conducted to establish a SYBR Green-based modified real-time PCR assay as a gold standard to evaluate the performance of four commercially-available malaria RDTs, along with the classical gold standard- microscopy.</p> <p>Methods</p> <p>Blood samples were collected from 338 febrile patients referred for the diagnosis of malaria by the attending physician at Matiranga</p> <p>Upazila Health Complex (UHC) from May 2009 to August 2010. Paracheck RDT and microscopy were performed at the UHC. The blood samples were preserved in EDTA tubes. A SYBR Green-based real-time PCR assay was performed and evaluated. The performances of the remaining three RDTs (Falcivax, Onsite Pf and Onsite Pf/Pv) were also evaluated against microscopy and real-time PCR using the stored blood samples.</p> <p>Result</p> <p>In total, 338 febrile patients were enrolled in the study. Malaria parasites were detected in 189 (55.9%) and 188 (55.6%) patients by microscopy and real-time PCR respectively. Among the RDTs, the highest sensitivity for the detection of <it>P. falciparum </it>(including mixed infection) was obtained by Paracheck [98.8%, 95% confidence interval (CI) 95.8-99.9] and Falcivax (97.6%, 95% CI 94.1-99.4) compared to microscopy and real-time PCR respectively. Paracheck and Onsite Pf/Pv gave the highest specificity (98.8%, 95% CI 95.7-99.9) compared to microscopy and Onsite Pf/Pv (98.8, 95% CI 95.8-99.9) compared to real-time PCR respectively for the detection of <it>P. falciparum</it>. On the other hand Falcivax and Onsite Pf/Pv had equal sensitivity (90.5%, 95% CI 69.6-98.8) and almost 100% specificity compared to microscopy for the detection of <it>P. vivax</it>. However, compared to real-time PCR assay RDTs and microscopy gave low sensitivity (76.9%, 95% CI 56.4-91) in detecting of <it>P. vivax </it>although a very high specificity was obtained (99- 100%).</p> <p>Conclusion</p> <p>The results of this study suggest that the SYBR Green-based real-time PCR assay could be used as an alternative gold standard method in a reference setting. Commercially-available RDTs used in the study are quite sensitive and specific in detecting <it>P. falciparum</it>, although their sensitivity in detecting <it>P. vivax </it>was not satisfactory compared to the real-time PCR assay.</p