ANALYTICAL STANDARDIZATION OF TAMRA YOGA

Rasa Shastra is a specialized branch of Ayurveda which mainly deals with the pharmaceutics of unique and potent preparations. Tamra Yoga is an important Rasa Oushadi mentioned in Rasa Tantra Sara Va Siddha Prayoga Sangraha which contains Tamra Bhasma, Yashtimadhu, Chincha Kshara, Trikatu, Sauvarchala lavana and Hingu. Shodhana, Bhavana, Marana, Amrutikarana, Chincha Kshara nirmana and Churna nirmana are the main pharmaceutical procedures employed in the preparation of Tamra Yoga. To assess the toxicity, safety and to understand the structural and chemical composition, it was tested through various modern analytical parameters like X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray spectroscopy (EDS), Particle size analysis (PSA), Zeta Potential (ZP), UV-Spectroscopy, Fourier transform Infra-Red spectroscopy (FTIR) and Inductively Coupled Plasma – Optical Emission Spectrometry (ICP-OES). XRD of Tamra Yoga shows major peaks of KCl (Potassium Chloride), CuS (Copper Sulphide) and minor peaks of HgS (Cinnabar), NaCl (Sodium Chloride), CaS (Calcium Sulphide) and ZnP4 (Zinc Phosphide), K2Fe2O4 (Potassium Iron Oxide). SEM micrographs showed an agglomeration of crystalline irregular sharped particles; EDS analysis confirmed the significant presence of elements viz. O-27.91%, S-21.83%, Cu-26.87% and Hg- 14.29%, K- 3.46%; Particle size was found to be 337.9nm and its Zeta Potential is -12.1mV. UV- Spectrum of Tamra Yoga showed maximum absorption at 307 nm; FT-IR analysis showed 11 peaks between the wavelengths 3356.21 - 418.34 cm-1 and ICP–OES analysis revealed Potassium as main constituent in 14376.50 ppm

Application of Taguchi approach and Utility Concept in solving the Multi-objective Problem when

The traditional Taguchi method is widely used for optimizing the process parameters of a single response problem. Optimizationof a single response results the non-optimum values for remaining. But, the performance of the manufactured products isoften evaluated by several quality characteristics/responses. Under such circumstances, multi-characteristics response optimizationmay be the solution to optimize multi-responses simultaneously. In the present work, a multi-characteristics responseoptimization model based on Taguchi and Utility concept is used to optimize process parameters, such as speed, feed, depthof cut, and nose radius on multiple performance characteristics, namely, surface roughness (Ra) and material removal rate(MRR) during turning of AISI 202 austenitic stainless steel using a CVD coated cemented carbide tool. Taguchi’s L8 orthogonalarray (OA) is selected for experimental planning. The experimental result analysis showed that the combination of higherlevels of cutting speed, depth of cut, and nose radius and lower level of feed is essential to achieve simultaneous maximizationof material removal rate and minimization of surface roughness. The ANOVA and F-tests are used to analyze the results.Further, the confirmation tests are conducted and the results are found to be within the confidence interval

Tweet Scrutiny For Fast Communication Reporting

The major target of the system is develop a new earthquake detection algorithm it is used for To speed-up the detection process and  reduce false detections.But here having one problem is Absence of evidence is not evidence of absence”Why? Because traditional phase associators do not know If the missing station is broken.  If not, when the pick for that station will be made available. That is used for Detection bases ONLY on the presence of picks in a certain time-window. Assumption: If the network is reliable, all the operating stations in the surrounding of the epicenter will detect ground motion change and the picker will produce a P-wave detections with a a priori known delay. If the network is reliable, we can look only at close stations.   The number of words in a tweet message and the position of the query within a tweet. We can apply methods for sensory data detection to tweets processing

RE-GRADE MODEL FOR LABEL BASED ICON SEARCH

An easy approach must be to attach the whole routing path in each and every packet. The publication within the approach is its message overhead may be large for packets with extended routing pathways. While using the routing route to each packet, many measurement and diagnostic approaches can conduct effective management and protocol optimizations for deployed WSNs made up of a great deal unwatched sensor nodes. own path features a novel an easy-weight hash function for verification within the deduced pathways. To be able to further boost the inference capacity along with execution efficiency, own path features a fast bootstrapping formula to rebuild the very first number of pathways. To really increase the risk for iterative boosting effective and efficient, two problems have to be addressed. The hash function ought to be lightweight and efficient enough since it should be focus on resource-restricted sensor nodes. While using the routing route to each packet, many measurement and diagnostic approaches can conduct effective management and protocol optimizations for deployed WSNs made up of a great deal unwatched sensor nodes. We implement own path and evaluate its performance using traces from large-scale WSN deployments additionally to extensive simulations. Results show own path achieves much greater renovation ratios under different network settings when compared with other condition-of-the-art approaches. When compared with PathZip, own path exploits high path similarity between multiple packets for fast inference, leading to far better scalability

Ionic mass transfer at point electrodes located at cathode support plate in an electrorefining cell in presence of rectangular turbulent promoters

Current density plays a major role in deciding the plant size, current efficiency, and energy consumption in electrorefining cells. In general, operating current density will be 40% of the limiting current density. Forced circulation of the electrolyte in the presence of promoters improves the mass transfer coefficient. In the present study, rectangular turbulence promoters are fitted at the bottom side of the cell to improve the mass transfer coefficient at the cathode support plate. The limiting current density technique is used to measure the mass transfer coefficient. The variables covered in the present study are the effects of flow rate, promoter height, and spacing among the promoters. The electrolyte consists of copper sulfate and sulphuric acid. At a regulated flow rate, the electrolyte is pumped from the recirculation tank to the cell through an intermediate overhead tank. The limiting current density increased with an increasing flow rate in the presence of promoters, and thus the overall mass transfer coefficient on the cathode support plate also improved. With an increase in the flow rate of the electrolyte from 6.67 × 10−6 to 153.33 m3/s, limiting current density increased from 356.8 to 488.8 A/m2 for spacing of 0.30 m, with a promoter height of 0.01 m. However, it is noteworthy that when the promoter height is increased from 0.01 to 0.07 m, the overall mass transfer coefficient is found to increase up to 60%, but with the further increase in the promoter height to 0.30 m the mass transfer coefficient starts to decrease. Therefore, the optimized cell parameters are established in this work. The current sustainable concept of employing rectangular turbulence promoters will bring benefits to any precious metal refining or electrowinning tank house electrolytes

ANALYTICAL STANDARDIZATION OF RAJATA BHASMA

Bhasma Kalpana is a unique part of Ayurvedic Rasa shastra. It is a method of converting metals into metallic Bhasma. Metallic Bhasmas are well known for its quick effectiveness, smaller dose and a long shelf life. However if these Bhasmas are not well prepared and analyzed they can be toxic to human body. Therefore Bhasma Pariksha is given in Ayurveda to confirm the well prepared metallic Bhasma, but in this era we need to analyze the Bhasmas on modern parameters too to make it acceptable globally. So in this study prepared Rajata (Silver) Bhasma is analyzed on various parameters i.e. Ayuvedic parameters i.e., Varitaratwa, Rekhapurnatwa, Slakshantwa and Laghutwa and some modern parameters like, pH, Particle size, Zeta Potential, X-ray Diffraction (XRD), Scanning Electron Microscopy (SEM), Energy dispersive X-ray spectroscopy, Fourier Transform Infra red Spectroscopy (FTIR), U V – Spectroscopy. Results: pH value is 5.6, UV- spectroscopy showed maximum absorption at 302nm, FT-IR of Rajata bhasma reveals the presence of C-H (alkyl), C-N (Aliphatic amine) groups at different wavelengths, Mean Particle size of Rajata bhasma is 2.7nm, Zeta Potential analysis reveals -19.3 mV, X-RD of Rajata bhasma reaveals the major peaks of HgS (Cinnabar), Ag2S (Silver Sulphide), SEM analysis of Rajata bhasma showed small crystalline particles at 5KX & 10KX magnifications, EDX analysis of Rajata bhasma confirmed the presence of elements viz., Sulphur 20.34%, Oxygen 7.43%, Silver 26.72%, Mercury 45.51% by weight

Identification of Tubercle Bacilli from Indian Patients with Pulmonary Tuberculosis

Pretreatment cultures of bacilli from Indian patients with active pulmonary tuberculosis admitted to a controlled domiciliary chemotherapy study by the Tuberculosis Chemotherapy Centre, Madras, were subjected to a series of in vitro tests designed to identify the bacilli as human or bovine tubercle bacilli, or as anonymous mycobacteria. For the purposes of comparison, pretreatment cultures from British patients with pulmonary tuberculosis were examined by the same series of identification tests. Cultures identifiable as mammalian tubercle bacilli were obtained from all the 341 Indian patients admitted to the chemotherapy study. Tests for niacin production were carried out on the cultures from 277 of these patients ; all gave positive results, indicating that the bacilli in question were Mycobacterium tuberculosis var. hominis. The culture from the Indian patients yielded results similar to those of the cultures from the British patients in all the in vitro tests except the thiacetazone-sensitivity test. In this test the Indian cultures differed from the British cultures, being on the average less sensitive and showing greater variation in sensitivity among themselves

INSIGHT OF METHANOLIC EXTRACT OF VENTILAGO MADERASPATANA LEAVES ON HEPATOPROTECTIVE ACTIVITY UNDER STREPTOZOTOCIN-INDUCED DIABETIC RATS

Objective: The methanolic leaf extract of Ventilago maderaspatana (MEVML, 200 mg/kg body weight [b.w.]) was investigate to hepatoprotective activity under streptozotocin-induced (45 mg/kg b.w.) diabetic (Di) rats. Methods: In the present study, we determined the blood glucose levels, b.w., insulin, creatinine, and bilirubin levels in normal, Di, Di treated with MEVML and positive control rats. Results: The Di rats shown adverse changes in blood glucose levels, b.w., insulin, creatinine, and bilirubin levels when compared to other group rats. Reverse the adverse changes in the above parameters when treated the Di rats with MEVML Conclusion: The MEVML shown anti-diabetic activity and reverse the adverse changes in the above parameters in liver so that the MEVML supported the traditional claim of the hepatoprotective activity under Di condition

Ocimum sanctum: a review on the pharmacological properties

Herbal medicine, the backbone of traditional medicine in many countries have played an important role in curing the diseases of humans since ancient time. Medicinal plants are great source of bioactive compounds and chemical structures that have potential beneficial effects. The present review compiles information on ethnopharmacologically useful information and pharmacological properties of Ocimum sanctum. Ocimum sanctum (OS) has many medicinal properties like antioxidant, antidiabetic, antiulcer, anticancer, antibacterial, antifungal and other. The phytochemicals compounds of Ocimum, alkaloids, flavonoids, phenolics, essential oils, tannins and saponins play an important role in herbal medicine. Bioactive compounds of Ocimum responsible for its various medicinal properties and their effects at the molecular level need to be investigated in more detail. Furthermore, pharmacological properties of bioactive compounds in Ocimum sanctum are required to confirm the ethnomedicinal claims of Ocimum sanctum for pharmaceutical therapeutic applications