Precision Measurement of the Ds∗+−Ds+D_s^{*+}- D_s^+ Mass Difference

We have measured the vector-pseudoscalar mass splitting $M(D_s^{*+})-M(D_s^+) = 144.22\pm 0.47\pm 0.37 MeV$, significantly more precise than the previous world average. We minimize the systematic errors by also measuring the vector-pseudoscalar mass difference $M(D^{*0})-M(D^0)$ using the radiative decay $D^{*0}\rightarrow D^0\gamma$, obtaining $[M(D_s^{*+})-M(D_s^+)]-[M(D^{*0})-M(D^0)] = 2.09\pm 0.47\pm 0.37 MeV$. This is then combined with our previous high-precision measurement of $M(D^{*0})-M(D^0)$, which used the decay $D^{*0}\rightarrow D^0\pi^0$. We also measure the mass difference $M(D_s^+)-M(D^+)=99.5\pm 0.6\pm 0.3$ MeV, using the $\phi\pi^+$ decay modes of the $D_s^+$ and $D^+$ mesons.Comment: 18 pages uuencoded compressed postscript (process with uudecode then gunzip). hardcopies with figures can be obtained by sending mail to: [email protected]

Electrically addressable vesicles: Tools for dielectrophoresis metrology

Dielectrophoresis (DEP) has emerged as an important tool for the manipulation of bioparticles ranging from the submicron to the tens of microns in size. Here we show the use of phospholipid vesicle electroformation techniques to develop a new class of test particles with specifically engineered electrical propserties to enable identifiable dielectrophoretic responses in microfabricated systems. These electrically addressable vesicles (EAVs) enable the creation of electrically distinct populations of test particles for DEP. EAVs offer control of both their inner aqueous core and outer membrane properties; by encapsulating solutions of different electrolyte strength inside the vesicle and by incorporating functionalized phospholipids containing poly(ethylene glycol) (PEG) brushes attached to their hydrophilic headgroup in the vesicle membrane, we demonstrate control of the vesicles’ electrical polarizabilities. This combined with the ability to encode information about the properties of the vesicle in its fluorescence signature forms the first steps toward the development of EAV populations as metrology tools for any DEP-based microsystem.National Institutes of Health (U.S.) (Grant RR199652)National Institutes of Health (U.S.) (Grant EB005753)Merck/CSBi (Fellowship)Solomon Buchsbaum AT&T Research Fun

Observation of a New Charmed Strange Meson

Using the CLEO-II detector, we have obtained evidence for a new meson decaying to $D^0 K^+$. Its mass is $2573.2^{+1.7}_{-1.6}\pm 0.8\pm 0.5$ {}~MeV/$c^2$ and its width is $16^{+5}_{-4}\pm 3$~MeV/$c^2$. Although we do not establish its spin and parity, the new meson is consistent with predictions for an $L=1$, $S=1$, $J_P=2^+$ charmed strange state.Comment: 9 pages uuencoded compressed postscript (process with uudecode then gunzip). hardcopies with figures can be obtained by sending mail to: [email protected]

Semileptonic Branching Fraction of Charged and Neutral B Mesons

An examination of leptons in ${\Upsilon (4S)}$ events tagged by reconstructed $B$ decays yields semileptonic branching fractions of $b_-=(10.1 \pm 1.8\pm 1.4)\%$ for charged and $b_0=(10.9 \pm 0.7\pm 1.1)\%$ for neutral $B$ mesons. This is the first measurement for charged $B$. Assuming equality of the charged and neutral semileptonic widths, the ratio $b_-/b_0=0.93 \pm 0.18 \pm 0.12$ is equivalent to the ratio of lifetimes. A postscript version is available through World-Wide-Web in http://w4.lns.cornell.edu/public/CLNS/1994Comment: 9 pages (in REVTEX format) Preprint CLNS94-1286, CLEO 94-1

Production and Decay of D_1(2420)^0 and D_2^*(2460)^0

We have investigated $D^{+}\pi^{-}$ and $D^{*+}\pi^{-}$ final states and observed the two established $L=1$ charmed mesons, the $D_1(2420)^0$ with mass $2421^{+1+2}_{-2-2}$ MeV/c$^{2}$ and width $20^{+6+3}_{-5-3}$ MeV/c$^{2}$ and the $D_2^*(2460)^0$ with mass $2465 \pm 3 \pm 3$ MeV/c$^{2}$ and width $28^{+8+6}_{-7-6}$ MeV/c$^{2}$. Properties of these final states, including their decay angular distributions and spin-parity assignments, have been studied. We identify these two mesons as the $j_{light}=3/2$ doublet predicted by HQET. We also obtain constraints on {\footnotesize $\Gamma_S/(\Gamma_S + \Gamma_D)$} as a function of the cosine of the relative phase of the two amplitudes in the $D_1(2420)^0$ decay.Comment: 15 pages in REVTEX format. hardcopies with figures can be obtained by sending mail to: [email protected]

Measurement of the branching fraction for Υ(1S)→τ+τ−\Upsilon (1S) \to \tau^+ \tau^-

We have studied the leptonic decay of the $\Upsilon (1S)$ resonance into tau pairs using the CLEO II detector. A clean sample of tau pair events is identified via events containing two charged particles where exactly one of the particles is an identified electron. We find $B(\Upsilon(1S) \to \tau^+ \tau^-) = (2.61~\pm~0.12~{+0.09\atop{-0.13}})$. The result is consistent with expectations from lepton universality.Comment: 9 pages, RevTeX, two Postscript figures available upon request, CLNS 94/1297, CLEO 94-20 (submitted to Physics Letters B

Saliva TwoStep for rapid detection of asymptomatic SARS-CoV-2 carriers

Here, we develop a simple molecular test for SARS-CoV-2 in saliva based on reverse transcription loop-mediated isothermal amplification. The test has two steps: (1) heat saliva with a stabilization solution and (2) detect virus by incubating with a primer/enzyme mix. After incubation, saliva samples containing the SARS-CoV-2 genome turn bright yellow. Because this test is pH dependent, it can react falsely to some naturally acidic saliva samples. We report unique saliva stabilization protocols that rendered 295 healthy saliva samples compatible with the test, producing zero false positives. We also evaluated the test on 278 saliva samples from individuals who were infected with SARS-CoV-2 but had no symptoms at the time of saliva collection, and from 54 matched pairs of saliva and anterior nasal samples from infected individuals. The Saliva TwoStep test described herein identified infections with 94% sensitivity and &gt;99% specificity in individuals with sub-clinical (asymptomatic or pre-symptomatic) infections. &nbsp;</p

Measurement of the Decay Asymmetry Parameters in Λc+→Λπ+\Lambda_c^+ \to \Lambda\pi^+ and Λc+→Σ+π0\Lambda_c^+ \to \Sigma^+\pi^0

We have measured the weak decay asymmetry parameters (\aLC ) for two \LC\ decay modes. Our measurements are \aLC = -0.94^{+0.21+0.12}_{-0.06-0.06} for the decay mode $\Lambda_c^+ \to \Lambda\pi^+$ and \aLC = -0.45\pm 0.31 \pm 0.06 for the decay mode $\Lambda_c \to \Sigma^+\pi^0$. By combining these measurements with the previously measured decay rates, we have extracted the parity-violating and parity-conserving amplitudes. These amplitudes are used to test models of nonleptonic charmed baryon decay.Comment: 11 pages including the figures. Uses REVTEX and psfig macros. Figures as uuencoded postscript. Also available as http://w4.lns.cornell.edu/public/CLNS/1995/CLNS95-1319.p

HPV testing in primary screening of older women

Certain types of the human papilloma virus (HPV) are well established as the primary cause of cervical cancer. Several studies have shown that HPV testing can improve the detection rate of high-grade cervical intraepithelial neoplasia (CIN), but these have been carried out primarily in younger women. In this study we evaluated the role of HPV testing as an adjunct to cytology in women aged 35 or over. An additional aim was to evaluate commercially available kits for HPV testing. A total of 2988 eligible women aged 34 or more attending for a routine smear in 40 general practitioner practices received HPV testing in addition to routine cytology, after having given written informed consent. Samples were assayed by polymerase chain reaction (PCR) and two versions of the Hybrid Capture test for HPV, and women were invited for colposcopy if there was any cytological abnormality (including borderline smears) or the PCR test was positive. Any apparent abnormality was biopsied and loop-excision was performed as necessary. CIN was judged by histology; 42 women had high-grade CIN, of which six were cytology negative (86% sensitivity for borderline or worse) and three had a borderline smear (79% sensitivity for mild dyskaryosis or worse). The positive predictive value of a borderline smear was only 3.1%. Eleven high-grade lesions were negative by the PCR HPV test (sensitivity 74%). The first generation Hybrid Capture II test had a similar sensitivity but an unacceptably high false positive rate (18.3%), while the newer Hybrid Capture II microtitre kit had a 95% sensitivity and a 2.3% positivity rate in normal women when used at a 2 pg ml−1 cut-off (positive predictive value 27%). Cytology performed very well in this older cohort of women. The newer Hybrid Capture II microtitre test may be a useful adjunct, especially if the results reported here are reproducible in other studies. A combined screening test offers the possibility of greater protection and/or longer screening intervals, which could reduce the overall cost of the screening programme. © 1999 Cancer Research Campaig

Enhancement of PLA-PVA surface adhesion in bilayer assemblies by PLA aminolisation

Data Availability: The raw/processed data required to reproduce these findings cannot be shared at this time due to legal or ethical reasons.Poly(lactic acid) (PLA) and poly(vinyl alcohol) (PVA) present complementary barrier properties, and their combination in multilayer assemblies (laminates) could provide materials with more effective barrier capacity for food packaging purposes. However, their low chemical affinity compromises adequate polymer adhesion. Surface free energy modification of thermo-processed PLA films through treatment with 1,6-hexanediamine was used to enhance adhesion with polar PVA aqueous solutions. Treatments of 1 and 3 min increased the polar component of the solid surface tension, while treatments above 10 min provoked a corrosive effect in the films structure. Extensibility analyses of PVA solutions loaded with carvacrol (15 wt.%) and different Tween 85 ratios on PLA-activated surfaces allowed the selection of the 1-min aminolysed surface for obtaining PLA-PVA bilayers, by casting PVA solutions on the PLA films. This study revealed that despite aminolisation enhancing the PLA surface affinity for aqueous PVA solutions, casting-obtained bilayers presented limited oxygen barrier effectiveness due to heterogeneous thickness of PVA layer in the laminates.The authors acknowledge the financial support provided by the Ministerio de Economia y Competitividad (MINECO) of Spain (project AGL2016-76699-R). The author A. Tampau thanks MINECO for the pre-doctoral research grant #BES-2014-068100.info:eu-repo/semantics/publishedVersio