Investigating the roughness effect of biofouling on propeller performance

As a result of the increasing pressure being placed on the marine industry to address ship emissions, regulations to govern the fuel efficiency and efficient operation of ships in the form of the Energy Efficiency Design Index (EEDI) (IMO, 2014) and Energy Efficiency Operation Index (EEOI) (IMO, 2009a) have recently come into force. These have been introduced alongside regulations concerning specific emissions requirements (UNFCCC). Attention has therefore been turned to all aspects of ship design and operation which have impact on their efficiency. In turn, this paper focuses on the effects of biofouling on propeller surfaces highlighting the benefits of reducing biofouling. This subject was the focus of a recently completed EU-Funded FP7 Project entitled FOUL-X-SPEL (2011). This paper investigates the detrimental impacts of biofouling on the performance of a real ship propeller using Computational Fluid Dynamics (CFD) simulations. Initially, the CFD approach used in this study was validated through CFD open-water tests of a propeller. A previously-developed CFD approach for approximating the surface roughness that results from biofouling has then been applied in order to predict the effects on propeller efficiency. The roughness effects of a typical coating and different fouling conditions on the propeller performance were therefore predicted for various advance coefficients Results indicated negative effects of biofouling on the propeller efficiency and the importance of the mitigation of such effects, supporting the importance of informing the industry about the impacts such that they are able to make informed decisions regarding regular propeller maintenance and cleanin

The role of the nature of the noise in the thermal conductance of mechanical systems

Focussing on a paradigmatic small system consisting of two coupled damped oscillators, we survey the role of the L\'evy-It\^o nature of the noise in the thermal conductance. For white noises, we prove that the L\'evy-It\^o composition (Lebesgue measure) of the noise is irrelevant for the thermal conductance of a non-equilibrium linearly coupled chain, which signals the independence between mechanical and thermodynamical properties. On the other hand, for the non-linearly coupled case, the two types of properties mix and the explicit definition of the noise plays a central role.Comment: 9 pages, 2 figures. To be published in Physical Review

HPC and CFD in the marine industry: past, present and future

This paper explores the use of Computational Fluid Dynamics (CFD) applications on High Performance Computing (HPC) platforms from the perspective of a user engaged in Naval Architecture research. The paper will consider the significant limitations which were imposed on research boundaries prior to present HPC capabilities, how this impacted development in the field and the implications for industry. One particular example is the costly experimental testing which, due to resource constraints, is generally restricted to model scale. It will then present an overview of the numerical simulation capabilities using current HPC performance and capability. With the increase of computational power and capacity, CFD simulations are proving to be more accurate and reliable. Being relatively cheaper and more time efficient, numerical methods are becoming the preferred choice within the industry compared to traditional experimental tests. Nevertheless, certain experimental procedures cannot be numerically replicated with the current levels of computational capacity. The future needs and challenges of research and development will be outlined and discussed, highlighting the significant impact exascale computing will have in the field

Conserved mass models with stickiness and chipping

We study a chipping model in one dimensional periodic lattice with continuous mass, where a fixed fraction of the mass is chipped off from a site and distributed randomly among the departure site and its neighbours; the remaining mass sticks to the site. In the asymmetric version, the chipped off mass is distributed among the site and the right neighbour, whereas in the symmetric version the redistribution occurs among the two neighbours. The steady state mass distribution of the model is obtained using a perturbation method for both parallel and random sequential updates. In most cases, this perturbation theory provides a steady state distribution with reasonable accuracy.Comment: 17 pages, 4 eps figure

Evolution of the mosaic structure in InGaN layer grown on a thick GaN template and sapphire substrate

Cataloged from PDF version of article.The InxGa1-xN epitaxial layers, with indium (x) concentration changes between 0.16 and 1.00 (InN), were grown on GaN template/(0001) Al2O3 substrate by metal organic chemical vapour deposition. The indium content (x), lattice parameters and strain values in the InGaN layers were calculated from the reciprocal lattice mapping around symmetric (0002) and asymmetric (10-15) reflection of the GaN and InGaN layers. The characteristics of mosaic structures, such as lateral and vertical coherence lengths, tilt and twist angle and heterogeneous strain and dislocation densities (edge and screw dislocations) of the InGaN epilayers and GaN template layers were investigated by using high-resolution X-ray diffraction (HR-XRD) measurements. With a combination of Williamson-Hall (W-H) measurements and the fitting of twist angles, it was found that the indium content in the InGaN epilayers did not strongly effect the mosaic structures' parameters, lateral and vertical coherence lengths, tilt and twist angle, or heterogeneous strain of the InGaN epilayers

Finite-size scaling for non-linear rheology of fluids confined in a small space

We perform molecular dynamics simulations in order to examine the rheological transition of fluids confined in a small space. By performing finite-size scaling analysis, we demonstrate that this rheological transition results from the competition between the system size and the length scale of cooperative particle motion.Comment: 4pages, 8 figure

Experimental determination of the roughness functions of marine coatings

The aim of this paper is to determine the roughness functions of different marine coatings, including two novel FOUL-X-SPEL paints and two existing commercial coatings, and two control surfaces, using the overall method of Granville (1987). An extensive series of towing tests of flat plates coated with different antifouling coatings was carried out at the Kelvin Hydrodynamics Laboratory (KHL) of the University of Strathclyde. The tests were designed to examine the as applied drag performances of FOUL-X-SPEL paints and compare them with two existing reference paints and two control surfaces. The surface roughness amplitude parameters of all of the test surfaces were measured using a hull roughness analyser. In total over 150 runs were carried out, including a series of repeat tests designed to quantify the uncertainty in the results. The drag coefficients and roughness function values of each surface were evaluated along with the uncertainty limits

Factors Influencing Optical Coherence Tomography Peripapillary Choroidal Thickness: A Multicenter Study.

Purpose:To quantify peripapillary choroidal thickness (PCT) and the factors that influence it in healthy participants who represent the racial and ethnic composition of the U.S. population. Methods:A total of 362 healthy participants underwent optical coherence tomography (OCT) enhanced depth imaging of the optic nerve head with a 24 radial B-scan pattern aligned to the fovea to Bruch's membrane opening axis. Bruch's membrane, anterior scleral canal opening (ASCO), and the anterior scleral surface were manually segmented. PCT was measured at 100, 300, 500, 700, 900, and 1100 μm from the ASCO globally and within 12 clock-hour sectors. The effects of age, axial length, intraocular pressure, ethnicity, sex, sector, and ASCO area on PCT were assessed by ANOVA and univariable and multivariable regressions. Results:Globally, PCT was thicker further from the ASCO border and thinner with older age, longer axial length, larger ASCO area, European descent, and female sex. Among these effectors, age and axial length explained the greatest proportion of variance. The rate of age-related decline increased further from the ASCO border. Sectorally, the inferior-temporal sectors were thinnest (10.7%-20.0% thinner than the thickest sector) and demonstrated a higher rate of age-related loss (from 15.6% to 20.7% faster) at each ASCO distance. Conclusions:In healthy eyes, PCT was thinnest in the inferior temporal sectors and thinner PCT was associated with older age, European descent, longer axial length, larger ASCO area, and female sex. Among these associations, age had the strongest influence, and its effect was greatest within the inferior temporal sectors

On the origin of the Boson peak in globular proteins

We study the Boson Peak phenomenology experimentally observed in globular proteins by means of elastic network models. These models are suitable for an analytic treatment in the framework of Euclidean Random Matrix theory, whose predictions can be numerically tested on real proteins structures. We find that the emergence of the Boson Peak is strictly related to an intrinsic mechanical instability of the protein, in close similarity to what is thought to happen in glasses. The biological implications of this conclusion are also discussed by focusing on a representative case study.Comment: Proceedings of the X International Workshop on Disordered Systems, Molveno (2006

Thin-Film Metamaterials called Sculptured Thin Films

Morphology and performance are conjointed attributes of metamaterials, of which sculptured thin films (STFs) are examples. STFs are assemblies of nanowires that can be fabricated from many different materials, typically via physical vapor deposition onto rotating substrates. The curvilinear--nanowire morphology of STFs is determined by the substrate motions during fabrication. The optical properties, especially, can be tailored by varying the morphology of STFs. In many cases prototype devices have been fabricated for various optical, thermal, chemical, and biological applications.Comment: to be published in Proc. ICTP School on Metamaterials (Augsut 2009, Sibiu, Romania