Dendritic to globular morphology transition in ternary alloy solidification

The evolution of solidification microstructures in ternary metallic alloys is investigated by adaptive finite element simulations of a general multicomponent phase-field model. A morphological transition from dendritic to globular growth is found by varying the alloy composition at a fixed undercooling. The dependence of the growth velocity and of the impurity segregation in the solid phase on the composition is analyzed and indicates a smooth type of transition between the dendritic and globular growth structures.Comment: 4 pages, 2 figure

Radio-frequency Bloch-transistor electrometer

A quantum-limited electrometer based on charge modulation of the Josephson supercurrent in the Bloch transistor inserted into a superconducting ring is proposed. As this ring is inductive coupled to a high-Q resonance tank circuit, the variations of the charge on the transistor island (input signal) are converted into variations of amplitude and phase of radio-frequency oscillations in the tank. These variations are amplified and then detected. The output noise, the back-action fluctuations and their cross-correlation are computed. It is shown that our device enables measurements of the charge with a sensitivity which is determined by the energy resolution of its amplifier, that can be reduced down to the standard quantum limit of \hbar/2. On the basis of this setup a "back-action-evading" scheme of the charge measurements is proposed.Comment: 5 pages incl. 2 figure

Exact relations for quantum-mechanical few-body and many-body problems with short-range interactions in two and three dimensions

We derive relations between various observables for N particles with zero-range or short-range interactions, in continuous space or on a lattice, in two or three dimensions, in an arbitrary external potential. Some of our results generalise known relations between large-momentum behavior of the momentum distribution, short-distance behavior of the pair correlation function and of the one-body density matrix, derivative of the energy with respect to the scattering length or to time, and the norm of the regular part of the wavefunction; in the case of finite-range interactions, the interaction energy is also related to dE/da. The expression relating the energy to a functional of the momentum distribution is also generalised, and is found to break down for Efimov states with zero-range interactions, due to a subleading oscillating tail in the momentum distribution. We also obtain new expressions for the derivative of the energy of a universal state with respect to the effective range, the derivative of the energy of an efimovian state with respect to the three-body parameter, and the second order derivative of the energy with respect to the inverse (or the logarithm in the two-dimensional case) of the scattering length. The latter is negative at fixed entropy. We use exact relations to compute corrections to exactly solvable three-body problems and find agreement with available numerics. For the unitary gas, we compare exact relations to existing fixed-node Monte-Carlo data, and we test, with existing Quantum Monte Carlo results on different finite range models, our prediction that the leading deviation of the critical temperature from its zero range value is linear in the interaction effective range r_e with a model independent numerical coefficient.Comment: 51 pages, 5 figures. Split into three articles: Phys. Rev. A 83, 063614 (2011) [arXiv:1103.5157]; Phys. Rev. A 86, 013626 (2012) [arXiv:1204.3204]; Phys. Rev. A 86, 053633 (2012) [ arXiv:1210.1784

Morphological stability diagram for slowly and rapidly solidifying binary systems

A linear morphological stability of the solid-liquid interface is analyzed for a binary alloy in the limit of low and high crystal growth velocities. Using the result of this analysis, a diagram of morphologies is derived for a whole range of solidification rates with indicating critical growth velocities for the transitions planar front ⇔ cellular/dendritic structure. It is specially noted that the speed of solute diffusion in the bulk liquid limits the absolute chemical stability velocity from the high-rate transition cells/dendrites ⇒ planar front. © 2020, The Author(s)

Piecewise linear transformation in diffusive flux discretization

To ensure the discrete maximum principle or solution positivity in finite volume schemes, diffusive flux is sometimes discretized as a conical combination of finite differences. Such a combination may be impossible to construct along material discontinuities using only cell concentration values. This is often resolved by introducing auxiliary node, edge, or face concentration values that are explicitly interpolated from the surrounding cell concentrations. We propose to discretize the diffusive flux after applying a local piecewise linear coordinate transformation that effectively removes the discontinuities. The resulting scheme does not need any auxiliary concentrations and is therefore remarkably simpler, while being second-order accurate under the assumption that the structure of the domain is locally layered.Comment: 11 pages, 1 figures, preprint submitted to Journal of Computational Physic

Preparation of Neutron-activated Xenon for Liquid Xenon Detector Calibration

We report the preparation of neutron-activated xenon for the calibration of liquid xenon (LXe) detectors. Gamma rays from the decay of xenon metastable states, produced by fast neutron activation, were detected and their activities measured in a LXe scintillation detector. Following a five-day activation of natural xenon gas with a Cf-252 (4 x 10^5 n/s) source, the activities of two gamma ray lines at 164 keV and 236 keV, from Xe-131m and Xe-129m metastable states, were measured at about 95 and 130 Bq/kg, respectively. We also observed three additional lines at 35 keV, 100 keV and 275 keV, which decay away within a few days. No long-lifetime activity was observed after the neutron activation.Comment: to be published in NIM A, corrected typos in Table 1 and Fig.6 of the previous versio

Exceptional Sequences of Line Bundles and Spherical Twists - a Toric Example

Exceptional sequences of line bundles on a smooth projective toric surface are automatically full when they can be constructed via augmentation. By using spherical twists, we give examples that there are also exceptional sequences which can not be constructed this way but are nevertheless full.Comment: 12 pages, 3 figure

Three-body problem for ultracold atoms in quasi-one-dimensional traps

We study the three-body problem for both fermionic and bosonic cold atom gases in a parabolic transverse trap of lengthscale $a_\perp$. For this quasi-one-dimensional (1D) problem, there is a two-body bound state (dimer) for any sign of the 3D scattering length $a$, and a confinement-induced scattering resonance. The fermionic three-body problem is universal and characterized by two atom-dimer scattering lengths, $a_{ad}$ and $b_{ad}$. In the tightly bound `dimer limit', $a_\perp/a\to\infty$, we find $b_{ad}=0$, and $a_{ad}$ is linked to the 3D atom-dimer scattering length. In the weakly bound `BCS limit', $a_\perp/a\to-\infty$, a connection to the Bethe Ansatz is established, which allows for exact results. The full crossover is obtained numerically. The bosonic three-body problem, however, is non-universal: $a_{ad}$ and $b_{ad}$ depend both on $a_\perp/a$ and on a parameter $R^*$ related to the sharpness of the resonance. Scattering solutions are qualitatively similar to fermionic ones. We predict the existence of a single confinement-induced three-body bound state (trimer) for bosons.Comment: 20 pages, 6 figures, accepted for publication in PRA, appendix on the derivation of an integral formula for the Hurvitz zeta functio

Application of Deep Neural Network to Predict the High-Cycle Fatigue Life of AISI 1045 Steel Coated by Industrial Coatings

In this study, deep learning approach was utilized for fatigue behavior prediction, analysis, and optimization of the coated AISI 1045 mild carbon steel with galvanization, hardened chromium, and nickel materials with different thicknesses of 13 and 19 mu m were used for coatings and afterward fatigue behavior of related specimens were achieved via rotating bending fatigue test. Experimental results revealed fatigue life improvement up to 60% after applying galvanization coat on untreated material. Obtained experimental data were used for developing a Deep Neural Network (DNN) modelling and accuracy of more than 99%.was achieved. Predicted results have a fine agreement with experiments. In addition, parametric analysis was carried out for optimization which indicated that coating thickness of 10-15 mu m had the highest effects on fatigue life improvement