Teacher Leaders’ Perceptions of Charter School Principals’ Instructional Leadership Practices

Teacher leaders are a population to consider when observing instructional leadership or the instructional leadership behaviors of the school principal. While teacher leaders may formally or informally fulfill different roles in the school, depending on the school’s needs and the principal’s vision. A voice rarely illuminated within research, teacher leaders should have the ability to perceive and speak to the instructional leadership behaviors of the school principal. It is through the display of the instructional leadership behaviors and implementation of processes and programs that teacher leaders are able to more accurately perceive and communicate beliefs about their school principals’ practices regarding instructional leadership. One overlooked presence in the research on instructional leadership practices is the charter school principal. To address this issue, our goal is to examine the instructional practices of the charter school principal from the lens of Mendel’s five effective leadership practices for instructional leaders as perceived by the teacher leader. Several concepts emerged from this phenomenological study indicating that teacher leaders perceive that effective charter school instructional leaders (a) use diverse communication styles with all stakeholders, (b) promote professional capacity, (c) employ varied data to inform instructional practices and decisions, (d) have a visual and resounding vision statement, and (e) maximize and preserve instructional time for teachers with few daily interruptions

An Accurate Determination of the Exchange Constant in Sr_2CuO_3 from Recent Theoretical Results

Data from susceptibility measurements on Sr_2CuO_3 are compared with recent theoretical predictions for the magnetic susceptibility of the antiferromagnetic spin-1/2 Heisenberg chain. The experimental data fully confirms the theoretical predictions and in turn we establish that Sr_2CuO_3 behaves almost perfectly like a one-dimensional antiferromagnet with an exchange coupling of J = 1700^{+150}_{-100}K.Comment: revised and reformatted paper with new title to appear in Phys. Rev B (Feb.1996). 3 pages (revtex) with 3 embedded figures (macro included). A complete postscript file is available from http://fy.chalmers.se/~eggert/expsusc.ps or by request from [email protected]

Entrepreneurship and Conflict Reduction in the Post-Genocide Rwandan Coffee Industry

Entrepreneurship is widely acknowledged as a catalyst for poverty reduction and economic development. Yet its role in conflict reduction and social development is largely understudied. This paper presents evidence from a field survey conducted among a sample of Rwanda's emerging specialty coffee farmers and workers at coffee washing stations. To the best of our knowledge, this is the first study that quantitatively analyses economic liberalization and conflict reduction in one of Rwanda's most pivotal industries, i.e., coffee, and one of the few studies addressing the link between entrepreneurship in the developing world and intergroup peace-building. We approximated conflict reduction with an attitude of reconciliation between ethnic groups in Rwanda. Results from statistical analyses uncovered significant correlations between economic and livelihood advancement with comparatively more positive attitudes to reconciliation, especially where intergroup contact has increased alongside new incentives for collaboration across group boundaries. This suggests that enhanced entrepreneurship in Rwanda's liberalized coffee industry may provide the context for increased commercial intergroup contact, which in turn may constitute an opportunity for conflict reduction. We conclude with suggestions for follow-up research, to further analyze which types of economic policy changes may also hold the potential to contribute to positive social change

Computer Administered Safety Planning for Individuals at Risk for Suicide: Development and Usability Testing

BACKGROUND: Safety planning is a brief intervention that has become an accepted practice in many clinical settings to help prevent suicide. Even though it is quick compared to other approaches, it frequently requires 20 min or more to complete, which can impede adoption. A self-administered, Web-based safety planning application could potentially reduce clinician time, help promote standardization and quality, and provide enhanced ability to share the created plan. OBJECTIVE: The aim of this study was to design, build, and test the usability of a Web-based, self-administered safety planning application. METHODS: We employed a user-centered software design strategy led by a multidisciplinary team. The application was tested for usability with a target sample of suicidal patients. Detailed observations, structured usability ratings, and Think Aloud procedures were used. Suicidal ideation intensity and perceived ability to cope were assessed pre-post engagement with the Web application. RESULTS: A total of 30 participants were enrolled. Usability ratings were generally strong, and all patients successfully built a safety plan. However, the completeness of the safety plan varied. The mean number of steps completed was 5.5 (SD 0.9) out of 6, with 90% (27/30) of participants completing at least 5 steps and 67% (20/30) completing all 6 steps. Some safety planning steps were viewed as inapplicable to some individuals. Some confusion in instructions led to modifications to improve understandability of each step. Ratings of suicide intensity after completion of the application were significantly lower than preratings, pre: mean 5.11 (SD 2.9) versus post: mean 4.46 (SD 3.0), t27=2.49, P=.02. Ratings of ability to cope with suicidal thoughts after completion of the application were higher than preratings, with the difference approaching statistical significance, pre: mean 5.93 (SD 2.9), post: mean 6.64 (SD 2.4), t27=-2.03, P=.05. CONCLUSIONS: We have taken the first step toward identifying the components needed to maximize usability of a self-administered, Web-based safety planning application. Results support initial consideration of the application as an adjunct to clinical contact. This allows for the clinician or other personnel to provide clarification, when needed, to help the patient build the plan, and to help review and revise the draft

Moisture performance of sealed attics in the mixed-humid climate

Oak Ridge National Laboratory studied 8 homes in the mixed-humid climate, 4 with vented attics and 4 with sealed attics. ORNL wanted to understand the moisture performance of the sealed attic and how it affected the interior environment. We found that the attic and interior of sealed attic homes were more humid than the attic and interior observed in vented attic homes. This is due to the lack of ventilation in the sealed attic. Historically attics have been vented to dehumidify the attic and interior of the home. A sealed attic design greatly reduces the venting potential and thus this drying pathway and can cause elevated interior moisture over a vented attic home. Despite the elevated attic and interior moisture in the sealed attic homes, so far no mold or material degradation has been found. The roof sheathing moisture content has stayed below 20%, indicating low potential for material degradation. Also the relative humidity at the roof sheathing has stayed within the ASHRAE 160 design criteria except for a short time during the 2011/2012 winter. This was due to a combination of the sealed attic design (minimal venting to the outside) and the duct work not being operated in the attic which usually provides a dehumidification pathway. It was also found that when the humidity was controlled using the HVAC system, it resulted in 7% more cooling energy consumption. In the mixed-humid climate this reduces the cost effectiveness of the sealed attic design as a solution for bringing ducts into a semi-conditioned space. Because of this we are recommending the other alternatives be used to bringing ducts into the conditioned space in both new construction and retrofit work in the mixed-humid climate

Patient preferences for emergency department-initiated tobacco interventions: a multicenter cross-sectional study of current smokers

BACKGROUND: The emergency department (ED) visit provides a great opportunity to initiate interventions for smoking cessation. However, little is known about ED patient preferences for receiving smoking cessation interventions or correlates of interest in tobacco counseling. METHODS: ED patients at 10 US medical centers were surveyed about preferences for hypothetical smoking cessation interventions and specific counseling styles. Multivariable linear regression determined correlates of receptivity to bedside counseling. RESULTS: Three hundred seventy-five patients were enrolled; 46% smoked at least one pack of cigarettes per day, and 11% had a smoking-related diagnosis. Most participants (75%) reported interest in at least one intervention. Medications were the most popular (e.g., nicotine replacement therapy, 54%), followed by linkages to hotlines or other outpatient counseling (33-42%), then counseling during the ED visit (33%). Counseling styles rated most favorably involved individualized feedback (54%), avoidance skill-building (53%), and emphasis on autonomy (53%). In univariable analysis, age (r = 0.09), gender (average Likert score = 2.75 for men, 2.42 for women), education (average Likert score = 2.92 for non-high school graduates, 2.44 for high school graduates), and presence of smoking-related symptoms (r = 0.10) were significant at the p \u3c 0.10 level and thus were retained for the final model. In multivariable linear regression, male gender, lower education, and smoking-related symptoms were independent correlates of increased receptivity to ED-based smoking counseling. CONCLUSIONS: In this multicenter study, smokers reported receptivity to ED-initiated interventions. However, there was variability in individual preferences for intervention type and counseling styles. To be effective in reducing smoking among its patients, the ED should offer a range of tobacco intervention options

Campbell Creek Research Homes FY 2012 Annual Performance Report

The Campbell Creek project is funded and managed by the Tennessee Valley Authority (TVA) Technology Innovation, Energy Efficiency, Power Delivery & and Utilization Office. Technical support is provided under contract by the Oak Ridge National Laboratory (ORNL) and the Electric Power Research Institute.The project was designed to determine the relative energy efficiency of typical new home construction, energy efficiency retrofitting of existing homes, and high -performance new homes built from the ground up for energy efficiency. This project will compare three houses that represented the current construction practice as a base case (Builder House CC1); a modified house that could represent a major energy- efficient retrofit (Retrofit House CC2); and a house constructed from the ground up to be a high- performance home (High Performance House CC3). In order tTo enablehave a valid comparison, it was necessary to simulate occupancy in all three houses and heavily monitor the structural components and the energy usage by component. All three houses are two story, slab on grade, framed construction. CC1 and CC2 are approximately 2,400 square feet2. CC3 has a pantry option, that is primarily used as a mechanical equipment room, that adds approximately 100 square feet2. All three houses are all-electric (with the exception of a gas log fireplace that is not used during the testing), and use air-source heat pumps for heating and cooling. The three homes are located in Knoxville in the Campbell Creek Subdivision. CC1 and CC2 are next door to each other and CC3 is across the street and a couple of houses down. The energy data collected will be used to determine the benefits of retrofit packages and high -performance new home packages. There are over 300 channels of continuous energy performance and thermal comfort data collection in the houses (100 for each house). The data will also be used to evaluate the impact of energy -efficient upgrades ton the envelope, mechanical equipment, or demand -response options. Each retrofit will be evaluated incrementally, by both short -term measurements and computer modeling, using a calibrated model. This report is intended to document the comprehensive testing, data analysis, research, and findings within the January 2011 through October 2012 timeframe at the Campbell Creek research houses. The following sections will provide an in-depth assessment of the technology progression in each of the three research houses. A detailed assessment and evaluation of the energy performance of technologies tested will also be provided. Finally, lessons learned and concluding remarks will be highlighted