(Bio)degradable polymeric materials for sustainable future—Part 3: Degradation studies of the PHA/wood flour-based composites and preliminary tests of antimicrobial activity

© 2020 The Authors. Published by MDPI. This is an open access article available under a Creative Commons licence. The published version can be accessed at the following link on the publisher’s website: https://doi.org/10.3390/ma13092200The need for a cost reduction of the materials derived from (bio)degradable polymers forces research development into the formation of biocomposites with cheaper fillers. As additives can be made using the post-consumer wood, generated during wood products processing, re-use of recycled waste materials in the production of biocomposites can be an environmentally friendly way to minimalize and/or utilize the amount of the solid waste. Also, bioactive materials, which possess small amounts of antimicrobial additives belong to a very attractive packaging industry solution. This paper presents a study into the biodegradation, under laboratory composting conditions, of the composites that consist of poly[(R)-3-hydroxybutyrate-co-4-hydroxybutyrate)] and wood flour as a polymer matrix and natural filler, respectively. Thermogravimetric analysis, differential scanning calorimetry and scanning electron microscopy were used to evaluate the degradation progress of the obtained composites with different amounts of wood flour. The degradation products were characterized by multistage electrospray ionization mass spectrometry. Also, preliminary tests of the antimicrobial activity of selected materials with the addition of nisin were performed. The obtained results suggest that the different amount of filler has a significant influence on the degradation profile.Published onlin

Water-Tolerant Trifloaluminate Ionic Liquids: New and Unique Lewis Acidic Catalysts for the Synthesis of Chromane

The first example of triflometallate ionic liquids, named in analogy to chlorometallate ionic liquids, is reported. Trifloaluminate ionic liquids, synthesized from 1-alkyl-3-methylimidazolium triflates and aluminum triflate, were characterized by multinuclear NMR spectroscopy and FT-IR spectroscopy, revealing the existence of oligonuclear, multiply-charged trifloaluminate anions, with multiple bridging triflate modes. Acceptor numbers were determined to quantify their Lewis acidity, rendering trifloaluminate ionic liquids as medium-strength Lewis acids (AN = ca. 65). Used as acidic catalysts in the cycloaddition of 2,4-dimethylphenol and isoprene (molar ratio 2:1) to prepare chromane, trifloaluminate systems outperformed literature systems, showing high activity (conversions 94–99%, selectivities 80–89%) and at low loadings (0.2 mol%) at 35°C. Using these new systems as supported ionic liquid phase (SILP) on multi-walled carbon nanotubes (ionic liquid loading 16 wt%) delivered a recyclable catalytic system, with activity enhanced with respect to the homogenous regime

Comparative Study of Structure-Property Relationships in Polymer Networks Based on Bis-GMA, TEGDMA and Various Urethane-Dimethacrylates

The effect of various dimethacrylates on the structure and properties of homo- and copolymer networks was studied. The 2,2-bis-[4-(2-hydroxy-3- methacryloyloxypropoxy)phenyl]-propane) (Bis-GMA), triethylene glycol dimethacrylate (TEGDMA) and 1,6-bis-(methacryloyloxy-2-ethoxycarbonylamino)-2,4,4-trimethylhexane (HEMA/TMDI), all popular in dentistry, as well as five urethane-dimethacrylate (UDMA) alternatives of HEMA/TMDI were used as monomers. UDMAs were obtained from mono-, di- and tri(ethylene glycol) monomethacrylates and various commercial diisocyanates. The chemical structure, degree of conversion (DC) and scanning electron microscopy (SEM) fracture morphology were related to the mechanical properties of the polymers: flexural strength and modulus, hardness, as well as impact strength. Impact resistance was widely discussed, being lower than expected in the case of poly(UDMA)s. It was caused by the heterogeneous morphology of these polymers and only moderate strength of hydrogen bonds between urethane groups, which was not high enough to withstand high impact energy. Bis-GMA, despite having the highest polymer morphological heterogeneity, ensured fair impact resistance, due to having the strongest hydrogen bonds between hydroxyl groups. The TEGDMA homopolymer, despite being heterogeneous, produced the smoothest morphology, which resulted in the lowest brittleness. The UDMA monomer, having diethylene glycol monomethacrylate wings and the isophorone core, could be the most suitable HEMA/TMDI alternative. Its copolymer with Bis-GMA and TEGDMA had improved DC as well as all the mechanical properties

Influence of Herbal Fillers Addition on Selected Properties of Silicone Subjected to Accelerated Aging

This work aims to assess the impact of the type and percentage of powdered herbs on selected properties of silicone-based composites. The matrix was an addition cross-linked platinum-cured polydimethylsiloxane. The fillers were powdered thyme and sage, which were introduced at 5, 10, and 15 wt.%. The introduced fillers differed in composition, morphology, and grain size. The grain morphology showed differences in the size and shape of the introduced fillers. The qualitative and quantitative assessment resulting from the incorporation was conducted based on tests of selected properties: density, wettability, rebound resilience, hardness, and tensile strength. The incorporation slightly affected the density and wettability of the silicone. Rebound resilience and hardness results differed depending on the filler type and fraction. However, tensile strength decreased, which may be due to the matrix’s distribution of fillers and their chemical composition. Antibacterial activity evaluation against S. aureus proved the bacteriostatic properties of the composites. Accelerated aging in PBS solution further deteriorated the mechanical properties. FTIR and DSC have demonstrated the progressive aging of the materials. In addition, the results showed an overall minimal effect of fillers on the silicone chemical backbone and melting temperature. The developed materials can be used in applications that do not require high mechanical properties

Analysis of immobilized triflogallate (III) IL catalyst - NCN project OPUS, grant no. 2020/37/B/ST8/00693.

<p>Dataset contains results obtained during the NCN project OPUS, grant no. 2020/37/B/ST8/00693. The file presents TGA and SEM-EDX analysis of immobilized triflogallate (III) IL catalyst on silica.</p&gt

Analysis of [Mim][OTf]-TiO2 catalyst - NCN project OPUS, grant no. 2020/37/B/ST8/00693.

<p>Dataset contains results obtained during the NCN project OPUS, grant no. 2020/37/B/ST8/00693. The file presents NMR, TGA, Raman, IR spectra, TEM-EDX analysis of synthesized [Mim][OTf]-TiO2 catalyst.</p&gt

Highly Active Trifloaluminate Ionic Liquids as Recyclable Catalysts for Green Oxidation of 2,3,6-Trimethylphenol to Trimethyl-1,4-Benzoquinone

An effective method for the synthesis of 2,3,6-trimethyl-1,4-benzoquinone via the oxidation of 2,3,6-trimethylphenol as the key step in the in the preparation of vitamin E was presented. An aqueous solution of H2O2 was used as the oxidant and Lewis acidic trifloaluminate ionic liquids [emim][OTf]-Al(OTf)3, χAl(OTf)3 = 0.25 or 0.15 as catalysts. Trifloaluminate ionic liquids were synthesised by the simple reaction between 1-ethyl-3-methylimidazolium trifluoromethanesulfonate (triflate) [emim][OTf] and aluminium triflate used in sub-stoichiometric quantities. The influence of the reaction parameters on the reaction course, such as the amount and concentration of the oxidant, the amount of catalyst, the amount and the type of organic solvent, temperature, and the reaction time was investigated. Finally, 2,3,6-trimethyl-1,4-benzoquinone was obtained in high selectivity (99%) and high 2,3,6-trimethylphenol conversion (84%) at 70 °C after 2 h of oxidation using a 4-fold excess of 60% aqueous H2O2 and acetic acid as the solvent. The catalytic performance of trifloaluminate ionic liquids supported on multiwalled carbon nanotubes (loading of active phase: 9.1 wt.%) was also demonstrated. The heterogeneous ionic liquids not only retained their activity compared to the homogenous counterparts, but also proved to be a highly recyclable catalysts

Chemo-Enzymatic Baeyer–Villiger Oxidation Facilitated with Lipases Immobilized in the Supported Ionic Liquid Phase

A novel method for chemo-enzymatic Baeyer–Villiger oxidation of cyclic ketones in the presence of supported ionic liquid-like phase biocatalyst was designed. In this work, multi-walled carbon nanotubes were applied as a support for ionic liquids which were anchored to nanotubes covalently by amide or imine bonds. Next, lipases B from Candida antarctica, Candida rugosa, or Aspergillus oryzae were immobilized on the prepared materials. The biocatalysts were characterized using various techniques, like thermogravimetry, IR spectroscopy, XPS, elemental analysis, and SEM-EDS microscopy. In the proposed approach, a biocatalyst consisting of a lipase as an active phase allowed the generation of peracid in situ from the corresponding precursor and a green oxidant–hydrogen peroxide. The activity and stability of the obtained biocatalysts in the model oxidation of 2-adamantanone were demonstrated. High conversion of substrate (92%) was achieved under favorable conditions (toluene: n-octanoic acid ratio 1:1 = v:v, 35% aq. H2O2 2 eq., 0.080 g of biocatalyst per 1 mmol of ketone at 20 °C, reaction time 4 h) with four reaction cycles without a drop in its activity. Our ‘properties-by-design’ approach is distinguished by its short reaction time at low temperature and higher thermal stability in comparison with other biocatalysts presented in the literature reports