57 research outputs found
Electrochemical sensing of oxygen gas in ionic liquids on screen printed electrodes
This work aimed to investigate the potentiality of screen-printed electrodes, in room-temperature ionic-liquids (RTILs) electrolytes, for the amperometric sensing of gases. Oxygen was selected as the model gas for these studies. It was found that with proper pre-treatment, these ‘single-use’ electrodes were reusable, their long-term sensing performances were drastically improved, and their robustness was enhanced by polymer-gelification of the RTIL-electrolyte. These studies provide the foundation for future portable sensing application
Achievement of prolonged oxygen detection in room-temperature ionic liquids on mechanically polished platinum screen-printed electrodes
The demonstration of prolonged amperometric detection of oxygen in room-temperature ionic liquids (RTILs) was achieved by the use of mechanical polishing to activate platinum screen-printed electrodes (Pt-SPEs). The RTILs studied were 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][NTf2]) and N-butyl-N-methyl-pyrrolidinium bis(trifluoromethylsulfonyl)imide ([C4mpyrr][NTf2]). It was found that voltammetry on polished Pt-SPEs exhibited less deterioration (in terms of voltammogram shapes, stability of peak currents, and appearance of contaminant peaks) from long-term consecutive cycling under 100% vol oxygen flow in both RTILs. The detection capability of these RTIL/Pt-SPE systems, initially subjected to long-term consecutive voltammetric cycling, was also investigated by cyclic voltammetry (CV) and long-term chronoamperometry (LTCA). Current versus concentration plots were linear on both unpolished and polished electrodes for 10-100% vol O2 (using CV) and 0.1-5% vol O2 (using LTCA). However, sensitivities and limits of detection (LODs) from CV were found to improve significantly on polished electrodes compared to unpolished electrodes, particularly in [C2mim][NTf2], but also moderately in [C4mpyrr][NTf2]. The lowest LODs (of ca. 0.1% vol O2) were found on polished SPEs using LTCA, with the most stable responses observed in [C4mpyrr][NTf2]. Calibration graphs could not be obtained on unpolished electrodes in both RTILs using LTCA. The results show that polishing markedly improves the analytical performances of Pt-SPEs for oxygen sensing in RTILs. The reusability of such disposable Pt-SPEs, after the surfaces had been experimentally fouled, was also demonstrated through the use of polishing. Mechanical polishing of Pt-SPE devices offers a viable approach to performance improvement for amperometric gas sensing. © 2016 American Chemical Society
Pressurizing Field-Effect Transistors of Few-Layer MoS2 in a Diamond Anvil Cell
Hydrostatic pressure applied using diamond anvil cells (DAC) has been widely
explored to modulate physical properties of materials by tuning their lattice
degree of freedom. Independently, electrical field is able to tune the
electronic degree of freedom of functional materials via, for example, the
field-effect transistor (FET) configuration. Combining these two orthogonal
approaches would allow discovery of new physical properties and phases going
beyond the known phase space. Such experiments are, however, technically
challenging and have not been demonstrated. Herein, we report a feasible
strategy to prepare and measure FETs in a DAC by lithographically patterning
the nanodevices onto the diamond culet. Multiple-terminal FETs were fabricated
in the DAC using few-layer MoS2 and BN as the channel semiconductor and
dielectric layer, respectively. It is found that the mobility, conductance,
carrier concentration, and contact conductance of MoS2 can all be significantly
enhanced with pressure. We expect that the approach could enable unprecedented
ways to explore new phases and properties of materials under coupled
mechano-electrostatic modulation.Comment: 15 pages, 5 figure
Recommended from our members
Ion Write Microthermotics: Programing Thermal Metamaterials at the Microscale.
Considerable advances in manipulating heat flow in solids have been made through the innovation of artificial thermal structures such as thermal diodes, camouflages, and cloaks. Such thermal devices can be readily constructed only at the macroscale by mechanically assembling different materials with distinct values of thermal conductivity. Here, we extend these concepts to the microscale by demonstrating a monolithic material structure on which nearly arbitrary microscale thermal metamaterial patterns can be written and programmed. It is based on a single, suspended silicon membrane whose thermal conductivity is locally, continuously, and reversibly engineered over a wide range (between 2 and 65 W/m·K) and with fine spatial resolution (10-100 nm) by focused ion irradiation. Our thermal cloak demonstration shows how ion-write microthermotics can be used as a lithography-free platform to create thermal metamaterials that control heat flow at the microscale
Pressure-Temperature Phase Diagram of Vanadium Dioxide
The complexity of strongly correlated electron physics in vanadium dioxide is
exemplified as its rich phase diagrams of all kinds, which in turn shed light
on the mechanisms behind its various phase transitions. In this work, we map
out the hydrostatic pressure - temperature phase diagram of vanadium dioxide
nanobeams by independently varying pressure and temperature with a diamond
anvil cell. In addition to the well-known insulating M1 (monoclinic) and
metallic R (tetragonal) phases, the diagram identifies the existence at high
pressures of the insulating M1' (monoclinic, more conductive than M1) phase,
and two metallic phases of X (monoclinic) and O (orthorhombic, at high
temperature only). Systematic optical and electrical measurements combined with
density functional calculations allow us to delineate their phase boundaries as
well as reveal some basic features of the transitions.Comment: 9 pages, 4 figure
Clinical Characteristics of 26 Human Cases of Highly Pathogenic Avian Influenza A (H5N1) Virus Infection in China
BACKGROUND: While human cases of highly pathogenic avian influenza A (H5N1) virus infection continue to increase globally, available clinical data on H5N1 cases are limited. We conducted a retrospective study of 26 confirmed human H5N1 cases identified through surveillance in China from October 2005 through April 2008. METHODOLOGY/PRINCIPAL FINDINGS: Data were collected from hospital medical records of H5N1 cases and analyzed. The median age was 29 years (range 6-62) and 58% were female. Many H5N1 cases reported fever (92%) and cough (58%) at illness onset, and had lower respiratory findings of tachypnea and dyspnea at admission. All cases progressed rapidly to bilateral pneumonia. Clinical complications included acute respiratory distress syndrome (ARDS, 81%), cardiac failure (50%), elevated aminotransaminases (43%), and renal dysfunction (17%). Fatal cases had a lower median nadir platelet count (64.5 x 10(9) cells/L vs 93.0 x 10(9) cells/L, p = 0.02), higher median peak lactic dehydrogenase (LDH) level (1982.5 U/L vs 1230.0 U/L, p = 0.001), higher percentage of ARDS (94% [n = 16] vs 56% [n = 5], p = 0.034) and more frequent cardiac failure (71% [n = 12] vs 11% [n = 1], p = 0.011) than nonfatal cases. A higher proportion of patients who received antiviral drugs survived compared to untreated (67% [8/12] vs 7% [1/14], p = 0.003). CONCLUSIONS/SIGNIFICANCE: The clinical course of Chinese H5N1 cases is characterized by fever and cough initially, with rapid progression to lower respiratory disease. Decreased platelet count, elevated LDH level, ARDS and cardiac failure were associated with fatal outcomes. Clinical management of H5N1 cases should be standardized in China to include early antiviral treatment for suspected H5N1 cases
Ionophore-Assisted Electrochemistry of Neutral Molecules: Oxidation of Hydrogen in an Ionic Liquid Electrolyte
The electrochemical properties of gas molecules are of great interest for both fundamental and applied research. In this study, we introduce a novel concept to systematically alter the electrochemical behavior and, in particular, the redox potential of neutral gas molecules. The concept is based on the use of an ion-binding agent, or ‘ionophore’, to bind and stabilize the ionic electrochemical reaction product. We demonstrate that the ionophore-assisted electrochemical oxidation of hydrogen in a room temperature ionic liquid electrolyte is shifted by almost 1 V towards more negative potentials in comparison to an ionophore-free electrolyte. The altered electrochemical response in the presence of the ionophore not only yields insights into the reaction mechanism but can be used also to determine the diffusion coefficient of the ionophore species. This ionophore-modulated electrochemistry of neutral gas molecules opens up new avenues for the development of highly selective electrochemical sensors.</p
Enhancing the Thermoelectric Power Factor with Highly Mismatched Isoelectronic Doping
We investigate the effect of O impurities on the thermoelectric properties of ZnSe from a combination
of first-principles and analytic calculations. It is demonstrated that dilute amounts of O impurities
introduce peaks in the density of states (DOS) above the conduction band minimum, and that the charge
density near the DOS peaks is substantially attracted toward O atoms due to their high electronegativity.
The impurity-induced peaks in the DOS result in a sharp increase of the room-temperature Seebeck
coefficient and power factor from those of O-free ZnSe by a factor of 30 and 180, respectively.
Furthermore, this effect is found to be absent when the impurity electronegativity well matches the
host that it substitutes. The results suggest that highly electronegativity-mismatched alloys can be
designed for high performance thermoelectric applications.National Science FoundationNetwork for Computational Nanotechnology (Grant No. EEC-0634750)TeragridNational Energy Research Scientific Computing CenterLawrence Berkeley National Laboratory (Department of Energy Contract No. DE-AC02- 05CH1123
Screen-Printed Graphite Electrodes as Low-Cost Devices for Oxygen Gas Detection in Room-Temperature Ionic Liquids
Screen-printed graphite electrodes (SPGEs) have been used for the first time as platforms to detect oxygen gas in room-temperature ionic liquids (RTILs). Up until now, carbon-based SPEs have shown inferior behaviour compared to platinum and gold SPEs for gas sensing with RTIL solvents. The electrochemical reduction of oxygen (O2) in a range of RTILs has therefore been explored on home-made SPGEs, and is compared to the behaviour on commercially-available carbon SPEs (C-SPEs). Six common RTILs are initially employed for O2 detection using cyclic voltammetry (CV), and two RTILs ([C2mim][NTf2] and [C4mim][PF6]) chosen for further detailed analytical studies. Long-term chronoamperometry (LTCA) was also performed to test the ability of the sensor surface for real-time gas monitoring. Both CV and LTCA gave linear calibration graphs—for CV in the 10–100% vol. range, and for LTCA in the 0.1–20% vol. range—on the SPGE. The responses on the SPGE were far superior to the commercial C-SPEs; more instability in the electrochemical responses were observed on the C-SPEs, together with some breaking-up or dissolution of the electrode surface materials. This study highlights that not all screen-printed ink formulations are compatible with RTIL solvents for longer-term electrochemical experiments, and that the choice of RTIL is also important. Overall, the low-cost SPGEs appear to be promising platforms for the detection of O2, particularly in [C4mim][PF6]
- …