Estimation of genetic parameters for pork belly traits

Objective Pork belly is a cut of meat with high worldwide demand. However, although the belly is comprised of multiple muscles and fat, unlike the loin muscle, research on their genetic parameters has yet to focus on a representative cut. To use swine breeding, it is necessary to estimate heritability against pork belly traits. Moreover, estimating genetic correlations is needed to identify genetic relationship among the traditional carcass and meat quality traits. This study sought to estimate the heritability of the carcass, belly, and their component traits, as well as the genetic correlations among them, to confirm whether these traits can be improved. Methods A total of 543 Yorkshire pigs (406 castrated males and 137 females) from 49 sires and 244 dam were used in this study. To estimate genetic parameters, a total of 12 traits such as lean meat production ability, meat quality and pork belly traits were chosen. The heritabilities were estimated by using genome-wide efficient mixed model association software. The statistical model was selected so that farm, carcass weight, sex, and slaughter season were fixed effects. In addition, its genetic parameters were calculated via MTG2 software. Results The heritability estimates for the 7th belly slice along the whole plate and its components were low to moderate (0.07±0.07 to 0.33±0.07). Moreover, the genetic correlations among the carcass and belly traits were moderate to high (0.28±0.20 to 0.99±0.31). Particularly, the rectus abdominis muscle exhibited a high absolute genetic correlation with the belly and meat quality (0.73±52 to 0.93±0.43). Conclusion A moderate to high correlation coefficient was obtained based on the genetic parameters. The belly could be genetically improved to contain a larger proportion of muscle regardless of lean meat production ability

Lower facial contouring surgery using a novel method: M-genioplasty

Background Mandibular contouring surgery to produce a more slender and small face has become popular, especially in East Asia. Narrowing genioplasty should be simultaneously performed with mandibular angle resection to achieve satisfactory results. In Korea, T-genioplasty has been frequently performed for chin narrowing. The authors developed a new, safe, and reliable method, termed M-genioplasty, that can provide a more slender and attractive lower face. Methods From June 2013 to December 2017, 36 patients underwent M-genioplasty with mandibular angle resection for lower facial contouring. Horizontal and vertical osteotomies were performed obliquely. The resected bone segments were wedge-shaped. The remaining two bone segments were rotated and approximated centrally. The lateral mandible bony stepoff was trimmed off for mandibular angle resection. Results In all patients, the facial contour sufficiently improved, and most patients were satisfied with the outcome. No severe complications took place during postoperative follow-up. Conclusions M-genioplasty can provide more mandibular angle resection and can create a more acute chin angle without bone resorption than other methods, including T-genioplasty. M-genioplasty with mandibular angle resection is a safer, more accurate, and more reliable method for lower facial contouring

Efficacy and safety of rapid intermittent correction compared with slow continuous correction with hypertonic saline in patients with moderately severe or severe symptomatic hyponatremia: study protocol for a randomized controlled trial (SALSA trial)

Abstract Background Hyponatremia is the most common electrolyte imbalance encountered in clinical practice, associated with increased mortality and length of hospital stay. However, no high-quality evidence regarding whether hypertonic saline is best administered as a continuous infusion or a bolus injection has been found to date. Therefore, in the current study, we will evaluate the efficacy and safety of rapid intermittent correction compared with slow continuous correction with hypertonic saline in patients with moderately severe or severe symptomatic hyponatremia. Methods/design This is a prospective, investigator-initiated, multicenter, open-label, randomized controlled study with two experimental therapy groups. A total of 178 patients with severe symptomatic hyponatremia will be enrolled and randomly assigned to receive either rapid intermittent bolus or slow continuous infusion management with hypertonic saline. The primary outcome is the incidence of overcorrection at any given period over 2 days. The secondary outcomes will include the efficacy and safety of two other approaches to the treatment of hyponatremia with 3% hypertonic saline. Discussion This is the first clinical trial to investigate the efficacy and safety of rapid intermittent correction compared with slow continuous correction with hypertonic saline in patients with moderately severe or severe hyponatremia. Trial registration ClinicalTrials.gov, identifier number: NCT02887469 . Registered on 1 August 2016

Preparation and evaluation of solid-self-emulsifying drug delivery system containing paclitaxel for lymphatic delivery

Solid-self-emulsifying drug delivery system (S-SEDDS) of paclitaxel (Ptx) was developed by the spray drying method with the purpose of improving the low bioavailability (BA) of Ptx. 10% oil (ethyl oleate), 80% surfactant mixture (Tween 80: Carbitol, 90: 10, w/w), and 10% cosolvent (PEG 400) were chosen according to their solubilizing capacity. The mean droplet size, zeta potential, and encapsulation efficiency of the prepared S-SEDDS were 16.9 ± 1.53 nm, 12.5 ± 1.66 mV, and 56.2 ± 8.1%, respectively. In the S-SEDDS, Ptx presents in the form of molecular dispersion in the emulsions or is distributed in an amorphous state or crystalline with very small size. The prepared S-SEDDS formulation showed 70 and 75% dissolution in 60 and 30 min in dissolution medium pH 1.2 and 6.8, respectively. Significant increase (P ≤ 0.05) in the peak concentration (C m a x), the area under the curve (A U C 0 - ∞), and the lymphatic targeting efficiency of Ptx was observed after the oral administration of the Ptx-loaded S-SEDDS to rats (20 mg/kg as Ptx). Our research suggests the prepared Ptx-loaded S-SEDDS can be a good candidate for the enhancement of BA and targeting drug delivery to the lymphatic system of Ptx

Proximal Subungual Onychomycosis in a Patient with Classic Kaposi Sarcoma Caused by Trichophyton rubrum

A 58-year-old man presented with whitish patches on both great toenails for four weeks prior to visiting our hospital; the patches spread rapidly to other finger- and toe-nails. Prior to presentation, the patient had been diagnosed with idiopathic thrombocytopenic purpura two months ago and Kaposi's sarcoma three weeks ago. The patient was treated with human immunoglobulin for five days, and then received prednisolone 40 mg bid. Serology showed that the patient was negative for HIV and results of other laboratory tests were normal. The KOH slide preparation of the nail scraping showed long septated hyphae and numerous arthrospores. The fungus culture revealed whitish downy colonies on the front side and wine-red reverse pigmentation on Sabouraud's dextrose agar. Trichophyton rubrum was isolated on fungus culture and slide culture. The internal transcribed space (ITS) regions of ribosomal DNA of the cultured fungus were identical to Trichophyton rubrum. Proximal subungual onychomycosis (PSO) is the rarest form of onychomycosis. PSO initially presents as whitish patch(es) on the proximal side of the nail plate(s). Because PSO shows whitish to yellowish patches on the nail plate, the result of KOH examination of nail scrapings from the nail plate is almost always negative. Herein, we report on a case of multiple PSO in a patient with classic Kaposi sarcoma and suggest a method for easy KOH scraping on PSO

Activation of PERK Signaling Attenuates Aβ-Mediated ER Stress

Alzheimer's disease (AD) is characterized by the deposition of aggregated beta-amyloid (Aβ), which triggers a cellular stress response called the unfolded protein response (UPR). The UPR signaling pathway is a cellular defense system for dealing with the accumulation of misfolded proteins but switches to apoptosis when endoplasmic reticulum (ER) stress is prolonged. ER stress is involved in neurodegenerative diseases including AD, but the molecular mechanisms of ER stress-mediated Aβ neurotoxicity still remain unknown. Here, we show that treatment of Aβ triggers the UPR in the SK-N-SH human neuroblastoma cells. Aβ mediated UPR pathway accompanies the activation of protective pathways such as Grp78/Bip and PERK-eIF2α pathway, as well as the apoptotic pathways of the UPR such as CHOP and caspase-4. Knockdown of PERK enhances Aβ neurotoxicity through reducing the activation of eIF2α and Grp8/Bip in neurons. Salubrinal, an activator of the eIF2α pathway, significantly increased the Grp78/Bip ER chaperone resulted in attenuating caspase-4 dependent apoptosis in Aβ treated neurons. These results indicate that PERK-eIF2α pathway is a potential target for therapeutic applications in neurodegenerative diseases including AD

Pulsed Radiofrequency Lesioning of the Axillary and Suprascapular Nerve in Calcific Tendinitis

The patient was a 45-year-female who presented with pain at right shoulder and right upper arm. The patient suffered from right shoulder and arm pain for 3 years and had pain management which was performed using medication and conservative management after she had been diagnosed with calcific tendinitis. However, substantial pain relief was not consistently achieved, and recurrence of pain was reported. Therefore, we performed right axillary nerve and suprascapular nerve block through pulsed radiofrequency. Two months after the procedure, the shoulder pain gradually subsided with the size reduction of the calcified nodule and she needed no more pain management

An Apparatus for Performing Microtensile Tests at Elevated Temperatures inside a Scanning Electron Microscope

In this paper, we introduce an apparatus to perform microtensile tests at elevated temperatures inside a scanning electron microscope. The apparatus has a stroke of 250 μm with a displacement resolution of 10 nm and a load resolution of 9.7 μN. Measurements at elevated temperatures are performed through use of two silicon-based micromachined heaters that support the sample. Each heater consists of a tungsten heating element that also serves as a temperature gauge. To demonstrate the testing capabilities, tensile tests were performed on submicron Cu films at various temperatures up to 430 °C. Stress–strain curves show a significant decrease in yield strength and initial slope for the samples tested at elevated temperature, which we attribute to diffusion-facilitated grain boundary sliding and dislocation climb.Engineering and Applied Science