11,317 research outputs found
CHARTS FOR EQUILIBRIUM FLOW PROPERTIES OF AIR IN HYPERVELOCITY NOZZLES
Charts for equilibrium flow properties of air in hypervelocity nozzle
On The Linearity of The Black Hole - Bulge Mass Relation in Active and in Nearby Galaxies
Analysis of PG quasar observations suggests a nonlinear relation between the
black hole mass, M_BH, and the bulge mass, M_bulge, although a linear relation,
as proposed for nearby galaxies, cannot be ruled out. New M_BH values for
nearby galaxies from Gebhardt et al., and L_bulge measurements for Seyfert 1
galaxies from Virani et al., are used here to obtain a more accurate value for
the slope of the M_BH-M_bulge relation. The combined sample of 40 active and
non-active galaxies suggests a significantly nonlinear relation, M_BH\propto
M_bulge^{1.53\pm 0.14}. Further support for a nonlinear relation is provided by
the slope of the M_BH-stellar velocity dispersion relation found recently, and
by the low M_BH found in late type spiral galaxies. The mean M_BH/M_bulge ratio
is therefore not a universal constant, but rather drops from ~0.5% in bright
(M_V ~ -22) ellipticals, to ~0.05% in low luminosity (M_V ~ -18) bulges. Hubble
Space Telescope determinations of M_BH in late type spirals, and of the bulge
magnitude in narrow line Seyfert 1 galaxies (both predicted to have low M_BH),
can further test the validity of the nonlinear M_BH-M_bulge relation.Comment: Accepted for publication in ApJ, 9 pages inc. 2 figure
A spiral-like disk of ionized gas in IC 1459: Signature of a merging collision
The authors report the discovery of a large (15 kpc diameter) H alpha + (NII) emission-line disk in the elliptical galaxy IC 1459, showing weak spiral structure. The line flux peaks strongly at the nucleus and is more concentrated than the stellar continuum. The major axis of the disk of ionized gas coincides with that of the stellar body of the galaxy. The mass of the ionized gas is estimated to be approx. 1 times 10 (exp 5) solar mass, less than 1 percent of the total mass of gas present in IC 1459. The total gas mass of 4 times 10(exp 7) solar mass has been estimated from the dust mass derived from a broad-band color index image and the Infrared Astronomy Satellite (IRAS) data. The authors speculate that the presence of dust and gas in IC 1459 is a signature of a merger event
Asymptotic Behavior of Ext functors for modules of finite complete intersection dimension
Let be a local ring, and let and be finitely generated
-modules such that has finite complete intersection dimension. In this
paper we define and study, under certain conditions, a pairing using the
modules \Ext_R^i(M,N) which generalizes Buchweitz's notion of the Herbrand
diference. We exploit this pairing to examine the number of consecutive
vanishing of \Ext_R^i(M,N) needed to ensure that \Ext_R^i(M,N)=0 for all
. Our results recover and improve on most of the known bounds in the
literature, especially when has dimension at most two
ISO far-infrared observations of rich galaxy clusters II. Sersic 159-03
The far-infrared emission from rich galaxy clusters is investigated. Maps
have been obtained by ISO at 60, 100, 135, and 200 microns using the PHT-C
camera. Ground based imaging and spectroscopy were also acquired. Here we
present the results for the cooling flow cluster Sersic 159-03. An infrared
source coincident with the dominant cD galaxy is found. Some off-center sources
are also present, but without any obvious counterparts.Comment: 6 pages, 4 postscript figures, accepted for publication in `Astronomy
and Astrophysics
An extension of Wiener integration with the use of operator theory
With the use of tensor product of Hilbert space, and a diagonalization
procedure from operator theory, we derive an approximation formula for a
general class of stochastic integrals. Further we establish a generalized
Fourier expansion for these stochastic integrals. In our extension, we
circumvent some of the limitations of the more widely used stochastic integral
due to Wiener and Ito, i.e., stochastic integration with respect to Brownian
motion. Finally we discuss the connection between the two approaches, as well
as a priori estimates and applications.Comment: 13 page
Discovery of a New Quadruple Lens HST 1411+5211
Gravitational lensing is an important tool for probing the mass distribution
of galaxies. In this letter we report the discovery of a new quadruple lens HST
1411+5211 found in archived WFPC2 images of the galaxy cluster CL140933+5226.
If the galaxy is a cluster member then its redshift is . The images of
the source appear unresolved in the WFC implying that the source is a quasar.
We have modeled the lens as both a single galaxy and a galaxy plus a cluster.
The latter model yields excellent fits to the image positions along with
reasonable parameters for the galaxy and cluster making HST 1411+5211 a likely
gravitational lens. Determination of the source redshift and confirmation of
the lens redshift would allow us to put strong constraints on the mass
distribution of the lensing galaxy.Comment: 11 pages including 1 postscript figure, aastex. Accepted to the ApJL.
Also available from:
http://www.astro.lsa.umich.edu:80/users/philf/www/papers/list.htm
Experimental aerodynamic characteristics for a cylindrical body of revolution with side strakes and various noses at angles of attack from 0 degrees to 58 degrees and Mach numbers from 0.6 to 2.0
For a body of revolution with afterbody side strakes, an experimental investigation was conducted in the Ames 6- by 6-Foot Wind Tunnel to determine the effects on the aerodynamic characteristics of forebody geometry, nose strakes, body side strakes, Reynolds number, Mach number, and angle of attack. Aerodynamic force and moment characteristics were measured for the straked cylindrical afterbody (cylinder fineness ratio of 7) with tangent ogive noses of fineness ratio 2.5 to 5.0. In addition, the straked cylinder afterbody was tested with an ogive nose having a rounded tip and an ogive nose with two different nose strake arrangements. The data demonstrate that the aerodynamic characteristics for a body of revolution with side strakes can be significantly affected by changes in nose fineness ratio, nose bluntness, Reynolds number, Mach number, and, of course, angle of attack. Removing the strakes from the cylindrical aftersection greatly decreased the lift, but this removal hardly changed the maximum magnitudes of the undesirable side forces that developed at angles of attack greater than about 25 deg for subsonic Mach numbers
Experimental aerodynamic characteristics for slender bodies with thin wings and tail at angles of attack from 0 deg to 58 deg and Mach numbers from 0.6 to 2.0
An experimental investigation was conducted by wind tunnel to measure the static aerodynamic characteristics for bodies of circular and elliptic cross section with various thin flat plate wings and a thin tail consisting of horizontal and vertical parts. The wings had aspect ratios of 4 and taper ratios of about 0, 0.25, and 0.5. Two additional wings, which had taper ratios near 0.25 and aspect ratios of about 3 and 5, were also tested in combination with the bodies and tail. All wings had about the same planform area. The exposed area of the horizontal portion of the tail was about 33 to 36 percent of the exposed area of the wings. The exposed area of the vertical tail fin was about 22 to 24 percent of the exposed area of the wings. The elliptic body, with an a/b = 2 cross section, had the same length and axial distribution of cross sectional area as the circular body. The circular body had a cylindrical aftersection of fineness ratio 7, and it was tested with the wings and tail in combination with tangent ogive noses that had fineness ratios of 2.5, 3.0, 3.5, and 5.0. In addition, an ogive nose with a rounded tip and an ogive nose with two different nose strake arrangements were used. Nineteen configuration combinations were tested at Mach numbers of 0.6, 0.9, 1.5, and 2.0 at angles of attack from 0 to 58 deg. The Reynolds numbers, based on body base diameter, were about 4.3 X 100,000
Experimental aerodynamics characteristics for bodies of elliptic cross section at angles of attack from 0 deg to 58 deg and Mach numbers from 0.6 to 2.0
An experimental investigation was conducted to measure the static aerodynamic characteristics for two bodies of elliptic cross section and for their equivalent body of revolution. The equivalent body of revolution had the same length and axial distribution of cross-sectional area as the elliptic bodies. It consisted of a tangent ogive nose of fineness ratio 3 followed by a cylinder with a fineness ratio of 7. All bodies were tested at Mach numbers of 0.6, 0.9, 1.2, 1.5, and 2.0 at angles of attack from 0 deg to 58 deg. The data demonstrate that the aerodynamic characteristics can be significantly altered by changing the body cross section from circular to elliptic and by rolling the body from 0 deg to 90 deg. For example, the first elliptic body (with a constant cross-sectional axis ratio of 2) developed at zero roll about twice the normal force developed by the equivalent body of revolution. At some angles of attack greater than about 25 deg, side forces and yawing moments were measured in spite of the fact that the bodies were tested at zero angle of sideslip. The side-force and yawing-moment coefficients decreased with an increase in Mach number and essentially disappeared for all the bodies at Mach numbers greater than 1.2. From the standpoint of reducing undesirable side forces at high angles of attack, it is best to have the flattest side of the nose of the elliptic bodies pitching against the stream crossflow. The effect of Reynolds number was also the least significant for both elliptic bodies when the flattest side of the nose was pitched against the stream crossflow
- …