54 research outputs found
Modelización de la transición vítrea con relajación entálpica a partir de datos térmicos
[Resumen] El objetivo de este trabajo es modelizar la curva de flujo de calor total que se obtiene a
partir de ensayos de calorimetría diferencial de barrido (DSC) estándar en el rango de
temperaturas de la transición vítrea y la recuperación entálpica. Para ello se propone un
modelo matemático que permite la estimación de las curvas de flujo de calor reversing y
nonreversing (se utiliza la denominación inglesa para evitar la confusión con procesos
termodinámicamente reversibles o irreversibles) a partir de la curva de flujo de calor total
obtenida en un ensayo de calorimetría diferencial de barrido. El modelo se ajusta de forma
óptima a la curva de flujo de calor total mediante técnicas de regresión no lineal.
Análogamente al MTDSC, el modelo propuesto permite separar los procesos reversing y
nonreversing, pero con la diferencia importante de que al trabajar con datos de flujo de
calor total, las señales separadas no se verán afectadas por la frecuencia de modulación.
Teniendo en cuenta estas diferencias, la separación obtenida con el modelo se compara con
la obtenida mediante MTDSC y se obtiene una estimación del efecto de la frecuencia. La
posibilidad de aplicar este modelo resulta de especial interés en el estudio del
envejecimiento físico de materiales amorfos o parcialmente amorfos, los cuales al ser
almacenados a temperaturas inferiores a su temperatura de transición vítrea, evolucionan
espontáneamente hacia un estado de equilibrio experimentando lo que se conoce como
relajación entálpica. En esas situaciones, el estudio de la transición vítrea mediante DSC
estándar es muy complicado, a no ser que se borre previamente la historia térmica, lo cual
alteraría el material. Conviene destacar que la importancia del modelo no radica en poder
obtener mediante DSC estándar algo similar a lo que se obtiene mediante MTDSC, sino en
que la estimación de la temperatura de transición vítrea obtenida está libre, a diferencia del
caso MTDSC, del efecto de la frecuencia.[Resumo] O obxectivo deste traballo é modelizar a curva de fluxo de calor total que se obtén a partir
de ensaios de calorimetría diferencial de varrido (DSC) estándar no rango de temperaturas
da transición vítrea e a recuperación entálpica. Para iso proponse un modelo matemático
que permite a estimación das curvas de fluxo de calor reversing e non-reversing (utilízase a
denominación inglesa para evitar a confusión con procesos termodinámicamente
reversibles ou irreversibles) a partir da curva de fluxo de calor total obtida nun ensaio de
calorimetría diferencial de varrido. O modelo axústase de forma óptima á curva de fluxo de
calor total mediante técnicas de regresión non lineal. Analogamente ao MTDSC, o modelo
proposto permite separar os procesos reversing e non-reversing, pero coa diferenza
importante de que ao traballar con datos de fluxo de calor total, os sinais separados non se
verán afectadas pola frecuencia de modulación. Tendo en conta estas diferenzas, a
separación obtida co modelo compárase coa obtida mediante MTDSC e obtense unha
estimación do efecto da frecuencia. A posibilidade de aplicar este modelo resulta de
especial interese no estudo do avellentamento físico de materiais amorfos ou parcialmente
amorfos, os cales ao ser almacenados a temperaturas inferiores á súa temperatura de
transición vítrea, evolucionan espontáneamente cara a un estado de equilibrio
experimentando o que se coñece como relaxación entálpica. Nesas situacións, o estudo da
transisción vítrea mediante DSC estándar é moi complicado, a non ser que se borre
previamente a historia térmica, o cal alteraría o material. Convén destacar que a
importancia do modelo non radica en poder obter mediante DSC estándar algo similar ao
que se obtén mediante MTDSC, senón en que a estimación da temperatura de transición
vítrea obtida está libre, a diferenza do caso MTDSC, do efecto da frecuencia.[Abstract] The aim of this work is to model the total heat flow curve obtained by standard differential
scanning calorimetry (DSC) in the glass transition-enthalpy recovery range of temperature.
To this aim, a mathematical model is proposed, which allows to estimate the reversing and
non-reversing curves from the total heat flow curve obtained in a standard DSC test. The
model is optimally fitted to the total heat flow curve by non linear regression techniques.
Similarly to modulated temperature-DSC (MTDSC), the model allows for separation of the
reversing and non-reversing processes, but with the important difference consisting in that,
since only total heat flow data are involved in the calculation, the separated signals will not
be affected by the modulation frequency. Taking these differences into account, the
separation obtained by the model is compared to the one obtained by MTDSC, and an
estimation of the frequency effect is also obtained. The possibility of applying this model is
of great interest for the study of the physical aging of noncrystalline or partially
noncrystalline materials, which when stored at temperatures below its glass transition
temperature, evolve spontaneously toward a state of equilibrium, experiencing what is
known as enthalpy relaxation. In those situations, the study of the glass transition by
standard DSC is very complicated, unless the thermal history is previously erased, which
would alter the material itself. It should be mentioned that the importance of the proposed
model does not lie on the possibility of obtaining by standard DSC something similar to
what is obtained by MTDSC, but on the fact that the obtained estimation of the glass
transition temperature is free, differently than in the MTDSC case, from the frequency
effect
Crystallization kinetics of a commercial poly(lactic acid) based on characteristic crystallization time and optimal crystallization temperature
This version of the article has been accepted for publication, after peer review and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1007/s10973-020-10081-7[Abstract]: A model is proposed to fit differential scanning calorimetry (DSC) isothermal crystallization curves obtained from the molten state at different temperatures. A commercial 3D printing polylactic acid (PLA) sample is used to test the method. All DSC curves are fitted by a mixture of two simultaneous functions, one of them being a time derivative generalized logistic accounting for the exothermic effect and the other, a generalized logistic, accounting for the baseline. There is a rate parameter, which is allowed to vary across different temperatures. The rate parameter values obtained at different temperatures were jointly explained as a result of three crystallization processes, each one defined by a characteristic crystallization time, a characteristic temperature, and a dispersion or width factor. Apart from the very good fittings obtained at all temperatures, the results agree with the existence of a few crystal forms of PLA, which were demonstrated by other authors. Thus, the main significance of this work consists in providing a new approach in order to mathematically describe the isothermal crystallization kinetics of a polymer from the melt. Such a kinetic description is needed in order to predict the extent of a crystallization process as a
function of time at any isothermal temperature. The approach used here allows to understand the overall crystallization of the PLA used in this work as the sum
of three crystallization processes, each of them corresponding to a different crystal form. Each experimental crystallization exotherm, which may include more than one crystal form, can be reproduced by a generalized logistic function. The overall rate factor at a given temperature is the weighted sum of the rate factors of the different crystal structures at that temperature. The rate factor of each of these three processes is described by a Gaussian function whose parameters are a crystallization time, a characteristic temperature and a temperature dispersion factor. Therefore, the crystallization rate for each crystal form
can be interpreted as a relative likelihood to crystallize at a given temperature. On the other hand, the characteristic crystallization time parameter refers to the time needed for a given crystal structure to be formed at the temperature at which the relative likelihood to crystallize of that form is highestThis research has been supported by the Spanish Ministry of Science and Innovation, MINECO Grant MTM2017–82724-
Discovery of Colossal Breathing-Caloric Effect under Low Applied Pressure in the Hybrid Organic–Inorganic MIL-53(Al) Material
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG[Abstract] In this work, “breathing-caloric” effect is introduced as a new term to define very large thermal changes that arise from the combination of structural changes and gas adsorption processes occurring during breathing transitions. In regard to cooling and heating applications, this innovative caloric effect appears under very low working pressures and in a wide operating temperature range. This phenomenon, whose origin is analyzed in depth, is observed and reported here for the first time in the porous hybrid organic–inorganic MIL-53(Al) material. This MOF compound exhibits colossal thermal changes of ΔS ∼ 311 J K–1 kg–1 and ΔH ∼ 93 kJ kg–1 at room temperature (298 K) and under only 16 bar, pressure which is similar to that of common gas refrigerants at the same operating temperature (for instance, p(CO2) ∼ 64 bar and p(R134a) ∼ 6 bar) and noticeably lower than p > 1000 bar of most solid barocaloric materials. Furthermore, MIL-53(Al) can operate in a very wide temperature range from 333 K down to 254 K, matching the operating requirements of most HVAC systems. Therefore, these findings offer new eco-friendly alternatives to the current refrigeration systems that can be easily adapted to existing technologies and open the door to the innovation of future cooling systems yet to be developed.This work was financially supported by Ministerio de Economía y Competitividad MINECO and EU-FEDER (projects MAT2017-86453-R and PDC2021-121076-I00), Xunta de Galicia and IACOBUS Programme. Funding for open access fee was provided by Universidade da Coruña/CISU
A relatively simple look at the rather complex crystallization kinetics of PLLA
[Abstract] This work demonstrates that, despite the existence of a significant number of works on PLA crystallization, there is still a relatively simple way, different from those already described, in which its complex kinetics can be observed. The X-ray diffraction (XRD) results presented here confirm that the PLLA under study crystallizes mostly in the α and α′ forms. An interesting observation is that at any temperature in the studied range of the patterns, the X-ray reflections stabilize with a given shape and at a given angle, different for each temperature. That means that both α and α′ forms coexist and are stable at the same temperatures so that the shape of each pattern results from both structures. However, the patterns obtained at each temperature are different because the predominance of one crystal form over the other depends on temperature. Thus, a two-component kinetic model is proposed to account for both crystal forms. The method involves the deconvolution of the exothermic DSC peaks using two logistic derivative functions. The existence of the rigid amorphous fraction (RAF) in addition to the two crystal forms increases the complexity of the whole crystallization process. However, the results presented here show that a two-component kinetic model can reproduce the overall crystallization process fairly well over a broad range of temperatures. The method used here for PLLA may be useful for describing the isothermal crystallization processes of other polymers
The Complexity of Lignin Thermal Degradation in the Isothermal Context
[Abstract] Thermal degradation of lignin in nitrogen atmosphere is evaluated by linear heating and isothermal tests. While linear heating suggests that thermal decomposition in the 200–400 °C range mainly consists of a single step, a careful analysis of isothermal tests points to different lignin fractions having different stabilities. This is an important point for practical predictions, since kinetics obtained as if the degradations at different temperatures were the same would lack practical utility. Instead, stairway type tests are proposed to evaluate the degradation rates and sample quantities involved at the temperatures of interest.This research was funded by MINECO, grant number MTM2017-82724-R and by Xunta de Galicia (Grupos de Referencia Competitiva ED431C-2020-14 and Centro de Investigación del Sistema universitario de Galicia ED431G 2019/01), all of them through the ERDFXunta de Galicia; ED431C-2020-14Xunta de Galicia; ED431G 2019/0
A Logistic Approach for Kinetics of Isothermal Pyrolysis of Cellulose
[Abstract] A kinetic model is proposed to fit isothermal thermogravimetric data obtained from cellulose in an inert atmosphere at different temperatures. The method used here to evaluate the model involves two steps: (1) fitting of single time-derivative thermogravimetric curves (DTG) obtained at different temperatures versus time, and (2) fitting of the rate parameter values obtained at different temperatures versus temperature. The first step makes use of derivative of logistic functions. For the second step, the dependence of the rate factor on temperature is evaluated. That separation of the curve fitting from the analysis of the rate factor resulted to be very flexible since it proved to work for previous crystallization studies and now for thermal degradation of celluloseMinisterio de Asuntos Económicos y Transformación Digital; MTM2017-82724-RXunta de Galicia; ED431C-2020-14Xunta de Galicia; ED431G 2019/0
Thermal and rheological comparison of adhesives
This version of the article has been accepted for publication, after peer review and is subject to Springer Nature’s AM terms of use, but is not the Version of Record and does not reflect post-acceptance improvements, or any corrections. The Version of Record is available online at: https://doi.org/10.1007/s10973-019-08882-6[Abstract]: In some industrial sectors such as naval construction, the use of adhesives is still limited to some specific applications. However, shipbuilders, academia and classification societies are cooperating to expand the field of certificated applications of adhesive joints. As a part of a validation study, thermal and rheological studies of the curing process and of the cured adhesives should be included. While a neat glass transition and other relaxation processes can be normally identified by ramp temperature tests performed both on a differential scanning calorimeter or on a rheometer, there are some adhesive systems in which several glass transitions or melting or crystallization processes overlap. Applying a thermal treatment to delete the thermal history and conditioning are common practices to clarify what happens in complex systems. However, although that practices usually help, there are still some complexities due to overlapping processes that cannot be easily understood. An important point of this work is to show how differential scanning calorimetry (DSC) and rheology complement to each other in order to demonstrate several thermal relaxations and to obtain a better understanding of the cure process. The use of two different techniques along with a careful election of the setup parameter values allows to better interpret the thermal events. In addition, thermogravimetry (TG) helps to understand some rheological behaviors. In the end,this work shows how a good insight of the adhesive properties can be obtained by means of the combined use of DSC, rheology and TG.This research has been partially supported by the Spanish Ministry of Science and Innovation,
Grants MTM2014-52876-R and MTM2017–82724-R and by UMI UDC-Navanti
Properties of Mosquito Repellent-Plasticized Poly(lactic acid) Strands
This article belongs to the Special Issue Thermal and Rheological Characterization of Polymeric Materials[Abstract] Poly(lactic acid) (PLA) is an attractive candidate for replacing petrochemical polymers because it is fully biodegradable. This study investigated the potential of PLA as a sustainable and environmentally friendly alternative material that can be developed into commercially viable wearable mosquito repellent devices with desirable characteristics. PLA strands containing DEET and IR3535 were prepared by twin screw extrusion compounding and simultaneously functioned as plasticizers for the polymer. The plasticizing effect was investigated by thermal and rheological studies. DSC studies showed that the addition of DEET and IR3535 into PLA strands reduced the glass transition temperature consistent with predictions of the Fox equation, thus proving their efficiency as plasticizers. The rheology of molten samples of neat PLA and PLA/repellents blends, evaluated at 200 °C, was consistent with shear-thinning pseudoplastic behaviour. Raman studies revealed a nonlinear concentration gradient for DEET in the PLA strand, indicating non-Fickian Type II transport controlling the desorption process. Release data obtained at 50 °C showed initial rapid release followed by a slower, near constant rate at longer times. The release rate data were fitted to a novel modification of the Peppas-Sahlin desorption modelThis work was financially supported from the Deutsche Forschungsgemeinschaft (DFG), Germany [Grant number AN 212/22-2] and University of Pretoria (UP) Postdoctoral Fellowship programme. The research has been also supported by Spanish MINECO grant MTM2017-82724-R through the ERDFDeutsche Forschungsgemeinschaft (DFG); AN 212/22-2https://www.mdpi.com/journal/molecules/special_issues/Thermal_Rheological_Polymeric_Material
Impact estimates of the actions for the rehabilitation of energy efficiency in residential building
The prediction of energy savings and indoor air quality resulting from the implementation of rehabilitation measures for energy efficiency in residential buildings is paramount to invest in the right technology and optimize available resources. In this paper, we propose a new methodology, based on actual data collection, to quickly and effectively assess energy efficiency and air quality of housings, considering variables such as the customs of the occupants, regulations and the constructive typology. The effect corresponding to the reforms carried out for energy efficiency rehabilitation in four homes built at different periods, under different rules, with different levels of occupancy and characteristics of its constructive elements is evaluated successfully
Dynamic rheological comparison of silicones for podiatry applications
Manuscrito aceptado[Abstract]: This work shows an effective methodology to evaluate the dynamic viscoelastic behavior of silicones for application in podiatry. The aim is to characterize, compare their viscoelastic properties according to the dynamic stresses they can be presumably subjected when used in podiatry orthotic applications. These results provide a deeper insight which extends the previous creep-recovery results to the world of dynamic stresses developed in physical activity. In this context, it shoulod be taken into account that an orthoses can subjected to a set of static and dynamic shear and compressive forces.Xunta de Galicia; ED431C-2016-015Xunta de Galicia; ED431G/01This research has been supported by the Spanish Ministry of Science and Innovation,
MINECO grants MTM2014-52876-R and MTM2017-82724-R, and by the Xunta de Galicia
(Grupos de Referencia Competitiva ED431C-2016-015 and Centro Singular de Investigación
de Galicia ED431G/01), all of them through the ERD
- …