On the Polarization of H-alpha Lines Scattered by Neutral Hydrogen in Active Galactic Nuclei

Raman scattering by atomic hydrogen converts the UV continuum around Ly$\beta$ into optical continuum around H$\alpha$, and the basic atomic physics has been discussed in several works on symbiotic stars. We propose that the same process may operate in active galactic nuclei (AGN) and calculate the linear polarization of the broad emission lines Raman-scattered by a high column neutral hydrogen compnent. The conversion efficiency of the Raman scattering process is discussed and the expected scattered flux is computed using the spectral energy distribution of an AGN given by a typical power law. The high column H {\sc i} component in AGN is suggested by many observations encompassing radio through UV and X-ray ranges. When the neutral hydrogen component with a column density $\sim 10^{22} cm^{-2}$ is present around the active nucleus, it is found that the scattered H$\alpha$ is characterized by a very broad width $\sim 20,000 km/s$ and that the strength of the polarized flux is comparable to that of the electron-scattered flux expected from a conventional unified model of narrow line AGN. The width of the scattered flux is mainly determined by the column density of the neutral scatterers where the total scattering optical depth becomes of order unity. The asymmetry in the Raman scattering cross section around Ly$\beta$ introduces red asymmetric polarized profiles around H$\alpha$. The effects of the blended Ly$\beta$ and O {\sc vi} 1034 doublet are also investigated. We briefly discuss the spectropolarimetric observations performed on the Seyfert galaxy IRAS 110548-1131 and the narrow line radio galaxy Cyg A.Comment: 11 pages, 6 figures, accepted for publication in MNRA

An analytical solution for the elastoplastic response of a continuous fiber composite under uniaxial loading

A continuous fiber composite is modelled by a two-element composite cylinder in order to predict the elastoplastic response of the composite under a monotonically increasing tensile loading parallel to fibers. The fibers and matrix are assumed to be elastic-perfectly plastic materials obeying Hill's and Tresca's yield criteria, respectively. Here, the composite behavior when the fibers yield prior to the matrix is investigated

A micromechanics model of the stiffness and strength of laminates with fiber waviness

A mathematical model based on the Euler-Bernoulli beam theory is proposed for predicting the effective Young's moduli of piecewise isotropic composite laminates with local ply curvatures in the main load-carrying layers. Strains in corrugated layers, In-Phase layers, Out-of-Phase layers are predicted for various geometries and material configurations by assuming matrix layers as elastic foundations of different spring constants. The effective Young's moduli measured from corrugated aluminum specimens and aluminum/epoxy specimens with In-Phase and Out-of-Phase wavy patterns coincide very well with the model predictions. Moire fringe analysis of an In-Phase specimen and an Out-of-Phase specimen are also presented confirming the main assumption of the model related to the elastic constraint due to the matrix layers. The present model is also compared with the experimental results and other models, including the micro-buckling models, published in the literature. The results of the present study show that even a very small scale local ply curvature produces a noticeable effect on the mechanical constitutive behavior of a laminated composite

Atmospheric Argon Free burning Arcs with a Simplified Unified Model Using CFD-Arc Modeling

Free burning arcs, where the work piece acts as an anode, are frequently used for a number of applications. Our investigation is exclusively concerned with a simplified unified model of arcs and their electrodes under steady state conditions at atmospheric pressure. The model is used to make predictions of arc and electrode temperatures and arc voltage for a 200 A arc in argon. The computed temperatures along the axis between the cathode tip and the anode surface compare well the measured data

Formation of high-quality Ag-based ohmic contacts to p-type GaN

Low resistance and high reflectance ohmic contacts on p-type GaN were achieved using an Ag-based metallization scheme. Oxidation annealing was the key to achieve ohmic behavior of Ag-based contacts on p-type GaN. A low contact resistivity of similar to 5x10(-5) Omega cm(2) could be achieved from Me (=Ni, Ir, Pt, or Ru)/Ag (50/1200 angstrom) contacts after annealing at 500 degrees C for 1 min in O(2) ambient. Oxidation annealing promoted the out-diffusion of Ga atoms from the GaN layer, and Ga atoms dissolved in the in-diffused Ag layer with the formation of Ag-Ga solid solution, resulting in ohmic contact formation. Using Ru/Ni/Au (500/200/500 angstrom) overlayers on the Me/Ag contacts, the excessive incorporation of oxygen molecules into the contact interfacial region, and the out-diffusion and agglomeration of Ag, were effectively prevented during oxidation annealing. As a result, a high reflectance of 87.2% at the 460 nm wavelength and a smooth surface morphology could be obtained simultaneously. (C) 2008 The Electrochemical Society.open111618sciescopu

Determination of Cutting Date and Interval on Native Grass Management of Agricultural Waterways in South Korea

Agricultural waterways provide a buffer zone between crop fields and adjacent rivers or streams. Waterways are important resource for agriculture water management, water quality and biodiversity conservation. The total linear distance of waterway in Korea is about 180,000 km, and about 40% are concrete and about 60% are grassed waterways. At present, the percentage of concrete waterways is increasing because of their water management efficiency. Some argue that continued expansion of concrete waterways is not sustainable because it leads to potential-degradation of the earth\u27s environment. This concern has led to renewed efforts to use grassed waterways as an alternative to concrete. In addition, grassed waterways enhance the environment-friendly image of agriculture that Korea farmers want to promote. The objective of this experiment was to determine the effect of cutting date and interval of native grasses for water management efficiency of agricultural waterway

Universal factorization property of certain polycyclic groups

AbstractLet H be a torsion-free strongly polycyclic (torsion-free virtually polycyclic, resp.) group. Let G be any group with maximal condition. We show that there exists a torsion-free strongly polycyclic (torsion-free virtually polycyclic, resp.) group G˜ and an epimorphism ε:G→G˜ such that for any homomorphism ϕ:G→H, it factors through G˜, i.e., there exists a homomorphism ϕ˜:G˜→H such that ϕ=ϕ˜∘ε. We show that this factorization property cannot be extended to any finitely generated group G. As an application of factorization, we give necessary and sufficient conditions for N(f,g)=R(f,g) to hold for maps f,g:X→Y between closed orientable n-manifolds where π1(X) has the maximal condition, Y is an infra-solvmanifold, N(f,g) and R(f,g) denote the Nielsen and Reidemeister coincidence numbers, respectively