604 research outputs found
Prediction Forecast for Culex tritaeniorhynchus Populations in Korea
AbstractObjectivesJapanese encephalitis is considered as a secondary legal infectious disease in Korea and is transmitted by mosquitoes in the summer season. The purpose of this study was to predict the ratio of Culex tritaeniorhynchus to all the species of mosquitoes present in the study regions.MethodsFrom 1999 to 2012, black light traps were installed in 10 regions in Korea (Busan, Gyeonggi, Gangwon, Chungbuk, Chungnam, Jeonbuk, Jeonnam, Gyeongbuk, Gyeongnam, and Jeju) to capture mosquitoes for identification and classification under a dissecting microscope. The number of mosquitoes captured/week was used to calculate its daily occurrence (mosquitoes/trap/night). To predict the characteristics of the mosquito population, an autoregressive model of order p (AR(p)) was used to execute the out-of-sample prediction and the in-sample estimation after presumption.ResultsCompared with the out-of-sample method, the sample-weighted regression method's case was relatively superior for prediction, and this method predicted a decrease in the frequency of Cx. tritaeniorhynchus for 2013. However, the actual frequency of this species showed an increase in frequency. By contrast, the frequency rate of all the mosquitoes including Cx. tritaeniorhynchus gradually decreased.ConclusionThe number of patients with Japanese encephalitis has been strongly associated with the occurrence and density of vector mosquitoes, and the importance of this infectious disease has been highlighted since 2010. The 2013 prediction indicated an increase after an initial decrease, although the ratio of the two mosquito species decreased. The increase in vector density may be due to changes in temperature and the environment. Thus, continuous prevalence prediction is warranted
High-Performance Screen-Printed Thermoelectric Films on Fabrics.
Printing techniques could offer a scalable approach to fabricate thermoelectric (TE) devices on flexible substrates for power generation used in wearable devices and personalized thermo-regulation. However, typical printing processes need a large concentration of binder additives, which often render a detrimental effect on electrical transport of the printed TE layers. Here, we report scalable screen-printing of TE layers on flexible fiber glass fabrics, by rationally optimizing the printing inks consisting of TE particles (p-type Bi0.5Sb1.5Te3 or n-type Bi2Te2.7Se0.3), binders, and organic solvents. We identified a suitable binder additive, methyl cellulose, which offers suitable viscosity for printability at a very small concentration (0.45-0.60 wt.%), thus minimizing its negative impact on electrical transport. Following printing, the binders were subsequently burnt off via sintering and hot pressing. We found that the nanoscale defects left behind after the binder burnt off became effective phonon scattering centers, leading to low lattice thermal conductivity in the printed n-type material. With the high electrical conductivity and low thermal conductivity, the screen-printed TE layers showed high room-temperature ZT values of 0.65 and 0.81 for p-type and n-type, respectively
Recommended from our members
iPSC Modeling of Presenilin1 Mutation in Alzheimer's Disease with Cerebellar Ataxia.
Disease modeling of Alzheimer's disease (AD) has been hampered by the lack of suitable cellular models while animal models are mainly based on the overexpression of AD-related genes which often results in an overemphasis of certain pathways and is also confounded by aging. In this study, we therefore developed and used induced pluripotent stem cell (iPSC) lines from a middle-aged AD patient with a known presenilin 1 (PSEN1) mutation (Glu120Lys; PS1-E120K) and as a control, an elderly normal subject. Using this approach, we demonstrated that the extracellular accumulation of Aβ was dramatically increased in PS1-E120K iPSC-derived neurons compared with the control iPSC line. PS1-E120K iPSC-derived neurons also exhibited high levels of phosphorylated tau, as well as mitochondrial abnormalities and defective autophagy. Given that the effect of aging is lost with iPSC generation, these abnormal cellular features are therefore indicative of PSEN1-associated AD pathogenesis rather than primary changes associated with aging. Taken together, this iPSC-based approach of AD modeling can now be used to better understand AD pathogenesis as well as a tool for drug discovery.This work was supported by the Korea Health Technology R&D Project through the Korea Health Industry Development Institute (KHIDI), funded by the Ministry of Health & Welfare, Republic of Korea (HI14C2746) and a grant (2016-0588) from the Asan Institute for Life Sciences
Pilot KaVA monitoring on the M87 jet: confirming the inner jet structure and superluminal motions at sub-pc scales
We report the initial results of our high-cadence monitoring program on the
radio jet in the active galaxy M87, obtained by the KVN and VERA Array (KaVA)
at 22 GHz. This is a pilot study that preceded a larger KaVA-M87 monitoring
program, which is currently ongoing. The pilot monitoring was mostly performed
every two to three weeks from December 2013 to June 2014, at a recording rate
of 1 Gbps, obtaining the data for a total of 10 epochs. We successfully
obtained a sequence of good quality radio maps that revealed the rich structure
of this jet from <~1 mas to 20 mas, corresponding to physical scales
(projected) of ~0.1-2 pc (or ~140-2800 Schwarzschild radii). We detected
superluminal motions at these scales, together with a trend of gradual
acceleration. The first evidence for such fast motions and acceleration near
the jet base were obtained from recent VLBA studies at 43 GHz, and the fact
that very similar kinematics are seen at a different frequency and time with a
different instrument suggests these properties are fundamental characteristics
of this jet. This pilot program demonstrates that KaVA is a powerful VLBI array
for studying the detailed structural evolution of the M87 jet and also other
relativistic jets.Comment: 10 pages, 9 figures, accepted for publication in PAS
Realizing high thermoelectric performance in n-type se-free bi2te3 materials by spontaneous incorporation of fete2 nanoinclusions
Early View: Online Version of Record before inclusion in an issue.Bi2Te3-based materials have drawn much attention from the thermoelectric community due to their excellent thermoelectric performance near room temperature. However, the stability of existing n-type Bi2(Te,Se)3 materials is still low due to the evaporation energy of Se (37.70 kJ mol−1) being much lower than that of Te (52.55 kJ mol−1). The evaporated Se from the material causes problems in interconnects of the module while degrading the efficiency. Here, we have developed a new approach for the high-performance and stable n-type Se-free Bi2Te3-based materials by maximizing the electronic transport while suppressing the phonon transport, at the same time. Spontaneously generated FeTe2 nanoinclusions within the matrix during the melt-spinning and subsequent spark plasma sintering is the key to simultaneous engineering of the power factor and lattice thermal conductivity. The nanoinclusions change the fermi level of the matrix while intensifying the phonon scattering via nanoparticles. With a fine-tuning of the fermi level with Cu doping in the n-type Bi2Te3–0.02FeTe2, a high power factor of ~41 × 10−4 Wm−1 K−2 with an average zT of 1.01 at the temperature range 300–470 K are achieved, which are comparable to those obtained in n-type Bi2(Te,Se)3 materials. The proposed approach enables the fabrication of high-performance n-type Bi2Te3-based materials without having to include volatile Se element, which guarantees the stability of the material. Consequently, widespread application of thermoelectric devices utilizing the n-type Bi2Te3-based materials will become possible.This research was supported by Nano·Material Technology Development Program through the National Research Foundation of Korea (NRF) funded by the Ministry of Science and ICT (2022M3H4A1A04076667).Peer reviewe
Dense dislocation arrays embedded in grain boundaries for high-performance bulk thermoelectrics
The widespread use of thermoelectric technology is constrained by a relatively low conversion efficiency of the bulk alloys, which is evaluated in terms of a dimensionless figure of merit (zT). The zT of bulk alloys can be improved by reducing lattice thermal conductivity through grain boundary and point-defect scattering, which target low- and high-frequency phonons. Dense dislocation arrays formed at low-energy grain boundaries by liquid-phase compaction in Bi_(0.5)Sb_(1.5)Te_3 (bismuth antimony telluride) effectively scatter midfrequency phonons, leading to a substantially lower lattice thermal conductivity. Full-spectrum phonon scattering with minimal charge-carrier scattering dramatically improved the zT to 1.86 ± 0.15 at 320 kelvin (K). Further, a thermoelectric cooler confirmed the performance with a maximum temperature difference of 81 K, which is much higher than current commercial Peltier cooling devices
- …