Effect of Tunnel Configuration and Testing Technique on Cascade Performance

An investigation has been conducted to determine the influence of aspect ratio, boundary-layer control by means of slots and porous surfaces, Reynolds number, and tunnel end-wall condition upon the performance of airfoils in cascades. A representative compressor-blade section (the NACA 65-(12)(10) of aspect ratios of 1, 2, and 4 has been tested at low speeds in cascades with solid and with porous side walls. Two-dimensional flow was established in porous-wall cascades of each of the three aspect ratios tested; the flow was not two-dimensional in any of the solid-wall cascades. Turbine-blade sections of aspect ratio 0.83 were tested in cascades with solid and porous side walls and blade sections of aspect ratio 3.33 were tested in cascades with solid wall. No particular advantage was observed in the use of porous walls for the turbine cascades tested

C-C bond-forming reactions of ground-state aryl halides under reductive activation

Under basic conditions aryl halides can undergo SRN1 reactions, BHAS reactions and benzyne formations. Appropriate complex substrates afford an opportunity to study inherent selectivities. SRN1 reactions are usually favoured under photoactivated conditions, but this paper reports their success using ground-state and transition metal-free conditions. In benzene, the enolate salt 12, derived by deprotonation of diketopiperazine 11, behaves as an electron donor, and assists the initiation of the reactions, but in DMSO, it is not required. The outcomes are compared and contrasted with a recent photochemical study on similar substrates. A particular difference is the prevalence of hydride shuttle reactions under relatively mild thermal conditions

Systematic two-dimensional cascade tests of NACA 65-series compressor blades at low speeds

A two-dimensional low-speed porous-wall cascade tunnel investigation has been conducted to establish the performance of the NACA 65-series compressor blade sections over the useful range of inlet angle, solidity, and section camber. Design points for optimum high-speed operation are presented. The loading limitation is determined for some conditions. Trends of section operating range with increasing section camber are determined for the four inlet angles tested

NASA Sea Ice Validation Program for the Defense Meteorological Satellite Program Special Sensor Microwave Imager

The history of the program is described along with the SSM/I sensor, including its calibration and geolocation correction procedures used by NASA, SSM/I data flow, and the NASA program to distribute polar gridded SSM/I radiances and sea ice concentrations (SIC) on CD-ROMs. Following a discussion of the NASA algorithm used to convert SSM/I radiances to SICs, results of 95 SSM/I-MSS Landsat IC comparisons for regions in both the Arctic and the Antarctic are presented. The Landsat comparisons show that the overall algorithm accuracy under winter conditions is 7 pct. on average with 4 pct. negative bias. Next, high resolution active and passive microwave image mosaics from coordinated NASA and Navy aircraft underflights over regions of the Beaufort and Chukchi seas in March 1988 were used to show that the algorithm multiyear IC accuracy is 11 pct. on average with a positive bias of 12 pct. Ice edge crossings of the Bering Sea by the NASA DC-8 aircraft were used to show that the SSM/I 15 pct. ice concentration contour corresponds best to the location of the initial bands at the ice edge. Finally, a summary of results and recommendations for improving the SIC retrievals from spaceborne radiometers are provided

NACA Research Memorandums

The performance of NACA 65-series compressor blade sections in cascade has been investigated systematically in a low-speed cascade tunnel

Analysis of Fcγ receptor haplotypes in rheumatoid arthritis: FCGR3A remains a major susceptibility gene at this locus, with an additional contribution from FCGR3B

The Fcγ receptors play important roles in the initiation and regulation of many immunological and inflammatory processes, and genetic variants (FCGR) have been associated with numerous autoimmune and infectious diseases. The data in rheumatoid arthritis (RA) are conflicting and we previously demonstrated an association between FCGR3A and RA. In view of the close molecular proximity with FCGR2A, FCGR2B and FCGR3B, additional polymorphisms within these genes and FCGR haplotypes were examined to refine the extent of association with RA. Biallelic polymorphisms in FCGR2A, FCGR2B and FCGR3B were examined for association with RA in two well characterized UK Caucasian and North Indian/Pakistani cohorts, in which FCGR3A genotyping had previously been undertaken. Haplotype frequencies and linkage disequilibrium were estimated across the FCGR locus and a model-free analysis was performed to determine association with RA. This was followed by regression analysis, allowing for phase uncertainty, to identify the particular haplotype(s) that influences disease risk. Our results reveal that FCGR2A, FCGR2B and FCGR3B were not associated with RA. The haplotype with the strongest association with RA susceptibility was the FCGR3A–FCGR3B 158V-NA2 haplotype (odds ratio 3.18, 95% confidence interval 1.13–8.92 [P = 0.03] for homozygotes compared with all genotypes). The association was stronger in the presence of nodules (odds ratio 5.03, 95% confidence interval 1.44–17.56; P = 0.01). This haplotype was also more common in North Indian/Pakistani RA patients than in control individuals, but not significantly so. Logistic regression analyses suggested that FCGR3A remained the most significant gene at this locus. The increased association with an FCGR3A–FCGR3B haplotype suggests that other polymorphic variants within FCGR3A or FCGR3B, or in linkage disequilibrium with this haplotype, may additionally contribute to disease pathogenesis

Electrographic seizures during low-current thalamic deep brain stimulation in mice.

BACKGROUND Deep brain stimulation of central thalamus (CT-DBS) has potential for modulating states of consciousness, but it can also trigger electrographic seizures, including poly-spike-wave trains (PSWT). OBJECTIVES To report the probability of inducing PSWTs during CT-DBS in awake, freely-moving mice. METHODS Mice were implanted with electrodes to deliver unilateral and bilateral CT-DBS at different frequencies while recording EEG. We titrated stimulation current by gradually increasing it at each frequency until a PSWT appeared. Subsequent stimulations to test arousal modulation were performed at the current one step below the current that caused a PSWT during titration. RESULTS In 2.21% of the test stimulations (10 out of 12 mice), CT-DBS caused PSWTs at currents lower than the titrated current, at currents as low as 20 μA. CONCLUSION Our study found a small but significant probability of inducing PSWTs even after titration and at relatively low currents. EEG should be closely monitored for electrographic seizures when performing CT-DBS in both research and clinical settings

Damage analysis and fracture toughness evaluation in a thin woven composite laminate under static tension using infrared thermography

This work deals with the issue of damage growth in thin woven composite laminates subjected to tensile loading. The conducted tensile tests were monitored on-line with an infrared camera, and tested specimens were analysed using Scanning Electron Microscopy (SEM). Combined with SEM micrographs, observation of heat source fields enabled us to assess the damage sequence. Transverse weft cracking was confirmed to be the main damage mode and fiber breakage was the final damage leading to failure. For cracks which induce little variation of specimen stiffness, the classic “Compliance method” could not be used to compute energy release rate. Hence, we present here a new procedure based on the estimation of heat source fields to calculate the energy release rate associated with transverse weft cracking. The results are then compared to those computed with a simple 3D inverse model of the heat diffusion problem and those presented in the literature